Skeletool Release Date?
-
If nothing else, the Skeletool will be a success for Leatherman because of the buzz it has created. No tool intro since the Vic Spirit has had people chattering so much about it.
That's true, and companies HAVE to take risks now and then or else they will get passed by. Some fail, some succeed but it is true that it has people talking about it. And even if it does fail it may point new people to look at Leatherman's other products.
I applaud LM for going "smaller" when the rest of the market is going bigger and/or heavier. I am one of those who likes smaller/lighter tools. I don't like to wear sheaths. If you want a huge tool with a lot of tools you have plenty to choose from.
However, if you want a REAL pocket(as opposed to a sheath) tool it's a much smaller market. The mini tool wasn't all that great, they've discontinued the Side Clip so now we've got the Kick with a pocket clip. And the Juice models. They're OK but I'd like more selection. Most of what I've seen from Gerber and Victorinox is too big to pocket carry for most people. I consider anything over 4" and 4-5oz to be too big for pocket carry. Also, the tool companies haven't offered too many with pocket clips which still confuses me. Leatherman has a few but I don't recall Gerber or Vic. offering any that way.
Like I said before, I hope it does work for them, if not maybe at least it will make other manufacturers take a second look at the smaller tool market. I'm sure I'm not the only one who wants a pocket Multi-tool with the basic tools. Of course the pliers then maybe a Phillips screwdriver , a couple of straight ones, a can and bottle opener and a locking blade. All of this around 4" long and under 6oz. Is someone who can make this happen listening?!?!?!?!
-
This tool might win over lots of people who carry folders already, but didn't want a pair of pliers on their belt. I know over at edcforums.com there are a lot of guys who carry the bare minimum stuff and consolodate a lot of things. The Skeletool with a higher end blade steel, pocket clip, and caribiner might have these guys as buyers.
-
I guess I'm one of the guys it might win over. Right now I have a Leatherman Wave in my coat pocket and a SAK in my pants pocket. (Fine for winter but not summer in the south.) I tend to use the pliers and screwdrives, knife and not much else. A small SAK Classic on my keychain handles small chores. Don't get me wrong - I have a Swisstool CS Plus and CRK Sebenza in my kit but at work or running to the store the Skeletool might be perfect. Then again maybe not. I like the idea and want to give it a try to see if I can lighten the load and leave the heavier options in my bag for when I really need them.
One other thought. The skeletool might be good to take along when I shoot pictures at the beach. I need the bits if I adjust my equipment anyway so I hope I can just load that bit in the extra holder, clip the Skeletool to my shorts and not have the extra weight or bulk.
-
Ducktapehero -I'm a bit bewildered that "Fairy land" can be considered insulting, but as these things are by the receiver, I'm happy to apologise for any offence you've taken.
As for the Skeletool. I have no idea what the costs of design, marketing, and establishing new manufacturing processes are, but I see no reason why the Skele would be a flop. It may not be as big a hit as the Wave, but LM has been dabbling in the Blade-based Multis for a bit now (The 500 series with 3.1" blades are possibly illegal carry in some countries).
Either they've got enough money to bandy about on daft ideas, or we, BobConsumer, have shown an interest in combining a "full size" folder with pliers, perhaps without the bulk of the Surge.It doesn't personally appeal to me, it appears to have more "ass than class" as they say, but that just means it won't have a legacy in 25 years, not that it won't sell well now - however it could very well be one of those "Stepping Stone" tools, on the road between the Wave - One handed outside opening blades, and whatever the next good idea is (I'm not sure than carabiners will become an industry standard, but one can never tell)
-
As for the Skeletool. I have no idea what the costs of design, marketing, and establishing new manufacturing processes are, but I see no reason why the Skele would be a flop.
I hope you're right.
-
As for the Skeletool. I have no idea what the costs of design, marketing, and establishing new manufacturing processes are, but I see no reason why the Skele would be a flop.
I hope you're right.
If they are putting a premium steel blade in the skeletool I doubt that it would be a flop. However, stranger things have happened. For the record, I am going to buy one when they come out. Whether or not I like it only time will tell. It does have appeal to those who carry a folder but dont want to carry a larger pliers based tool on the belt. I will have a hard time overcoming the caribiner thing though. If it has a pocket clip why then must the caribiner be a permanant part of the handle. I guess I will just buy one to find out.
-
We've been wondering what the difference between the Skeletool and the Freestyle might be. Maybe they drop the carabiner on the Freestyle?
-
I think I'd prefer it without the Carabiner
.
I think I would also. It does work really well as a bottle opener thought. At least the one on the folders do. -
I'd prefer a can opener over a bottle opener. It's quite easy to open a bottle with a lot of things. The pliers on most multi-tools will do it. Opening cans are a bit tougher.
-
@ducktapehero said:
I'd prefer a can opener over a bottle opener. It's quite easy to open a bottle with a lot of things. The pliers on most multi-tools will do it. Opening cans are a bit tougher.I don't think I'd ever use a can opener on a multi. Seems like too much effort to me.
-
Seems like too much effort to me.
It just takes practice. Of course I HATE the can opener my wife has so if I'm opening a can the multi-tool or SAK I have on me at the time gets the job done.
-
I am actually incapable of using an electric can opener. My parents had them when I was growing up and I could either never get the can to stay in it, or when I did, the can would pop out halfway through. Since striking out on my own years ago I have owned a variety of manual can openers, and many I find are good for a little while, but eventually either break or fall apart. SAKs and multis don't have that problem, and I always have them handy!
I also have tried "nicer" manual can openers like this one:

They are a little easier than a SAK or multi, but also tend to leave razor sharp edges. I know many of them advertise that they don't nowadays, but until my current one breaks I won't bother replacing it. This is the kind I have now:

Def
-
I have the same as the one you currently use as well. Does the job for me.
-
@Defender said:
They are a little easier than a SAK or multi, but also tend to leave razor sharp edges. I know many of them advertise that they don't nowadays, but until my current one breaks I won't bother replacing it. This is the kind I have now:
Def
You need a multitool or a SAK with a fold-out can opener like that one... :)
-
Ra-Ra, I love the old manual Sak (or more specifically, BAK, for my allegiance) Can openers, but I am a modern man, with microfibre shirts and a manicure, so I use a spinny-bladey sort.
They are a little easier than a SAK or multi, but also tend to leave razor sharp edges. I know many of them advertise that they don't nowadays, but until my current one breaks I won't bother replacing it.
There are two general types - one that cuts vertically - into the lid.
and one that cuts horizontally, into the side of the can.The latter is, in addition to for some reason being the more popular, also the devil's work and should be expunged from this world.
Both advertise "No Sharp Edges" - and both lie. One leaves sharp edges on the remaining lid, and one leaves sharp edges on the remaining can.Erh, carry on, go about your business.
Skeletool eh? -
lol that's called a "Rant" Nomad and you did it really good!

-
http://www.sinistershop.com/Images4web/G82_canopener.jpg
I've used these kind all my life. They last for a few years then one of the rivets either pops or gets too loose. I lubricate the moving parts with veggie oil when it starts to seize up or squeak.
I've used SAK can openers from time to time, just to see how they worked.
-
In the kitchen I use the SAK can opener the most. I can open a can with that just as fast as one of the manual twisty thingys.
-
I know that when I have no choice but to "Help out" in the kitchen I use the Can opener on my SAK's too.When My Spouse asks me"Why are You using that,when we have a perfectly good can opener" I tell her"It's a Man thing,and I am getting my moneys worth out of the knife".I dont think that I will buy one but the Skeletool looks like a pretty neat option in the world of MultiTools,seems perfect for the occasional user or the Wife's purse.
Dtrain :sak:
:tool: 
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login