Leatherman Charge SLV
-
@Mike D said:
Damn thats a bummer about the sheath. I like the standard leather sheaths with the elastic sides right up till you put the extra bits into them, then the thing just gets too tight trying to get the multi in and out for my taste. So I usually dont carry the extra bits at all, which is kind of a bumer cause I would like to. I was hoping since that sheath was pre-molded it would fit the bits and the knife better.It should fit them better, but it doesn't. :(
Which sheath are you describing? The black leather one with the big metal LEATHERMAN logo plate?
-
Here's a JPG of the Charge SLV advertisement from September 2007.

-
@supratentorial said:
Here's a JPG of the Charge SLV advertisement from September 2007.Hehe, you didn't read this thread from the beginning, did you? :pok: ;)
-
I thought I'd take the discussion full circle. ;)
-
@supratentorial said:
I thought I'd take the discussion full circle. ;)Good recovery! :D
-
That sheath is designed for the leatherman line of knives, on the h502 I own it uses that sheath. And I agree, the leather ones are much better than that nylon one that is produced for the knife line.
David
-
Damn thats a bummer about the sheath. I like the standard leather sheaths with the elastic sides right up till you put the extra bits into them, then the thing just gets too tight trying to get the multi in and out for my taste. So I usually dont carry the extra bits at all, which is kind of a bumer cause I would like to. I was hoping since that sheath was pre-molded it would fit the bits and the knife better.
It should fit them better, but it doesn't. :(
Which sheath are you describing? The black leather one with the big metal LEATHERMAN logo plate?
Yep thats the one. The sheaths for the Charge/Waves. As soon as I put the bit holder in with the tool it becomes to hard to get out easily. I dont like to have to fumble around with two hands to remove the tool, and thats exactly what happens when the plastic bit holder is in the sheath with the tool. The ALX I have is worst of the three, and the tool I carry most at work because of the multiple bit drivers. The screw heads on the pivots stick out further then on the TTi or the Wave, and when you put the bit holder in there the thing is not only hard to get out, but it snags the elastic on the bottom inside of the sheath that holds the bit holder in there.
Do they loosen up over time? Maybe I just havent given it a fair shake, eventhough in the case of the ALX snagging the elastic I dont see this ever getting better.
-
Gotta say I agree with you there, it's not likely to improve much with time. Because of the too-tightness, I actually prefer the standard nylon sheath for the Charge over the black leather one.
-
Well I may have to try one of the nylon ones I guess. What I would like to know, was why didnt they just make the whole thing out of leather in the first place, put two slabs of leather in the back to hold the bit holder and just be done. None of the Charges are cheap, I think the price completely justifies a nicer sheath.
-
I've been toting one of those SLV models since Christmas morning...it's been working like a champ! I ditched the sheath though...I'm using the older nylon sheath instead. I figure if I anticipate needing the extra bits, the little bit sleeve holder is thin enough to drop in a pants pocket. I actually had quit carrying multi-tools for a while until this one came along. Really nice to have it on my side and I forgot just how handy these critters are!
-
@jtb49er2000 said:
I've been toting one of those SLV models since Christmas morning...it's been working like a champ! I ditched the sheath though...I'm using the older nylon sheath instead. I figure if I anticipate needing the extra bits, the little bit sleeve holder is thin enough to drop in a pants pocket. I actually had quit carrying multi-tools for a while until this one came along. Really nice to have it on my side and I forgot just how handy these critters are!Quit carrying multitools?!! Gadzooks man, bite your tongue! :o
Hehe, glad to have you back in the fold now...

-
Now we have you right where we want you.... >:D
Def
-
I have to admit that it got to be a bit of a hinderance...deciding which knife to carry, which multi-tool to strap to my side..should I carry 2 knives, etc. etc. So, I made it simple and finally got down to just one pocketknife! Of course now that's out the window...again. But the good news is, I've finally found the all illusive "perfect" multi-tool!! Yeah right, let's see how long it is until I'm drooling over the next greatest model!
Oh well, at least it makes life a little more interesting!!
-
How boring would life be if we only had one multitool?
Look at Benner as an example. He tried filling his life with meaningless things like beautiful women and his wonderful children, but they pale in comparison to the unbridled joy he gets from a growing tool and SAK collection!
Def
-
Haha!
-
I'm serious- look, he's only had two kids in a few years, but he got a dozen tools in 4 months!
Def
-
@Mike D said:
Do they loosen up over time? Maybe I just havent given it a fair shake, eventhough in the case of the ALX snagging the elastic I dont see this ever getting better.They do loosen up over time. Initially with my Charge TTi It was almost impossible for me to close the sheath even with just the tool alone. My old wave sheath is the same design, so I tried it in that, and it had room to fit the tool together with the bit card and the pocket clip. Figuring that the charge sheath would loosen up over time, I just pushed the tool and the card holder in. At first it was a very tight squeeze, but now it's loosened up to the point where I can take the tool out with one hand. I put the bit card in with the bits facing the belt loop and the flat side up against the tool, as the bit card seems to be shaped to be stored this way, and the bits used to snag on the elastic when stored the other way.
-
@Defender said:
How boring would life be if we only had one multitool?Look at Benner as an example. He tried filling his life with meaningless things like beautiful women and his wonderful children, but they pale in comparison to the unbridled joy he gets from a growing tool and SAK collection!
Def
:D The man's got a point! ;)
-
Costco in pgh has a $10 discount posted with these, yo get it automatically at the checkout.
-
Paid my first visit to Costco and surprise surprise they have the same set but without the nice case and it retails for £70-00 or about $140-00 who said ripoff Britain doesn't exist :ahhh
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



