Not what I expected- New Leatherman Tools
-
@Grant Lamontagne said:
Leatherman is using these to introduce the Leatherman brand to people who wouldn't spend a lot on a tool, who know nothing about tools, and who wouldn't normally even put enough effort or thought into one to bother doing research on sites like this one to find out about which one is best.
So these are for stupid people then? ;)
I resent that.
:P
So you are saying you fit Grant's described criteria then?
-
I can't see the pics. :'( "Bandwidth Exceeded" or some such. :ahhh
-
-
BTW if that still doesn't work for viewing the larger versions, logging into photobucket (if you have an account there) does the job.

-
I'm speechless. These tools look beyond awesome and it's nice to know most everyone will be able to afford one. I can't wait to get ahold of a Wingman
:ahhh -
To me it seems these new tools are to the Juice line what Wave/Charge/Surge tools are to the older-style full-size ones. Perhaps we'll see some parts of the Juice family phased out in the not-so-far future?
-
LM posted some pics and specifications on Facebook. At 3.8" long and 7 oz, I wouldnt describe them as "pocket friendly" (quote from LMs Facebook page). My Juice S2 is about as big and heavy (4.1 oz) as I want to have banging against my leg all day.
-
Just posted this on their FB:
"Are the Wingman & the Sidekick gonna be made with two-hand opening blades for the Danish Market.?
The Kick and Juice are the only legal EDC Leatherman tools here, so I really would like to know now you're retiring the Kick.."Hopefully I'll get an answer..

-
smiller43147,
Thanks for posting the weight, I was curious. I couldn't find that on their FB page, do you have a link?
I'll order a wingman once it's available. I most always have a leatherman on me, usually my PSTII, but outside opening scissors and knife will be great. It seems like a larger version of the S2, but... better. I never found the s2 to be up to any real duty.To anybody who has seen this in person: how large are the scissors, say compared to the S2? Is the blade similar to a freestyle?
Counting down till september...
-
I suppose that is aimed at me, since I'm pretty certain I'm the only one who has seen them in person.
The scissors look to be the same size as on the Juice series, but I didn't put them side by side to tell for sure. The blade didn't seem as nice as the one on the Freestyle, but then these were pre-production models I saw, and the production versions are likely to be a bit better finished than these were, so it's hard to judge at this point.
Def
-
I'm in!
"These are the Fall models coming out in September of 2011."
Fall!? Slits wrists, dies
-
I like them. LM is trying to get the one-handed opening blades on a lower-pricepoint tool, and THAT is an idea full of win.

Wingman: it looks like Leatherman may have developed some decent scissors. I haven't seen a LM w/ decent scissors since the original Wave.
I think the sidekick and wingman look promising for their intended market.
-
@joebw said:
Hi,
the
About the camo Blast shown in the first pictures. The camo is very similar to that used on the camo Blast done for Academy Sports in tlate 2006 or early 2007. However, the camo one in these pictures has the second model locks which came out in 2009.Best - Joe
Thanks for the info Joe.
But I`d like to find out if Leatherman is going to start selling these in the US. There are several sellers in the UK that carry these but dont ship to the US. Since it was in the pic with the new tools I was hoping they were going to be sold here also. -
@smiller43147 said:
LM posted some pics and specifications on Facebook. At 3.8" long and 7 oz, I wouldnt describe them as "pocket friendly" (quote from LMs Facebook page). My Juice S2 is about as big and heavy (4.1 oz) as I want to have banging against my leg all day.The clip is what will make them "pocket friendly, in relation to other LM tools at least. It'll be 1/4" shorter, probably 1/4"-1/3" thinner, and 1.5oz lighter than the clipped Wave that I pocket carry now. I'll need to handle them both side-by-side to decide if the trade-off is enough to get a Wingman, but I'm thinking it might be.
One thing I'm not totally on board with here (besides the weird-o file) is that the lanyard and pocket clip are on opposite ends of the tool. I like that the clip is now plier-end, as that'll prevent the tool from spreading like my Wave occasionally does, but now it'll be harder to have the lanyard sticking out of my pocket to grab. I know they had to do it that way to work with the plier-side-mounted knife and scissors, but I'm all picky :P
-
I've got mixed feelings about these.
- I'm not a fan of combo edges, especially if there is a serrated edge elsewhere on the tool.
- the wood/metal file looks to be far to short.
- that Phillips still doesn't fill me with full 3D confidence
BUT!
- sprung pliers are an excellent feature
- I like having outside accessible tools
- they're so cheap!
OK I know these are only prototypes so there might still be changes. So LM, if you're listening; drop the CE main blade, do something to convince us that the file is worthwhile or bin it and move the flat driver into it's space and make the Phillips fully 3D. OR totally ignore me and do what you like. :D
-
Excellent points all around Gareth!
I agree entirely.Although the combo edge blade and the semi-flat phillips don't bother me as much as that ridiculously short file. ::) Hmmm, it doesn't seem like it would be as objectionable though if it were a diamond grit file.
Diamond files can still be useful even if they are short, but regular toothed files need to have as long a "stroke" as possible. -
@Gareth said:
I've got mixed feelings about these.- I'm not a fan of combo edges, especially if there is a serrated edge elsewhere on the tool.
- the wood/metal file looks to be far to short.
- that Phillips still doesn't fill me with full 3D confidence
BUT!
- sprung pliers are an excellent feature
- I like having outside accessible tools
- they're so cheap!
OK I know these are only prototypes so there might still be changes. So LM, if you're listening; drop the CE main blade, do something to convince us that the file is worthwhile or bin it and move the flat driver into it's space and make the Phillips fully 3D. OR totally ignore me and do what you like. :D
These are not prototypes:)
-
now for the big question, When will it be on the market??
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login