Micarta question
-
Greetings and salutations.
Long time watcher, and I've decided to get around to asking real questions.I've got an idea for doing micarta using some camouflage cloth- probable woodland for the first, but maybe multicam down the road. So my question is, is this even feasible? I know the top layer will have the pattern, but there will be a lot of layers. Is this going to look like poo, or do people think it will actually work?
Also, what recommendations would people make for the epoxy, and are there any tutorials for making and working Micarta, keeping in mind I have access to hand tools, a dremel and a toaster oven (for upcoming Kydex experiments) if it will help. If I can figure out a way to add channels to make Plus-type scales for SAKs (and maybe for small fixed blades), I have a buyer all lined up for a Huntsman with multicam scales.
-
Welcome IronRaven :)
It's doable but I don't know how it will turn out with all those
colours it might just look a mess
There's a how to thread here
Home made Paper Micarta - pic heavy
I have myself a MORA blade which need a handle. Using the remaining resin I used on my SAK scale, I made myself the 1st tail of paper micarta. Try to keep th...
Multitool.Org Forum (multitool.ninja)
I cut mine up on a band saw and belt sander,
A hacksaw, Files, sand paper and a dremel will all work as-well (don't forget your mask)
Don't forget to take some pictures as I'm still learning
-
I was wondering if there was more than that, Sparky. But if not... cool, even I can't screw it up. When you pressed it during the cure, how did you keep the boards you were using from pressure from sticking the laminate though? Although if I can get the grain... hmmm, that might not be a bad idea so I have something to give it a grippyier surface texture.
And alternatively, I'm thinking one layer of camo for the surface, then subdued colors under it for most of the thickness.
-
This is the first time I've made any so I'm no expert :D
I used grease proof paper that you use for cooking but it still stuck to the finished micatahttp://en.wikipedia.org/wiki/Greaseproof_paper
There's another tutorial here

http://www.britishblades.com/forums/content.php?82-Home-grown-micarta-(picture-intensive)
The textured surface thing sounds like a good idea

Oh yea;
This stuff makes everything sticky and gets everywhere so get everything you need ready before you start! ::)
when you tighten the clamps it will run out the edge and drip on stuff in the night
I didn't have any gloves so I used an old paintbrush and still got covered :ahhh -
Ironraven
Hows your project going?
(I only ask so I can post this ;) )My latest go
I used an old HiViz vest and black cotton Tshirt
I used two layers of orange top and bottom, as the orange is thinner than the black I should have use two pieces of orange for every layer :-\
-
@sparky415 said:
This is the first time I've made any so I'm no expert :D
I used grease proof paper that you use for cooking but it still stuck to the finished micatahttp://en.wikipedia.org/wiki/Greaseproof_paper
There's another tutorial here

http://www.britishblades.com/forums/content.php?82-Home-grown-micarta-(picture-intensive)
The textured surface thing sounds like a good idea

Oh yea;
This stuff makes everything sticky and gets everywhere so get everything you need ready before you start! ::)
when you tighten the clamps it will run out the edge and drip on stuff in the night
I didn't have any gloves so I used an old paintbrush and still got covered :ahhhlooking good tony, and that artical on the britishblades forum is cool, love the look of jeans on that knife :o
-
I was really inspired by a guy called warren on that site who makes great knives and handles

He uses all sorts of materials including HiViz vests
-
@sparky415 said:
I was really inspired by a guy called warren on that site who makes great knives and handles
He uses all sorts of materials including HiViz vests
not to sound stupid tony but what is a hiviz vest :D
-
Sorry Mate
When you drive down a motorway, you enter the roadworks and see 6 blokes watching one bloke work....They are all wearing HiViz jackets

-
@sparky415 said:
Sorry Mate
When you drive down a motorway, you enter the roadworks and see 6 blokes watching one bloke work....They are all wearing HiViz jackets
lol stupid me i get it now
infact have 2 in my cupboard, :D -
Its probably my countryside accent (We just call them Hivi's at work) :)
-
@sparky415 said:
Its probably my countryside accent (We just call them Hivi's at work) :):D
-
we call them a pain in the arse at my work
-
Uh... hasn't gotten past the planning stages. I have moved since I asked- it was the availability of workspace with the new place that had me thinking of this. I'm in research right now, which is a fancy way of saying unpacking, finding everything, and waiting for slightly warmer weather- we've had well over a foot since I asked this, to. >:(Although your orange and black is purty. I'm wondering... if you have a region of say two or three layers where it is split in two or more peices along the length of it, so you get something like a red-black-red block pattern, would it degrade the strength too much? Especially if you did something like put spectra or kevlar cord in between each layer. I'm still trying to figure out how to make the camo idea work. Making sure the paper fits would be easy enough- the different pieces together.

-
This is how my O/B micata turned out
(I have something else drying at the min, show you tomorrow)
Its another chunky chap


It actually looks duller in real life but the flash on my camera made it stand out a bit ;)
-
I used all my offcuts of O/B micata to make a little knob for a fero rod
The layers of orange and black didn't line up in this block is that what you meant here
@ironraven said:
Although your orange and black is purty. I'm wondering... if you have a region of say two or three layers where it is split in two or more peices along the length of it, so you get something like a red-black-red block pattern, would it degrade the strength too much? Especially if you did something like put spectra or kevlar cord in between each layer. I'm still trying to figure out how to make the camo idea work. Making sure the paper fits would be easy enough- the different pieces together.

It might go on a diet oneday as its also chunky


-
That fero rod handle looks AWESOME!!!!
-
Thanks Threeme

Its been on a bit of a diet will post a new pic later or tomorrow ;)
-
I think the thinner orange stripes works really well actually

-
Thats better


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login