What Did You Use Your Multitool For Today?
-
I got to use my new BO ST 300 today.
I had to change the lightbulb for the third brakelight on my F150, also one of the license plate lights went out and the Kershaw Skyline and the 300 assisted in that one too.
And in case anyone reads this and is wondering, no, I am not lucky enough to have to replace two bulbs that went out at the same time. I noticed the license plate light was out tonight, but the third brake light has been out for the whole two years that I've had the truck.
By the way, check those lights guys. Just another stupid reason for a police officer to pull you over and give you a $25 fix-it ticket.
-
Except for the rare vehicle, I hardly ever/never see cars that have license plate lights.

-
too lazy to go in the kitchen after i made a sub sandwich, whipped it out first thing 2 seconds later, cut the sandwich in half...
lazyness = owned myself lolnow i have to wash this thing smelly like mustard..
funny story thoe..
-
@Mr. Whippy said:
Used the Charge ALX (along with a 15mm, 19mm and 21mm box end wrenches) to replace the nozzle on our oil fired on demand hot water heater.I've never understood why people need to heat hot water. I prefer cold water heaters, or possibly a luke warm water heater.
:ahhh :P :D
-

;)
-
I used the heavy wire cutters on my TTi to cut down a spring inside my recharchable toothbrush. I had just soldered in a new NIMH rechargeable battery which was slightly longer than the old one. Worked a treat - both the cutters and the replacement battery.

-
@Mr. Whippy said:
Used the Charge ALX (along with a 15mm, 19mm and 21mm box end wrenches) to replace the nozzle on our oil fired on demand hot water heater.
I've never understood why people need to heat hot water. I prefer cold water heaters, or possibly a luke warm water heater.
:ahhh :P :D
:D
The water in my solar powered boiler unit system solution system is usually pretty hot, but still not hot enough. So I also have a hot water heater :) -
@Mr. Whippy said:
Used the Charge ALX (along with a 15mm, 19mm and 21mm box end wrenches) to replace the nozzle on our oil fired on demand hot water heater.
I've never understood why people need to heat hot water. I prefer cold water heaters, or possibly a luke warm water heater.
:ahhh :P :D
:D
The water in my solar powered boiler unit system solution system is usually pretty hot, but still not hot enough. So I also have a hot water heater :)I think those are called tepid water heaters.
:P -
@Mr. Whippy said:
Used the Charge ALX (along with a 15mm, 19mm and 21mm box end wrenches) to replace the nozzle on our oil fired on demand hot water heater.
I've never understood why people need to heat hot water. I prefer cold water heaters, or possibly a luke warm water heater.
:ahhh :P :D
:D
The water in my solar powered boiler unit system solution system is usually pretty hot, but still not hot enough. So I also have a hot water heater :)I think those are called tepid water heaters.
:PI had to look that up :D
"tepid water is not hot, it is not warm, it is slightly less than warm, but not cold...":ahhh :ahhh :ahhh :ahhh
-
[quote author=Mr. Whippy link=topic=12238.msg461830#msg461830 date=1296414578]
Used the Charge ALX (along with a 15mm, 19mm and 21mm box end wrenches) to replace the nozzle on our oil fired on demand hot water heater.I've never understood why people need to heat hot water. I prefer cold water heaters, or possibly a luke warm water heater.
:ahhh :P :D
:D
The water in my solar powered boiler unit system solution system is usually pretty hot, but still not hot enough. So I also have a hot water heater :)I think those are called tepid water heaters.
:PI had to look that up :D
"tepid water is not hot, it is not warm, it is slightly less than warm, but not cold...":ahhh :ahhh :ahhh :ahhh
[/quote]In other words, room temperature?

-
unbeliveable I used mine for protection today
need not tell the incriminating story!! -
Used my Cybertool to take apart and modify my brand new Sennheiser headphones as per this video 555 mod make it a 595 . Went very successfully and I now have clearer less muddy bass response and a slightly more open soundstage. 10 minutes well spent.
-
I wired in a radio into my car lastnight using just a Wave , bit kit and Monarch 300 . Went without a hitch too :D
-
@thebullfrog said:
Used my Cybertool to take apart and modify my brand new Sennheiser headphones as per this video . Went very successfully and I now have clearer less muddy bass response and a slightly more open soundstage. 10 minutes well spent.Thanks for posting that. I might have to pick up a pair of 555's.
-
They are quite nice. My laptop can't really drive them properly, but they sound great regardless. That mod didn't make the bass any stronger like some people claim (though I could very well just be at my sound card's limit, not the headphone's) but the bass responds a bit quicker if that makes any sense, and def. sounded noticeably clearer. Opened up the sound stage a hair too so distant sounds are that little bit further away sounding. Subtle changes, but well worth the trivial time and effort.
-
@thebullfrog said:
They are quite nice. My laptop can't really drive them properly, but they sound great regardless.You should try a Turtle Beach Amigo II (or a Micro II). It's not "audiophile quality", nor is it quite as nice as a dedicated headphone amp, but for the price it's a huge improvement over onboard audio. It' very portable and drives higher impedance loads well.
-
I just used my Paratool to put a new vaccination tag on a dog harness.
-
Used my Cybertool 34 to assemble my new gaming pc :D .
-
-
today i used my classic to open a packet of rich tea cut a new screen protector for my phone package up a knife ive sold open my letters. no big multi tools needed
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
