Charge ALX problem. Or "feature"?
-
Hey all. Been lurking for some time, finally had a reason to post. Unfortunately it's a bad one.
I just got a Charge ALX. Overall I like it better than my (new) Wave. But it has a problem that scares me. The blades don't lock very well. If at all. On my Wave the locking tab travels all the way up to the top of the pivot providing a rather solid lock. On the Charge the tabs barely contact the blades. In fact sometimes you have to wiggle the blade a bit to get the lock to engage at all. When it's engaged it takes almost zero effort to close the blade. Forget the desk spine whack test. I can close it by whacking it on my other hand. Makes me not even want to use the tool.
It's not the only flaw I've found with the tool. The machining on the file is terrible. Almost incomplete. Had a bunch of burs on the end that I filed off with my wave. Also on the handle that doesn't get the pocket clip theres that "filler" peice (if you look you'll know what I'm talking about). It was pretty horribly bent. Again, I was able to fix that. But the lock thing I just can't get past. If I manually force the lock tabs up it locks just as solid as my Wave. It seems like the blades are actually stopping the tabs from moving. On the clip point and serrated blades it looks like the flat area where the lock tab is supposed to rest is actually beveled at slightly preventing the tab from traveling upwards and actually helping to push the tab down and unlock itself. The saw and file lock up a little better, but not much. Not that it's as critical on those.
Now for all the blades to be machined this way, it seems like it would have to be intentional. Anyone else with a Charge (ALX if possible) have the same issues, err features in their blades or did I get a bad example? The date code for reference is 1206 on one handle and 0107 on the other. If it's just the newer design then I'm a bit disappointed but I guess I can deal with it. If it's a fluke it's got to go in to Leatherman I think. Problem is I'm not sure they'd even do anything about it since it "does" lock and technically functions. Just not as well as I'd like. -
If the locks don't work right then send it back. I can speak from experience that the Leatherman customer service dept. is great at repairing and/or replacing defective/broken tools. Give them a call, I bet they'll take care of it for you. Oh and welcome to the forums.

-
I have three ALX models and none have the issues you mention, but then two were rebuilt by hand before I got them.
The Charge is the flagship of the Leatherman line and shouldn't have problems like that.
I have sent this thread off to my contact at Leatherman and I will let you know what the official word is on it as soon as I get a response.
Def
-
Wow. Cool thank's. I didn't want to go straight to LM complaining since I didn't know if it was a problem with my unit, or if it's just a result of some slight redesigning. That's why I wanted to see if somebody could do a comparison for me. Judging by the date codes it seems like it was half made during the holidays when the employees were too distracted to care, then finished after the new years when they were all hungover lol.
-
That's an interesting theory- I wish I had date codes on my car to check the same thing! :D
Def
-
Yeah, me too. Believe me..... but that's another story.
I was just looking at my Wave. The flat areas seem to be beveled the same way. Comparing the 2 I think what's happening on the Charge is that the tabs are dragging on the blades. If I could get the thing apart I could probably just hit the edges of the tabs and the blades with a file to smooth it out a bit. Makes me wonder if they'll grind themselves down a bit and work better with use. Playing with it all morning it does seem as if it's starting to loosen up a wee bit. -
That can happen as well. Keep playing and see if it makes a difference. I have had a few tools that worked better once worn in a little.
Def
-
Man, I really wish I could just get at the edges of the locking tabs with a file.
-
I wouldn't suggest taking it apart- there's lots of parts in there that you can easily lose track of!
Def
-
Yeah, that and getting a bite on those screws is damn near impossible, I mean of course I would never even attempt such a thing......
The more I play with it the more obvious it becomes that the tabs drag realy bad on the blades. If I pull the tabs all the way up like they are on my Wave they stick really bad trying to press them down. Like they are 1/32" too long.
On the plus side, the more time I get in with it the more I like the tool better than the new wave. Feels a lot better in the hand, and the ALX tool loadout will serve me better overall. Though I kinda do miss the scissors, having two drivers is nice and I love the cutting hook. I could give up the second driver for scissors, the hook, and the crimper. But oh well, the dual drivers are convenient. Ahhhh dream tools..... Now back to trying to make my locks wear down. -
I may have gotten it worked out actually. I just kept spine whacking it. It collapsed every time but it finally started passing the test. I think that the harder more abrasive forced collapse of failing the spine whack test abraded enough material off to get it working right. The lock tabs are starting to lock in a bit higher up on the blade and it takes a lot more force to make it fail. Took half the day whacking it against my knee (didn't like the nicks I was putting in my desk) but now I'm a lot happier with the tool. My knee is bruised, but my hand is safe.
-
Welcome to the forum buddy. :)
I am glad your issue seems a bit better now. It is rare to find problems with Leatherman tools but these things can happen with any manufacturer I suppose.
-
Well, we all know that I love Leathermans! But their quality control went way down.. How the files rub with the Charges or the Core tool flip-outs. It just really bugs me how such a great company is not up to speed in quality but there surely are making quanity! I once sent a New Wave back to them and they sent it back without fixing- so I called back and they sent me a prepaid envelope. The same exact thing happned another time with my Surge. But I still do love those Leathermans!
-
Yeah the QC does seem quite a bit lower than my Wave or my old PST II. Nothing huge, but an alarming number of little things. I've never has ANY flaw of any kind with any LM I've had or seen till now. Now I get one (the most expensive one) that has all kinds of nagging little things. I do got to say that the file did rub on my Wave as well. The Charge is the same in that regard. Doesn't bother me since the Wave is the same. I chalk it up to a by-product of the design. I still wouldn't call it a bad tool. As I've already put it through it's paces today doing stupid little crap around the house and it's still a good 'ole Leatherman. But the attention to detail seems to have slipped. That being said I have no doubt that it will serve me well over the next few years just like my Wave did and still does. I just hope that I'll still be able to say that about whatever tool replaces the Charge after those few years.
-
Nope. It's gotta get sent in. I was using it at work today and the serrated blade kept wanting to collapse when using the cutting hook. It never actually did collapse, but I could feel the lock starting to slip. I just don't feel safe using this thing. Ugh. What a pain.
-
Hopefully it will be all sorted soon though. ;)
-
I've personally handled about 15 different Charge tools. Certainly, the liner tab stops in different places along the flat of the blade, but every one has been 100% secure. None have been like you describe Bullfrog.
Definitely send it in. Here is Leatherman's warranty page: http://www.leatherman.com/customer-service/warranty-info/united-states.asp
Bob
-
Since it's a safety isuue with the blades threatening to collapse under load I'm sure they will take care of it. Time to head for the post office! Good luck, I'm sure you will be satisfied with the warranty service. 8)
-
Leatherman warranty is really top notch.. I am sending a New Wave tool out tommorow. I have sent in some pretty nasty tools over the years.. Everyone of them were replaced with refurbished tools..
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



