Hand tools in the US.
-
You could take a look at Kamasa tools.. I got their medium ratchet set and it's a very good quality too.. :)
http://www.kamasatools.com/sv/ -
I have used Kamasa before and they do make good tools, but the price difference is still big compared to the US and Norway.
-
-
I have used Kamasa before and they do make good tools, but the price difference is still big compared to the US and Norway.
I'll shut up then.. ;) :D
No, please don’t . I like your input since you are knowledgeable in the tools department, but it’s just that you can’t compare the price between the US and Norway.
-
For pliers and such , I'm a big fan of Kline tools . Knipex from Germany is also very good .
Chris
-
I don't know if you can get Halfords professional range over there? I think they are around the same level as craftsman (which I have used and like)

http://www.halfords.com/webapp/wcs/stores/servlet/SearchCmd?catalogId=10151&storeId=10001&categoryId=-1&langId=-1&action=listrefine&constraints=ese%7C%7Ci%3A1%3B258%3B%3Bprofessional%3B%3Aprofessional%3B1%2C1%3B%2B0%7C%7Csea%7C%7Cprofessional%7C%7Ctax%7C%7C1%7C%7CCar+Care+%26+Maintenance
(they do some cheap rubbish there aswell)Sorry AHB even though I have some Kamasa I don't think they are in the same league as others mentioned on here >:D
I agree with the others re, snap on, Bahco,Kline, and Knipex

-
@sparky415 said:
Sorry AHB even though I have some Kamasa I don't think they are in the same league as others mentioned on here >:DI mentioned them as being a very good quality too, but I don't recall
comparing them to any of the other brands..
-
Sorry Mate

I feel guilty now :-[
-
I use klein, snap-on, knipex, and some craftsman hand tools at work.
Buying a quality tool maybe higher initially but pays off when you still have it in prime condition 30 years later. I recently became a fan of knipex after buying a pair of dikes from them.
-
@sparky415 said:
Sorry Mate
I feel guilty now :-[Well you certainly should Mister..

All's fine mate.. :D
-
I don't know how you like to work Kenneth
But can I suggest you have some kind of storage/system to keep your tools in so you can see whats missing with just <u>one</u> look, easier than going all through your tools at the end of the day to see whats missing
Another one for the good toolmakers list is Teng for sockets etc (only by reputation I've never played with any)
-
@Pacu said:
I use klein, snap-on, knipex, and some craftsman hand tools at work.Buying a quality tool maybe higher initially but pays off when you still have it in prime condition 30 years later. I recently became a fan of knipex after buying a pair of dikes from them.
Yes, exactly what I mean also. But is the quality in a wrench set from Snap On and Mac worth the 150 or 200 $ more than a wrench set from Craftsman? Craftsman does have a lifetime warranty so if it breaks you will get a new one.
@sparky415 said:
I don't know how you like to work Kenneth
But can I suggest you have some kind of storage/system to keep your tools in so you can see whats missing with just <u>one</u> look, easier than going all through your tools at the end of the day to see whats missing
Another one for the good toolmakers list is Teng for sockets etc (only by reputation I've never played with any)
like having order in my tools and I am very careful to put the tools back after I am done with them and I am going to custom build my own cart at work so as I can have, quoting the German guy at work now, ordnung und kontroll. I really feel amputated at work, have to walk all over the place to find the tools I need and sometimes we don’t have the exact tool for a curtain process so I will have to do it as best as I can with something that roughly will fit.
-
For hand cutting tools, Knipex and Klein. For the day to day use, Craftsman and Proto and Elora are good tools for the price. For high torque applications I own Snap-On and Mac, both live up to the high price tag for that use. I use a six panel tool bag that now weighs 87.7 pounds. To reduce weight I have been using a Metrinch socket set that fits both metric and standard. For moderate duty applications I have been cautiously impressed by this "as seen on TV" set. But, the Metrinch ratchets are ka-ka. I've replaced the ratchets with fine tooth Facom ratchets.
Power tools I like are Metabo, Makita and Dewalt. Measuring equipment I prefer Fluke and Hioki.
-
I've busted a knuckle or two on wrecked half inch Craftsman ratchets. When i took them back to Sears for replacement i got alot of negative attitude from the tool clerks. (2 different occasions at 2 different Sears).
My snap-on ratchets still going...for me the extra price is worth it. I mix and match though..some stuff is better than others in tools. Klein screwdrivers beat all, Knipex cutters are better than craftsman, craftman sockets are the best value, Husky and Kobalt have nice handtools too.
-
@Pacu said:
I've busted a knuckle or two on wrecked half inch Craftsman ratchets. When i took them back to Sears for replacement i got alot of negative attitude from the tool clerks. (2 different occasions at 2 different Sears).My snap-on ratchets still going...for me the extra price is worth it. I mix and match though..some stuff is better than others in tools. Klein screwdrivers beat all, Knipex cutters are better than craftsman, craftman sockets are the best value, Husky and Kobalt have nice handtools too.
For a time period, I had the EXACT same experience at Sears. I stopped buying Craftsman tools for a while. Sears contacted me at one point after I sent a nasty email to them about their "Lifetime" warranty.
I let them have it. I told them that I was buying Husky and Ridgid brand tools for non-critical purposes. I was done with craftsman.
Then, a year and a half ago, I was in Sears replacing broken screwdrivers, I brought a broken socket handle with me, expecting a big hassle.
They didn't have the socket handle in stock,so they replaced it with the smallest socket set with the same handle. Clearly they heard the same from a LOT of former Craftsman owners.
-
at flea markets and garage sales i buy old craftsman sockets and tools..seem better built than what's on the shelves now. Sockets seem thicker heftier back then. I got a good vintage 3/8 collection of deep sockets going. :D
-
I do agree with most on here. I love my snap on tools. The boxed end of the wrenches have a thin wall that gets in tight spots. Crafstman wrenches have a thicker wall and weaker steel. I have bent the steel on opened end wrenches the very first time I used them. I too gave up on crafstman. They are the tools that stay out in the garage while my snap on ect... stay locked inside. I have some mac but the chrome plating chipped off. For a more affordable tool I really like Proto. I think mac tools own them. They have the thin walls like snap on and they are very strong. Two other names worth mention are SK and Matco, both great tools.
-
I'm not sure Craftsman is getting enough love here. I see a few folks commenting on them then moving on to something else. I have been using a lot of Craftsman tools for some time now and I am happy as anything with them. I have screwdrivers, sockets, wrenches etc and I think they are great. I don't think you can beat them. Yes, I agree that Snap On and Mac may be a little bit nicer and higher quality, but I don't think the increase in price is justified by the increase in quality. It's the difference of having a car that does 150mph and one that does 152mph- chances are you'll never have the opportunity to test it at that level, and in the off chance you do, the difference is negligeable.
Plus, there is no hesitation when it comes to replacing Craftsman tools. I got a bunch of broken tools from someone a while back- he saved up all his broken tools to return at once rather than replacing them as they broke, and they were obviously abused. Still, when I walked into Sears and dropped all these second hand, abused tools on the counter, the sales guy ran around picking out replacements, printed off a reciept as a record for the transaction and sent me on my way. It couldn't have been easier.
Def
-
@Grant Lamontagne said:
I'm not sure Craftsman is getting enough love here. I see a few folks commenting on them then moving on to something else. I have been using a lot of Craftsman tools for some time now and I am happy as anything with them. I have screwdrivers, sockets, wrenches etc and I think they are great. I don't think you can beat them. Yes, I agree that Snap On and Mac may be a little bit nicer and higher quality, but I don't think the increase in price is justified by the increase in quality. It's the difference of having a car that does 150mph and one that does 152mph- chances are you'll never have the opportunity to test it at that level, and in the off chance you do, the difference is negligeable.Plus, there is no hesitation when it comes to replacing Craftsman tools. I got a bunch of broken tools from someone a while back- he saved up all his broken tools to return at once rather than replacing them as they broke, and they were obviously abused. Still, when I walked into Sears and dropped all these second hand, abused tools on the counter, the sales guy ran around picking out replacements, printed off a reciept as a record for the transaction and sent me on my way. It couldn't have been easier.
Def
Yes. As I said, in the last year or two, Sears seems to have reversed course and are honoring the Craftsman warranty like they used to.
However, for critical tools (I'm thinking my torque wrenches), The SnapOn's are just better. As in WAY better. (As someone mentioned, the SnapOn sockets and closed ring wrenches are thinner walled and stronger too--but again, for MOST applications, the Craftsman tools are just fine)
-
snap-on ratchets > craftsman ratchets imo


that craftsman is my 3rd one...plastic tab on the back keeps breaking

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login