Maintenance and Restoration Thread
-
@Kender said:
Since I started collecting in November, I have found something that I enjoy. I love getting a dirty or Rusty Leatherman and getting it back into working shape. But I'm still new. I need some pointers and would love to hear some stories or see pics.
My biggest questions:How do you get grit out of hard to reach places?
How do you deal with rust? What about staining and scratches? What can be done?
What's the best way to reshape a slotted screwdriver without power tools?
Those darned knurled screws. Can someone make wrenches for me? :pYou can use a metal file on the screwdrivers and it helps if you have a vice

-
Mainly for dirt I use old tooth brush and toothpick... Or just put my Spirit in dishwasher...
For rust I use AntiRust spray, WD-40 or tooth brush with tooth paste it's a very fine abrassive, or you can try with cloth and some car wax for old and scratched paint it is also fine abrassive...
And don't forget to lube after cleaning, especially after cleaning in water...
Sometimes i use compressed air or oxygen... Yes I know how it reacts with lubricant's, but there are really small amounts of lube on tools and knifes so it is safe (tested) :D
I'll also keep track on this thread, it's a good one!

-
@Dunc said:
To get rid of dirt and grime if you don't take the tool apart then a good wash in hot water and washing up liquid with an old tooth brush or similar , I use a little brush that came with an electric razor .Another method I use to remove dirt is Blue tack http://www.blu-tack.co.uk/ just force it into the gaps and all the dirt and crap sticks to it , also good for cleaning files , saw teath and plier jaws . I use it all the time .I'll need to give the blu-tack trick a go.

-
I'll second that blu tack trick. especially on the files
-
My BO Surge had a little sand incident.
I have no clue how to get it out. Any ideas? -
I often drop my multitools in the sand , because of where I live most of my coat/jacket pockets have a bit of sand in them , i can't get away from the stuff . But I keep my multitools really clean so its not a problem . Just give it a good wash and use a little brush and some liquid soap , rinse , dry with a hair dryer , a bit of WD=40 . Remember the blue tack trick I mentioned above . but use it before adding wd or oil .
-
Just my two cents for what it's worth, which ain't much but oh well:
-
@sparky415 said:
You can use a metal file on the screwdrivers and it helps if you have a vice
I just did, and here's how it turned out on the Kick I just got used:
Before:

And after:

I'd say it looks pretty good.
-
Looks good Kender.
Lots of good advice here so wont repeat it. I use Q-Tips and sometimes Hoppes #9 to help clean the crude out. An added bonus is Hoppes #9 is a wonderful cologne also. :D :D -
@Marlinaholic said:
Just my two cents for what it's worth, which ain't much but oh well:Very good advise Marlinaholic,I've been using most of that stuff on my stainless revolvers for years.

-
Looks good Mate

Mmmm WD40

-
An added bonus is Hoppes #9 is a wonderful cologne also.
You know, I feel the same way about WD-40...
Here's something for you then.
-
@Marlinaholic said:
Just my two cents for what it's worth, which ain't much but oh well:Great video and advice Marlinaholic!

-
@Dunc said:
To get rid of dirt and grime if you don't take the tool apart then a good wash in hot water and washing up liquid with an old tooth brush or similar , I use a little brush that came with an electric razor .Another method I use to remove dirt is Blue tack http://www.blu-tack.co.uk/ just force it into the gaps and all the dirt and crap sticks to it , also good for cleaning files , saw teath and plier jaws . I use it all the time .I was at walmart today and bought Loctite Fun-Tak (i am thinking it is the same as blue-Tack) great stuff i will always keep a package around the house now that i found out about it.
Thanks for the tip.
Mike
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

