Show your slip joint's thread!
-
For a imported Sunfish/Elephant Toe I would recommend Rough Rider. I own many a RR and the overall quality of them is way above their price. That said I don't own any of these particular patterns from Rough Rider so I can't comment on them specifically.
As far as the new Hammer Brand line, these are being made by Taylor Cutlery and I've heard both good and bad and not alot in either direction so I can't say if they would be a good choice currently.
As for the imported Marble's line, I have a few in various patterns. While pretty good quality for the money they ain't quite as good as the Rough Riders in their overall fit. They don't seem to be as consistant in F&F as the Rough Riders, but still a good buy when had in the RR price range.
2xTap
-
@2xTap said:
For a imported Sunfish/Elephant Toe I would recommend Rough Rider. I own many a RR and the overall quality of them is way above their price. That said I don't own any of these particular patterns from Rough Rider so I can't comment on them specifically.As far as the new Hammer Brand line, these are being made by Taylor Cutlery and I've heard both good and bad and not alot in either direction so I can't say if they would be a good choice currently.
As for the imported Marble's line, I have a few in various patterns. While pretty good quality for the money they ain't quite as good as the Rough Riders in their overall fit. They don't seem to be as consistant in F&F as the Rough Riders, but still a good buy when had in the RR price range.
2xTap

-
You learn new things every day!
I have been thinking about colt and marbles slipjoints (some of the colt stag looks good), but I have not yet seen something that I felt I had :D to have from their range. They also appear to be more expensive than RR, at least on ebay. Maybe one of these days...... -
dks,
The newer Colt slippies are more expensive than the Rough Rider line, but if the few I have are any example they are well worth it. I got these a while back from the Colt Brown Stag Bone line and they are flawless in build............


The fit and finish on these two is every bit as good as the best American made slipjoints in my collection.
Now this one below is another Colt, this one from the Samuel Colt Signature Series in Black Stag Bone........

Fit and finish on this is good, on par with your average Rough Rider. It has some blemishes but decent none the less. But not on par with the previous two.
2xTap
-
They seem like they are worth a try. I may have to get one of each stag models to see for myself. if they are as good as you say they are then their price is quite reasonable.

-
dks,
Definitely worth a look, especially if you can find them at more Rough Rider type pricing.
2xTap
-
I have three Chinese-made Buck slip joints: a Stockman, a Muskrat, and a Trapper. The fit and finish on all of them is great! All three of them have seen pretty hard use, especially the Stockman, and have held up VERY well, mch better than I thought they would.
-

G10 Peanut.
Case Sodbusters.



Peanuts. -
Very nice indeed - some of my faves there :D
-
Just added a Sodbuster to the list.. ::)
Nice pics Powernoodle..
-
there very pretty powernoodle, i think i could get into collecting these as at least most are uk legal :D
-
powernoodle,
Nice collection you got going there, you got good taste in slippies!

2xTap
-
Case sodbusters are classics, the larger ones especially feel like tanks. I must get a yellow one, one day. -
Whenever I see a little Butterbean I think "powernoodle" just like whenever I see a big ol' Gunboat I think "2xTap". I dig those Old Timers, too.

-
I wouldn't mind getting one of the carl schliepper sodbusters, they come in backlocking as well as slipjoint varieties and lots of scale variations.
-
Got a couple more the other day to add to the collection. These two being #75 Large Stockman's from Case.
This first one is of very recent production and part of Case's Walnut Bone Silverscript Series......


It's a #75 pattern Large Stockman at 4 1/4" closed and is of 2011 production. It sports polished Tru-Sharp Stainless blades, brass liners and pins, nickle/silver bolsters and Silverscript shield. Scales are Walnut Jigged Bone.....

The knife is virtually flawless sans one small area. Along the backspring area there is a gap about a inch and half long running between the main blade's backspring and spacer....

It affects nothing but is noticeable. Aside from that the blades have zero play, no other gaps anywhere, blade edges are clean and sharp, and backsprings have a good stoutness to them.
Now this next one is a #75 pattern Large Stockman as well, but of much older stock.......


This one is of 2000 production and was part of Case's "Millenium" series. It is a serialized piece and has Case's unique CASE MM shield and tang stamp.......


It is 4 1/4" closed with polished Tru-Sharp stainless blades, brass liners and pins, nickle/silver bolsters and shield, and the scales are done in Jigged Old Red Bone. This is a unused mint piece but came from a collection without any box or paperwork.
The fit and finish is excellent with good stout backsprings, zero blade play throughout, clean even edges that are quite sharp, and a virtually gap free fit. Although there are some very short, tiny gaps between backsprings at both ends of the knife.......

Barely noticeable and don't affect anything. Otherwise a nice and very clean knife that's over a decade old.
2xTap

-
Honestly 2xTap, every time you post I end up looking at buying another traditional slippy. ::) Thanks for sharing mate. :)
-
-
@Gareth said:
Honestly 2xTap, every time you post I end up looking at buying another traditional slippy. ::) Thanks for sharing mate. :)Well, that's a good thing. You can never have too many slippies. ;)
@NutSAK said:
Yeah, I just bought two Queen slipjoints yesterday after looking at this thread. These will be the first I've ever bought. I hope I can control myself!Really, your first Queens! So what did you get......enquiring minds want to know?

2xTap
-
I bought a #40 ACSB Gunstock and a #51 BEM Dogleg Jack.
The pictures you've posted of your #40's had me
In the meantime I saw the #51 for a good price, and I like the clip/pen combo, so I picked that up too. ::) I started out trying to be a good boy and just buy a Queen City #40 delrin/1095 and black wood/1095 copperhead, as these will be users. However, I waited too long and can't find them in stock anywhere now.What I meant above was that these will be the first traditional slipjoints of any make that I've ever bought. I've had a few handed down to me in the past, but I've always carried SAKs. Now that I tend to carry a plier MT most of the time and use a knife mostly just for cutting duties, I'm thinking I'd like a little US-made craftsmanship in my pocket. I'm pretty excited about getting these, but I hope it doesn't turn into a habit. ;) Looking back through all of the pics in this thread, I've already formed a preference for Queen, and I like the company's history.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login