Juice scales
-
Amici,
I also have noticed that the scales on the Juice models will warp, dent, or deform just as soon as they're dropped on a hard surface.Makes me think WHY didn't LM use the same scale materials as they used on the Squirt S4?
For a shorty MT, the S4 does have some pretty tough scales compared to the other Squirt models as well as the Juices.
Cheers,
Serge -
Hey there Serge, what is the "amici" for in all your posts?
-
LOL that's a good question so let me get in Ricky Ricardo mode and try to "splain" myself.
Amici is Italian for "friends" hence why I lead all of my posts with it.. ;)
Now you know, and knowing is half the battle..

Cheers,
Serge -
@sergemaster said:
LOL that's a good question so let me get in Ricky Ricardo mode and try to "splain" myself.Amici is Italian for "friends" hence why I lead all of my posts with it.. ;)
Now you know, and knowing is half the battle..

Cheers,
SergeAhh. That has been driving me crazy for months now. Glad to know now!
-
Hey,
Men, I learned a lot about my juice this weekend. First of all, it don't get near the quality of my Surge! I was, indeed, expecting more quality from it.
The last tool to put in use was the corkscrew (w/ assist). It happens to be a "bit" loose... who I'm kidding? It dances on it's rivet, so the assist keeps getting out of the bottle making the job off removing the cork a real fight to get the wine inside!
Leatherman should really give more thoughts about the juice series. A Few changes would make it a hell of a tool, but as they are now... they're just fine.
Still beign a leatherman (and a new one) it causes some Oh's and ah's and that's what happened to my girlfriend's father. She told him about my new pocketknife, as my cs4 is with me all the time, I showed to him. He got anxious to see all the features it has. I foresee the danger of it... but holded still. When he pulled of the blade i said for the first time "watch that blade, it's very sharp!" (that comming from me, is REALLY an warning). He kept pulling tools and, three other "watch that blade" latter, he slided three fingers all the way of the blade and blood started to drop quickly. The man liked the tool so much, that he KEPT pulling tools while droping blood!!!!!!! (it took me quite a while to wash my cs4 and rinse all that blood away!
I gess I'll have to give him one now...
-

I love your story!
Welcome to MTO

-
We've all sliced ourselves open with these things, but that is a bit excessive! I bet he won't do it again.
Regarding your problem with your juice, I had the same exact problem with my CS4. My scissors were really loose as well, and so were the scales. I was able to fix the scale and scissor issue by peening the rivets a little tighter, but that corkscrew rivet is a blind pull rivet, meaning there is no way to peen it because there is not really anything to buck it. Bummer, but that is the way of all the corkscrew equipped juice's that I have owned.
-
Mr. Mercury,
How did you peened your rivets?
Maybe I cannot fix the corkscrew but a little tighter rivets could subject the scales a bit more for me too. And keep firm the other tools.
Good idea!
-
How did you peened your rivets?
Maybe I cannot fix the corkscrew but a little tighter rivets could subject the scales a bit more for me too. And keep firm the other tools.
Good idea!
First, a little warning about peening rivets. If you have never peened a rivet, be very careful. Unless you have the proper rivet sets, you could irreversibly damage your rivets, then you would have to have either Leatherman or someone on this forum who mods tools fix it.
The way I peen existing tools is simple. If a tool needs adjustment, I place one side (usually the flatter side, it's most likely to be the original head) on an anvil or "bucking bar", then I take the flat of the hammer and lightly tap the rivet, testing the fit between each strike. If you manage to flatten the profile of the rivet too much, then take the ball side of your hammer and round off the head so it matches the rest. Be very careful not to over peen your rivets, because the only way to repair that is to drill them out and install new ones, and as most here can tell you it is not easy to make Juice rivets!
It should be noted that most of my peening experience comes from 1) Aircraft sheetmetal experience, and 2) Swiss army knife repair and modification. I am, by far, NOT the most knowledgeable on the subject, I would advise you ask around and get many more opinions and methods before attempting to peen your own rivets. A few notable experts here include Bob(J-sews), Gareth, and Tom(rotokid from SOSAK). Tom was instrumental in helping me get set up to mod SAKS, Gareth has a tutorial available on the SOSAK site, and Bob is the Juice MASTER! It is highly advisable that you check out what they have to say.
-
Last night, gattering some friends, my sister and her husband to drink some wine etc.
I, once again, used my juice to open the bottles...and suprise!I was wondering how to remove the plastic that wraps the cork without using my blade (glass is a blade blinder), so I thought it would be a good idea to try the notorious juice awl. :-\
It has serrations instead of an edge, which are very similar... no... identical to the serrated small blades in corkscrews, so, it's PERFECT for the job!
Also, once you get that you must subjects firmly the can/bottle opener in the bottles neck in order to pull the cork, it becomes very easy to open the bottle! It really works fine!

I've been founding again and again uses for that awl. Always a little job in which it is the right tool.
It seems that the "dull awl" is not so dull, anyway!
-
Here's a picture of my upward scales. Too much? 'bout right? Give me feedback, please

<img src="http://farm6.static.flickr.com/5056/5557659784_ce8c8c03fb.jpg">

-
Your awl is serrated? That's neat.
-
Well were talking the juice series I have a question. I have the S2 and my handles are no even. One seems bigger then the other. I ask around an was told that's how its suppose to be. Is that correct?
-
@Ashley said:
Well were talking the juice series I have a question. I have the S2 and my handles are no even. One seems bigger then the other. I ask around an was told that's how its suppose to be. Is that correct?Yup, that is correct. :-\ All of the Juice tools have some differences in the handle thickness. The Kf4 handles are about the closest IIRC
while the SC2 must certainly be the worst. ::)- SC2 unequal handle thickness*

The problem of course is the blade/tool selection is never quite the same thickness in both handles. Leatherman would have had to carefully plan out all the Juice model tool load outs, then make sure every combination resulted in a handle stack-up that was identical.

Must be they decided it wasn't worth the bother. :-\
- SC2 unequal handle thickness*
-
That has always bothered me. Dang they should have made them even. :(
-
Maybe this is why they discontinued the KF4- it made all the rest look bad.
-
@NeitherExtreme said:
Maybe this is why they discontinued the KF4- it made all the rest look bad.It's such a no nonsense tool. No corkscrew. No bottle opener. All work/no bottles. After work, you go to a bar or restaurant and pay someone to open the bottle for you.

-
Maybe this is why they discontinued the KF4- it made all the rest look bad.
It's such a no nonsense tool. No corkscrew. No bottle opener. All work/no bottles. After work, you go to a bar or restaurant and pay someone to open the bottle for you.

:D

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login