Slip joint patterns
-
@jzmtl said:
Thanks. Didn't realize it's so complicated, guess I better do some more research.Yeah, it can be. Even within the same make and pattern. Certain handle materials are put on in varying degrees of thickness. This is usually most prominent with Stag due to the natural gnarly surface of them. Few companies will bookend Stag exactly on each knife so two from the same run could be noticable different in thickness. With bone or synthetics not so much.
And certain patterns which will look the same between companies can vary substantially in thickness simply due to how many backsprings they use and their blade stock thickness.
2xTap
-
So generally speaking, for two blades that opposite each other, are they staggered and occupy the same layer as SAK, or separate layers?
-
@jzmtl said:
So generally speaking, for two blades that opposite each other, are they staggered and occupy the same layer as SAK, or separate layers?Well, to answer your question lets take a popular pattern like the Canoe. The fullsize Canoe is usually 3 5/8" to 3 3/4" closed and sports a main Spear Point blade with a shorter secondary Pen Blade. These blades rest on opposite sides of the frame. If you have a Case Canoe it's uses two backsprings, one for each blade.....essentially two layers. If it's a Queen Canoe it uses one backspring and the blades are slightly offset from one another.
So, to answer your question......Yes and yes!
Like I said, it all depends on who is making it and what design they use. And you'll find these variations in many patterns. Some three blade Stockmans will use two backsprings and some three. Some two blade Muskrats will use one backspring or two.
And then you have the Split-Backs. Usually found in Whittlers. This is a old design. Most Whittlers will have a Mainblade on one end, and two secondaries on the other. Not unlike my Case Classic Whittler below........

But instead of having three backsprings, one for each blade, or two backsprings with one of the blades being crinked to fit the Split-Back Whittler uses two backspings that are seperate and split by a wedge shaped spacer, but then taper down to form essentially one. The Secondary blades operate off of their own backsprings but these backsprings merge and the mainblade cams off of both. Giving the frame it's tapered design, like this......

And there is another version of this that operates off of the same principle exept doesn't use the wedge shaped spacer, but still has the tapered frame. My Dogleg Whittlers from Rough Rider are like this. As a example.....

And it's tapered backsprings and frame sans the Split........

Confused yet? ;)
There is alot of variation in the slipjoint world.
2xTap
-
Confused yet? ;)
There is alot of variation in the slipjoint world.
2xTap
Oof, that's definitely a lot to take in for a slipjoint newbie... :ahhh
No biggy, I've been into it for many years now and I still ain't got all the ins and outs of it down pat yet. I'm still learning myself. I get confused all the time! ???
2xTap
-
Well, it's a bit confusing but all very useful info. A lot to learn, but that's half the fun of any hobby :).
-
You just need to buy a LOT of different ones and then you'll be able to compare and contrast ;)
I have a Queen Canoe in that greyish birdeye maple and it's really nice

Personally I think Canoes make nice EDC even though they are a bit chunky. The smallest one I own is a Case Peanut in G10 - you don't even notice it's in your pocket!
-
@nuphoria said:
You just need to buy a LOT of different ones and then you'll be able to compare and contrast ;)That's exactly what I'm doing with my RR order. If I take any heat from my girlfriend, I'll just show her this thread and tell her I'm only doing exactly what others with more experience are telling me to do >:D :D.
-
@jerseydevil said:
...........If I take any heat from my girlfriend, I'll just show her this thread and tell her I'm only doing exactly what others with more experience are telling me to do >:D :D.Good luck with that!

2xTap ;)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login