What Did You Use Your Multitool For Today?
-
Used my Kick to build up a new bed frame for my daughter.
-
Although I had Spirit X and SAK Solo in my pocket, I wanted to give a try to my new combo Squirt P4 and SAK Manager...
Job description - changing a plug on small fan heater, the old one has burnt
Job difficulty - 3/5 - due to melted plastic and bakelite in plug there were bit hard to unscrew
Job succes - job done in aprox 15min, heater working (I don't smell any burning... Yet!! :D )
Used tools:- Squirt P4 - blade, large flat screwdriver, wire cutters
- SAK Manager - blade, flat screwdriver on nail file (one screw was recessed in plastic housing), wire striper on bottle opener
Score:
P4 - 5/5
Manager - 5/5


-
I didn't take pictures, but...
Charge ALX, Squirt ES4 and Vic Farmer used to install the heater and wire up the heated floor in the bathroom remodel.
I'll try to get pics of the bathroom... :-[
-
Not today's work and already posted in another thread, but also posting it here anyway... :D


-
Pics make all the difference to this thread , nice job guys

-
very basic: To get a stuck coin out of a shopping cart lock.
-
Ok,
Today I had to repair the wheelbarrow and needed to use jamnuts to unstick the nut holding the barrow down. Atwood Funnybone FTW

-
today i went to help the doctor at my job it was only for 3 minutes so i didnt take my freestyle with me and i took the minichamp since i use it every 2 minutes:P
any how, one of the chair's screws became lose and it started shaking when ever someone touched it, so the doctor told me that we should fix that the first thing tomorow i said damn i wish i had my leatherman with me, and when i put my hand in my pocket i found the ps4 just lying around i didnt even know it was on me i thought i only carred the minichamp
any how i fliped the chair open the mini pliers fixed the chair then looked at the doctor and he had this expresion on his face like "what the f--k did you just do? :|"
so yet again leatherman is AWESOME -
@kareem said:
today i went to help the doctor at my job it was only for 3 minutes so i didnt take my freestyle with me and i took the minichamp since i use it every 2 minutes:P
any how, one of the chair's screws became lose and it started shaking when ever someone touched it, so the doctor told me that we should fix that the first thing tomorow i said damn i wish i had my leatherman with me, and when i put my hand in my pocket i found the ps4 just lying around i didnt even know it was on me i thought i only carred the minichamp
any how i fliped the chair open the mini pliers fixed the chair then looked at the doctor and he had this expresion on his face like "what the f--k did you just do? :|"
so yet again leatherman is AWESOME"its like heart surgery..... but with a chair." he proclaimed.
-
The wife and I were at a local eatery having breakfast this morning. She was looking at the newspaper ads and saw some coupons she wanted. Normally I would pull out my Buck Vantage pro, but thinking that was to large I remembered my Leatherman Style. So I used the knife (easier than the scissors) and cut her coupons with out drawing the attention of the whole restaurant. +1 Leatherman Style
The only bad thing was the nail nick chipped my finger nail wish it was toward the blade tip more. >:( -
Vic Executive was used to fix a coworkers glasses this morning. Tweezers put the screw back into place then, flat head end of orange peeler screwed it back into place.
-
Not today, but yesterday. No pics, as I was at work and in a huge hurry, plus I had my employees around and needed to keep them motivated.
I was assembling a new fleet of rental bikes for my Resort, (I hate this part of my fleet, they are a pain), and most of the work was just a Hex key and a ratchet set, but the brake cables kept slipping out as we were trying to adjust them, and the little cable end that was "crimped" onto the end kept shooting off like a rocket. I used the crimpers on my ST300 to properly crimp the little buggers back on, probably about 9 of the 15 bikes needed this. I also used the pliers to rip out the staples holding the boxes together and the really awesome serrated blade to cut any and all zip ties on the bikes, as there were many. All in all it was a fun little project and I got to show off my newest addition and get a feel for how it takes work. Despite the weight I always carry the ST300, and it has helped me quite a bit.
-
Used pry tool on SwissTool to unclip the rubber seals around the Toyota's headlights. How exciting

-
today the power went out in the clinic and fortunately there were three electricians but no tools so hup hup came the ps4,freestyle,vic craftsman xD
-
Used the Tinker to fiddle with as I waited for the Doc! Open "click", close "snap" ahhhhh, I love that snap!
-
Used the Tinker to fiddle with as I waited for the Doc! Open "click", close "snap" ahhhhh, I love that snap!
lol, I can relate.
It's SAK relief!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login