What Did You Use Your Multitool For Today?
-
Vic Executive was used to fix a coworkers glasses this morning. Tweezers put the screw back into place then, flat head end of orange peeler screwed it back into place.
-
Not today, but yesterday. No pics, as I was at work and in a huge hurry, plus I had my employees around and needed to keep them motivated.
I was assembling a new fleet of rental bikes for my Resort, (I hate this part of my fleet, they are a pain), and most of the work was just a Hex key and a ratchet set, but the brake cables kept slipping out as we were trying to adjust them, and the little cable end that was "crimped" onto the end kept shooting off like a rocket. I used the crimpers on my ST300 to properly crimp the little buggers back on, probably about 9 of the 15 bikes needed this. I also used the pliers to rip out the staples holding the boxes together and the really awesome serrated blade to cut any and all zip ties on the bikes, as there were many. All in all it was a fun little project and I got to show off my newest addition and get a feel for how it takes work. Despite the weight I always carry the ST300, and it has helped me quite a bit.
-
Used pry tool on SwissTool to unclip the rubber seals around the Toyota's headlights. How exciting

-
today the power went out in the clinic and fortunately there were three electricians but no tools so hup hup came the ps4,freestyle,vic craftsman xD
-
Used the Tinker to fiddle with as I waited for the Doc! Open "click", close "snap" ahhhhh, I love that snap!
-
Used the Tinker to fiddle with as I waited for the Doc! Open "click", close "snap" ahhhhh, I love that snap!
lol, I can relate.
It's SAK relief!
-
Used my Niel special SAK to aid in soldering a new 9volt battery end onto my laser rangefinder I broke. Note to self... Never just pull on the battery to remove it from its connector.
-
I attempted to fix a buzzer actuator in the rear of one of my Buses at work. Turns out we are missing wires so I have to wait for new wiring and a new switch for it. ST300 did a great job of disassembling the panels, stripping wire, and crimping splices.
-
Used my TTi to fix a camera up on a roof, after my stoopid cordless driver packed up. I love my Leatherman.

-
@Griffster said:
Used my TTi to fix a camera up on a roof, after my stoopid cordless driver packed up. I love my Leatherman.And that's the real beauty of MTs. They may never be the best tool for the job but when the right tool fails you've got workable backup.
<hr>
Today I used my SwissTool to hold banana plugs whilst I soldered leads into them.
-
I didn't do it, but Kim used my tinker today to open her stubborn microwave pizza wrapper. Grrrr...it was a tough battle, but she prevailed. Silly girl, she actually asked me as she was wrestling with it, "Don't you have your knife?" LOL!
-
And that's the real beauty of MTs. They may never be the best tool for the job but when the right tool fails you've got workable backup.
[/quote]
Yeah, but now I want a new Lithium cordless drill!! >:D
Bosch GSB 18 V-LI Professional.

-
bosch?
its all about dewalt :P
-
I'm with Sparky, that one would be good enough for my needs.
I have a pair of Bosch domestic NiCad drills, which have lasted me well for well over 10-12 years (can't remember exactly when I bought them). Anyway, it was a hammer drill and a drill/driver with 3 batteries for about £130. The batteries are finally screwed and I can't be bothered with trying to get them going again. Sooooo....... I might go shopping! :ahhh
-
I finally found a use for the hook tool on my SAK Fieldmaster. I used it to reinstall a piece of plastic siding on a house. Just hook it under the lip on the siding and slide it along the edge to "rehook" them.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login