show me your rough riders,
-
@stressmaster5000 said:
Tortoise Whittler - not bad for the money but its not as snappy as I like.
Yellow Whittler - same knife as above with different scales however the blades are nice and snappy.
is the top one a older model with the longer type nail nick ? mine has a very strong snap so will be interesting to see what the peanut is like when it arrives, there is many more RR i wont to get and at these prices even i can afford to collect them, ive been EDC the stockman and find it very usefull and nice to fondle
plus eye catching, and all for under £9
keep em coming guys ,looking good 
-
Did I not post these pics already? I must be having a 'senior moment'. :-[ Anyway I've got an orange bone Whittler and a white bone Canoe.


-
@Gareth said:
Did I not post these pics already? I must be having a 'senior moment'. :-[ Anyway I've got an orange bone Whittler and a white bone Canoe.

not here you havnt gareth
dont worry i work with fok with dementia and im convinced i have it already :ahhhvery nice gareth , i like the canoe and that whittler is on my list already, not sure ive seen that conoe before,
-
Here is a selection of some of the unusual/uncommon (I think…) RR knives I have.
Part 1, Larger knives:
A trapper and a lockback, both fully metallic with engraving on them, they look really nice, especially the trapper, but are also quite heavy for their size.
Their quality is very good, the trapper looks way more expensive than it is.An orange/brown/tobacco bone large linerlock, again this looks beautiful.
This bone colour looks quite nice, and there are a few RR models using it, the colour description depends on the seller.
It feels like it was a slipjoint that was converted to a linerlock, the spring that keeps it open or shut is as strong as on any slipjoint. (think Victorinox locking knives)Deerslayers, really well made, especially when I compare them to some, new, Schrade deerslayers I have. Strangely, even though one of them belongs to the Long Rifle product range, apart from the scales, they are identical; blade, quality, finish. They both feel like they can handle some serious use.
Coke bottle, this feels like a lighter version of the Deerslayer, I bought it mainly to see what these type of scales looked like.
Usually these larger knives go for less than the smaller ones, maybe because they are not very “friendly looking” and/or too big to carry in a pocket.
-
-
Part 2, small knives.
A four blade small stockman. This is too small to actually use (real pain to open), but it does give you 4 sharp blades in a small package.
A small Damascus blade lockback, all metal, would make an unusual alternative to the really small spydercos, for your chain.
Again, heavy for its size, feels solid but, because of the Damascus pattern, it tends to rub on its liners when opening, hopefully this will not remove part of the pattern.A wooden scaled stockman, looks good and has the quality to match its looks, would make an interesting alternative to a plastic scaled stockman.
Finally a wooden scaled linerlock with smooth one hand opening, a thick (3mm) blade (6cm long, 2.1cm wide) and a push button closing mechanism, similar to the one on the Wenger Rangers.
It enables you to close the blade without having to place your fingers in its way, like you would with a standard linerlock. -
very nice, i like the small stockman, is it smaller than say a buck 303 stockman cadet, i like this size for pocket use,
here is some small pouches i made this am, well used one of my wifes old hand bags ::) saves them getting scratched up by loose change in my pocket,

-
-
@dks said:
Good work, now the knives have a home!
I am allways worried about scratching them so I either don't carry them, or try to put them alone in a pocket. Of course once they get a few scratches.......
yeah once roughed up they become real users
but i carry change alot so thought this was a good idea, plus did my bit for recycling 
-
dks,
The Deerslayers (pattern called a "Clasp Knife" by other makers) is a workhorse of a knife. My very first Rough Rider was a Deerslayer in Buffalo Horn. I got it back in 2004 if I remember correctly. I got it to use as a beat around knife, and as a test knife to see how well made the RR's are. It had become my general around-the-house beater blade. I still have it, still use, it's ugly now.........


I've used this thing for just about everything that needs cutting.....slicing boxes, cutting cord/rope, slicing plastic bands, cutting through all kinds of clamshell packaging, wallpaper, plastic ties, carpet, you name it. And it's been thrown about and dropped more times than I can count. It held up well to everything I threw at it. A while back I was cutting/trimming up a carpet remnant. A heavy plush carpet that had a back weave that was thick. It started off well slicing through with little effort but that stuff would dull a blade up pretty quick and when this started to get dull it got a bit tough to cut through. Anyway, I was working through a section of this carpet and was having to pull the knife through.......I was griping the knife real hard when I heard a "POP". And this is what happened........


From gripping that wide frame so hard and pulling that knife through I had slightly crushed the frame liners together, and in the process cracked the Buffalo Horn scales at the pins in a few spots.
Still works like a champ though. After all these years of use and some abuse it does have a little blade play but the backspring is solid, the edge sharpens up to a razor and holds that edge real well. It's scratched and beat up, the bolsters have some corrosion, the handle material is cracked, and the liners are bent in but the knife works just as good as it did when I first got.
This one knife alone proved to me how good a Rough Rider could be. And the Deerslayer makes a real good work knife.
2xTap
-
dks,
I also wanted to add......that Large RR Sodbuster you have that has a linerlock set-up with the backspring, that set-up is quite common and can be found in use on patterns such as Electrician Knives as well as youth style Scout Knives. Even now Great Eastern Cutlery offers runs of their #23 and #73 trapper patterns with both backsprings and an a linerlock. Queen Cutlery does the same with a version of the Teardrop Jack. And Case builds their Mid-Folding Hunter with both a backspring and linerlock, as well as the model which your Rough Rider was designed from as Case has made their Large Sodbuster at times with a linerlock. There have been others made in the past done with this backspring/linerlock combo.
And just a FYI......that small four blade Rough Rider you have with yellow scales that is pictured with that Damascus lockback. That pattern design is actually called a Congress.

2xTap
-
-
-
@Sean said:
2xtap, obviously two people that knife wasn't designed for... you and Schwarzenegger.
LOL........I'd like to think I am that strong!

But it comes down to me using the knife a little harder than I should of and not taking the time to keep the edge honed up sharp as I was working. But it did prove that they are quite durable despite my moderate abuse. And it also proved that their heat treat is decent as the edge held up longer than I thought it would, and it didn't chip or roll on me. And it didn't take much to bring it back to shaving sharp.
2xTap
-
-
-
RRs are fun to modify...


-
-
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
