Red Light
-
That looks like it's worked well mate.

-
I built a detachable red filter/shirt pocket clip/turn on safety for my Photon Freedom Micro (covert edition), which I call a "silencer", using a red PVC sheet from an art supply store ($2) and a BIC pen. It removes as simply as a pen cap does for normal white light.
[The Freedom's variable brightness mode, ramping up from zero, is quite useful so you can use as little light as is necessary to read star charts, additionally important for night vision preservation besides just being red, BTW]

Flipped around for "safety on" mode (precludes "on" button being pressed accidentally in pocket):

Carried in a shirt pocket:

P.S. I never use it as such, but putting it in flashing strobe mode with the red filter attached makes for a good, attention getting, rear bike light, too.
-
I like that, very neat and clever

My one was well received but not been used yet as we are waiting for a 'nice evening' ;)
-
That's an excellent looking mod mzil and very professional looking too.

-
Indeed, that does look very professional. I had to look twice to see where the modification was...
May I ask how you secured the red filter in the pen cap? thx
-
^Thanks guys. It is very simple to make:
-
Cut the top off of a BIC "Round Stick" pen cap like the one shown in the photo, using a sharp single-edged razor blade or similar scalpel like knife. This is the silencer's main body.
-
Gut the remaining pen shaft of its ink tube and ball-point assembly and insert this empty tube into the newly made main body so the front of the two are flush with each other.
-
Using the razor knife, slice off the section that remains outside the main body and discard.
-
Remove this inner, short cylindrical section you just made and slice it into two even shorter cylinders, roughly one being a third and the other being 2/3's. These make up the two red filter retaining pucks which will sandwich the red filter disc between them when re-inserted.
-
Unless you are luckier than me and found a BIC pen with a black main body to begin with, make the two retaining pucks black by coating them on all inner and outer surfaces with a black indelible marker (eg. Sharpie). You don't have to be neat since very little will be exposed anyways. You just want to make the white plastic non reflective.
-
Cut a round disc of the filter material which has a diameter equal to the inner diameter of the main body. It doesn't have to be perfectly round. I used:
http://www.google.com/products/catalog?q=midwest+products+pvc+red+704+03&oe=UTF-8&hl=en&cid=11128150600755133795&os=contents
that I bought locally at an art supply store (as well as a green sheet for further experimentation some day). -
Insert one retaining puck, then the filter disc, and finally the other retaining puck making sure the larger puck section is for the Photon's nose end. I found friction alone held it all together rather well but glue could be used or small wedges of filter material if you want to making the retaining pucks more secure.
Keep in mind this works because the nose of the Photon Freedom Micro covert http://www.google.com/search?q=photon%20freedom%20covert&rls=com.microsoft:en-us:IE-SearchBox&oe=UTF-8&rlz=1I7ASUT_en&um=1&hl=en&ie=UTF-8&tbo=u&tbs=shop:1&source=og&sa=N&tab=if&biw=880&bih=753 is a cylinder with the same size as the inner diameter of the BIC pen tube. Here is the silencer shown removed, for when you want white light:

By painting the inner walls of the "silencer" pucks black with the black marker and recessing the filter disc inside away from the front surface a few millimeters, I've maintained the "covert" status (no side light emitted), important for stealth use and better for astronomy applications as well.
-
-
Well done. I might have to buy a covert just to have some fun with this mod.
Thanks for the great write-up!

-
Mzil, you must be an engineer. I wouldn't have thought up such an elegant solution. Bravo!

-
What an excellent mod. Superb

-
I actually use a green freedom micro when tagging along with my wife (who is the big astronomy buff in our family; she has a 10" dobsonian reflector). I like it a lot better than the red because I get much better depth perception using it than with a red light. With red lights, my eyes tend to focus to infinity when dark adapted and I can't read jack when that happens. With the green light, the improvement in depth perception I get allows me to still read and stay dark adapted. Another advantage of the green ones is that you can substitute a single 2032 in them for the two 2016's they come with, and effectively cut the output of the light in half because of the reduction in voltage from the 32 compared to the 16's. This lets the light go to a lower low and keeps the high from being too high, which it can easily do running 2016's. It took a little while for the other members of the local astronomy club to get used to it, but the green works so much better for me, that I refuse to go stargazing with her without it.
-
red laser should not be best choice, you may lost in the dark when you come across the places where mix the red and the green light together.
-
I haven't played much with using green as an alternate night vision preservation color, but since Photon specifically makes one I also now have made a green filter disc for my silencer attachment mod as well. Since the filter discs are almost paper thin , I keep the alternate one I'm not using in the Photon's battery compartment. This way with a small screwdriver, like I carry on my Leatherman PS4 attached to my keychain, I can open the battery lid and swap colors in the field, at a moments notice, if I desire.
Here is the green filter disc in action (but at full blast for photographic purposes; for night use a dimmed setting would be used) along with the red filter shown left out of its normal battery storage compartment and a spare filter retaining puck prior to being blackened with a black Sharpie pen in the foreground.

-
how about this one, http://www.[url=http://forum.multitool.org]multitool[/url].com/3-in-1-Blue-LED-Torch-Flashlight-Red-Laser-Pointer-Pen_p95649.html
it is does really a cheapie and also fit you want.3 in 1 Blue LED Torch Flashlight Red Laser Pointer Pen with just $1.95,i just came across it recently. -
^ That's an interesting product which coincidentally I have had recent interest in, however for people like the OP and myself who have an interest in reading star charts and looking at things in dark environments while preserving our night vision, a red laser is of no use. We need a large area of light coverage, like a flood light, instead of a focused point, which also can be dimmed to very low levels. Traditionally red is associated with this however I have read reports from reliable sources which seem to indicate that although red works better than white, it is actually not as good as green or turquoise green and the real reason people have been using red all these years is because red light is the color of choice for dark room applications when developing photographic film because of film's relative insensitivity to it compared to other colors in low light and not because of the claimed reason people state regarding human's vision and how rods and cones work.
See, people incorrectly associated the red color used in dimmed darkrooms with what a human would want for astronomy chart reading (while preserving night vision for when you then look through the telescope and need the most dark adapted eyes as possible, to see faint details like in nebulae). Whereas red was selected becuse of film, not humans.
-
Red or pure green get the job done. The reason red is normally chosen for low level night lights is that when map reading contour lines can still be seen.
-
^Thanks Neil. I've heard various claims about:
"You need this color for seeing outlines (contours)"
"You need that color for reading standard newspaper sized text against a white paper background."
"You need this other color if you expect to have some degree of depth perception"
"You need this yet fourth color because although it doesn't preserve night vision sensitivity especially well what it does do is let you return to your fully dark adapted state twice as fast as the other colors."
Unfortunately all of these claims come from various vendors and forum members, none of which I'd exactly call "disinterested and unbiased". What I'd really like to see is the original research to back these various claims. Might you know of any?
[I started a thread on this very topic in the candlepower forums and all it did was ignite a flame war between rival camps (which I had nothing to do with) causing it it get shut down by the mods.] :(
-
Mzil, here is a article you may be interested in: http://stlplaces.com/night_vision_red_myth/
I have no horse in the night adapted race, but my neighbor belongs to the local astronomy club. It's a interesting, ecletic group of people with very strong opinions on night vision and lighting. They use everything from various flashlights to GITD devices, many homemade.
On a side note, my father taught us, when possible, to keep one eye closed for a hour or more, before and after dusk, to maintain a pretty decent level of night vision. Simple and effective.
-
Thanks Tabasco, that was great!

Keeping one eye night adapted is a technique I've used too.
-
That article was correct. I'm a university professor with a PhD in perceptual and cognitive psychology. The idea behind the green light for night vision use is that is closest to the wavelength that the rods are responsive to, so it results in better night vision than a red light.
I can go into much more detail if you like, but I'll leave at that for now unless anyone wants to know more specifically about response characteristics of the rods and cones to different wavelengths and how that influences our perceptions of color and brightness.
-
^ OK, Thanks.
I just had a crazy idea but please hear me out and keep an open mind before dismissing it. This following scenario might not work well for a star party with more than one person but what about for a single person star gazing alone?
Instead of filtering the flashlight's output why not filter the individual eye's input? * Use a pair of, say, swimming goggles with red filtration on one eye for close focusing and map reading purposes and green/blue on the other for maximum* dark adaptation. The goggles are worn throughout the entire time except when viewing through the telescope when the green/blue lens is temporarily lifted for full unfiltered light exposure from the eyepiece. With such goggles the external flashlight one buys would be normal white light, increasing the number of candidates tremendously [plus it works as a normal flashlight when not star gazing]. If one made the red and green/blue filters dark enough, perhaps by adding in neutral density gray as well, one wouldn't even necessarily need to buy a flashlight with dimmed output; the goggles do that job. Again this greatly increases the number of flashlight candidates one could utilize.
[Another variation would be one goggle red (or green) and the other entirely blackened. You lose stereoscopy but the eye kept in the dark is always in optimal dark adaptation mode and fully protected from unexpected light while the other can read, do telescope assembly, etc.
Pros:
-Wearing light dimming eye wear reduces the eyes' dark adaptation time (because you've artificially made your environment even* darker* than "starlight illumination only").
-One light serves both purposes. No need to keep both a red filtered and green filtered one on hand.
-Unexpected car headlights or visiting people with normal flashlights don't ruin your session.
-Special dedicated flashlights with variable dimming may (or may not) be acceptable if the goggles are made dark enough through the inclusion of neutral density filters on top of the color filtration.Cons:
-You look funny. ;)
-From a distance a third party watching you wouldn't realize you were maintaining dark adaptation because from their perspective you would appear to be sitting in the dark but occasionally turning on a normal, garden variety, white flashlight. [well maybe a dim one but not typical "stargazing" dim]ETA: A flipper version for eyeglass wearers might be good. Sort of similar to these (although they should be darker and the blue should be more green) :

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login