Small plier type multi tools
-
Ok i did not know about CKRT. I will check them out.
Spirt is a Vic tool isnt it? Ive never really looked at their pliers
I had a cheap 'Kinchrome' Leatherman type copy i bought in 2001 but i never really used it. its not good quality and at 240g it just feels too heavy for carry. Ideally i want something under 4 inches long too.
Thanks -
@Cyclone82 said:
Ok i did not know about CKRT. I will check them out.Spirt is a Vic tool isnt it? Ive never really looked at their pliers
I had a cheap 'Kinchrome' Leatherman type copy i bought in 2001 but i never really used it. its not good quality and at 240g it just feels too heavy for carry. Ideally i want something under 4 inches long too.
ThanksThe Spirit is a Vic. It is considered one of the best multitools available.
-
Surprising. Leathermans seem more popular
I think ive found what ive been looking for. A LM mini tool. NLA but i hope to find one. No bit driver but its got a decent set of pliers and no extra tools i dont need. Perfect for combining with a SAK deluxe tinker or craftsman etc and i hope it will be better than a LM juice.
Im also considering a SAK cybertool with bit driver. I hate the see thru scales but they can be changed. Just not sure how really strong the bit driver is? Probably only suited to electronics work hey.
-
Ok i did not know about CKRT. I will check them out.
Spirt is a Vic tool isnt it? Ive never really looked at their pliers
I had a cheap 'Kinchrome' Leatherman type copy i bought in 2001 but i never really used it. its not good quality and at 240g it just feels too heavy for carry. Ideally i want something under 4 inches long too.
ThanksThe Spirit is a Vic. It is considered one of the best multitools available.
You can say that again!!

-
@Cyclone82 said:
Surprising. Leathermans seem more popularI would say Leatherman has better world wide marketing! I also recommend a Spirit

-
I might be way off track here but I carry a Swisstech 6 in 1 and find it an awesome little pocket plier. I have given it a pretty hard time and have found it stands upto just about every thing I can throw at it.
Between a small scissor based multi tool and a swisstech you will be surprised what you can get done.
-
A nice small set of pliers is the LM Freestyle. Of course it's just pliers and a OHO knife, but if that's all you need they do it very well. You also have the Skeletool, it's back up to 4" long unfortunately but also very flat and works well in a pocket IMO.
-
I have heard of Swiss Tech before. Where do they originate from? They are not actually a Swiss company are they ???
-
I'd say Skeletool with a bit kit tbh. I find its so light you really don't notice it and the ultra sparse tool arrangement forces you to be clever and adaptive.
-
I second the "Skeletool". It is light and only has the basic tools, no case needed.
-
Well i got 2 LM mini tools comming. Is a PITA as i got to get them shiped via a friend in USA first. Cant wait to get them. I reckon VIC needs to make a LM juice sized tool or a little bigger. Something under 100mm, very strong, good steel and wont break etc. I would buy it for sure, even if it cost $100. Seems no matter what brand you got someone always has complaints although ive very rarely heard bad things about VIC tools though. A lot of people dont like Gerber either. Ive got a Clutch comming and i want to get a Vise too and will see for myslef. Surely these things cant be that bad and have to be better than those cheap no name small multi tools you see on ebay and other places. I havent seen the Skeletool yet.
-
@Cyclone82 said:
Well i got 2 LM mini tools comming. Is a PITA as i got to get them shiped via a friend in USA first. Cant wait to get them. I reckon VIC needs to make a LM juice sized tool or a little bigger. Something under 100mm, very strong, good steel and wont break etc. I would buy it for sure, even if it cost $100. Seems no matter what brand you got someone always has complaints although ive very rarely heard bad things about VIC tools though. A lot of people dont like Gerber either. Ive got a Clutch comming and i want to get a Vise too and will see for myslef. Surely these things cant be that bad and have to be better than those cheap no name small multi tools you see on ebay and other places. I havent seen the Skeletool yet.Absolutely! I would buy that in a heart beat.

-
@Cyclone82 said:
Well i got 2 LM mini tools comming. Is a PITA as i got to get them shiped via a friend in USA first. Cant wait to get them.** I reckon VIC needs to make a LM juice sized tool or a little bigger**. Something under 100mm, very strong, good steel and wont break etc. I would buy it for sure, even if it cost $100. Seems no matter what brand you got someone always has complaints although ive very rarely heard bad things about VIC tools though. A lot of people dont like Gerber either. Ive got a Clutch comming and i want to get a Vise too and will see for myslef. Surely these things cant be that bad and have to be better than those cheap no name small multi tools you see on ebay and other places. I havent seen the Skeletool yet.Not the first time we've heard that cry, and not the last time either I'd guess. It'd be nice wouldn't it. :)
As to your Gerbers, I've only played with the Clutch but IIRC it was OK, not outstanding perhaps, but OK. I was less impressed with the Vice. :-\
-
Well I got my LM Mini Tool. I wont say much here because im writing a full review 8) so you will have to wait for that. I also got the Clutches. They were not terrible but just lack the last finishing touches to make them perfect. Mine have pretty solid pivots, but 2 out of the 3 have plier tips that dont line up well and it that is very very annoying for me. To me it says 'we dont care' and its just sloppy quality control. You dont get stuff like that with Victorinox or at most one in a couple hundred has a fault. You can just buy with confidence. i think i will give Gerber one more go and get a couple more to see if i can get a 'good one' but buyers should not have to buy 3 or 4 of the same multi tools to get one good non faulty one. I want to get LM juice KF4. If the pliers part of the tool is as good as the Mini then i will be impressed, but im still searching for the ideal set of pliers in the LM juice sort of size range. To me its not so much what tools a multi tool has, its the quality, my number one want is 'good quality'. Vic SAK's have got that nailed and from what ive seen of LM first hand they are pretty good too, but there can still be a few duds/faults every so often with those. I really wish some more competitors at the upper end of the market would come along and give some more choice
-
Cyclone I am curious about why you don't like the LM Juice series. I have carried a S2 and a CS4 (not simultaneously) for 8 years and have been very happy with them. In fact when I look for alternatives no other MT meets my criteria.
Not trying to start a Juice v other tool argument here. Just curious about your views on the Juice series.
-
Sorry for the off topic but you make MEAD?? I LOVE YOU MAN!!!!!!
-
I have never said i dont like the juice series as far as i can remember. I havent even tried one. I think the only one I would like is the KF4 which i want to get as the others have corkscrews, but it will have to be pretty damn good to impress me more than the Mini Tool.
How does the KF4 plier head compare size wise to the LM mini? Thicker, thinner, longer, shorter????
The negatives i have heard about the Juice are
feel of the handle
poor can/bottle opener
Poor scissors.I have not heard complaints about misaligned jaws and loose pivots (which are my pet hate) so since the KF4 doesn't have scissors and openers i think i should like it. The feel of the handles im pretty sure would not bother me.
It seems like some of the best multi tools that were ever made (well at least good in my eyes) are discontinued.
-
Sorry about that. I misread your initial post.
Your list of Juice faults surprises me. They do have their faults, but I don't experience those.
The scissors are the tool that I use the most and the Juice scissors have never let me down. I especially like the micro serrations near the tips of the scissor blades. They keep slippery material like fishing line from sliding out as you try to cut it.
The can / bottle opener is useless for opening cans, but I don't use my MT for that anyway. The bottle opener works just fine. I've used Juice to open bottles literally thousands of times.
Feel of the handle is a subjective thing. The Juice feels comfortable in my big hands.
For me, the most significant flaw in the juice series is the flat screwdrivers. They work well once you get the opened, but opening them is difficult and you can end up with a scratch just below your fingernail.
Anyone who wants a KF4 should find one soon. That model has been discontinued. The S2 is the only Juice model left in production that does not have a cork screw. I am considering going back to the S2. My Cs4 is a bulkier than I would like and I rarely use the corkscrew.
-
So you're a fan of mead, ductapehero? I love the stuff, but there is very little commercially made mead available around here, so I make my own. My avatar picture shows a batch the is currently fermenting. It is flavored with locally grown blueberries.
Mead is very easy to make, but you might have a hard time finding honey in Antarctica.
-
@Cyclone82 said:
The negatives i have heard about the Juice arefeel of the handle
poor can/bottle opener
Poor scissors.You forgot blunt useless awl, and a saw that tries to go down the back of it instead of the front, the general half heartedness of design and construction, and those stiff stumpy stabby drivers. That said, you'll not find a better set of pocketable pliers in the size range. If your main requirement is pocket pliers and the other tools are secondary - it's a Juice unless you can cope with the extra weight and space of a Vic Spirit (very little weight difference between a Spirit and a XE6 but HUGE leap in capabilities and quality). If pliers are not the main requirement and more of a "just in case" I'd recommend a SAK paired with a Squirt P4 or PS4. Again, the pliers are very good on the squirt despite their diminutive size, but I had issues with some of the other tools. Me and Leatherman don't have a good track record -great pliers - pity about the rest IMO.
I really wish there were more options - quality options - in this size range. The Gerbers get some very bad press but I found the LM Juice to be the most disappointing multitool I ever bought - more dissapointing than my Gerber Suspension ... and that's going some!!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login