Help - need storage solutions
-
OK, stage 1 of my solution is now complete.
After seeing Jaydar's solutions, I wanted to build something similar on a smaller scale. The reality is with work and family, I have no time for a project of that size right now. So I tried to find another solution that would increase the storage density of my collection (more knives in a smaller area), allow it to expand, and allow me to one day make a nice furniture piece for it. Looking around, I found these Bisley Multidrawer steel cabinets at The Container Store. 10 drawers, each drawer is 14.5" x 9.25" and about 1.75" deep. Nice solid construction and the drawers are fully removable - perfect. These are small and modular enough that I can build them into an armoire or into the regular cabinets I'm putting in my home office. I bought three:

Now, I was very happy to see that the Plano 3701 containers I was using actually fit perfectly in the drawers. That would have been great, but the 3701 only hold 15 knives and wastes a lot of space. 30 drawers x 15 per drawer = 450 total storage, which is unfortunately not enough. I looked and couldn't find any good divider solution that would maximize storage space, so I decided to build my own.
I calculated that each drawer could hold 23 knives total if they were arranged into two rows of 10 horizontally and one row of three vertically. So I cut a LOT of wood and made up 30 of these:

Line the bottom of each section with some felt so the knives don't get scratched, insert into the drawers and fill:
And done. Each drawer can now hold up to 23 knives, so I now can expand to 690 total. I usually organize these by date of manufacture, so having so much more space means I can leave spaces in every drawer to fill as I add items to my collection.
-
That looks great.

-
Now that's a great solution

And nice woodwork, it must have taken an age to make all those dividers!
-
Looks really good. :)
-
Very classy..

-
Very nice!! Now show us a picture of each drawer...

-
That's a very nice design!
-
Thanks for all the comments, guys. So far it's worked out better than I hoped. I even have enough room left to make a special inserts for things like the battle series collection, large (XLT, etc) knives.
@Neil said:
And nice woodwork, it must have taken an age to make all those dividers!It did take a while. Each one has a base, two long pieces, 3 medium, and 12 short: 18 pieces per divider. Times 30 = 540 different pieces of wood to cut and glue together.
@Herman said:
Very nice!! Now show us a picture of each drawer...
That would take forever! Maybe I'll start posting the "drawer of the week" :D
-
Most impressive- I'm guessing you used a jig to hold everything when you glued the trays?
Only change I'd make is space for labels on each one. :D
-
@ironraven said:
Most impressive- I'm guessing you used a jig to hold everything when you glued the trays?I made 4 jigs so I could assemble 4 trays at a time. Real simple - assemble the divider pieces in the jig upside down, glue on the base, flip and clamp. Here's a pic of two dividers clamped after glue up. From the bottom: plywood clamping base, divider tray, jig, divider tray, jig:
@ironraven said:
Only change I'd make is space for labels on each one. :DThere's room - I designed that in. If you're going to be OCD, go all they way

-
Just so everyone knows: I will provide overflow storage for your SAK collection at no charge to you... at my house!

Jazzbass... love your solutions, especially the fact you made it with your own hands.
-
Here is my solution to the problem:
Jewellery trays.


-
Perk of the job? ;)
It does look like a nice solution

-
I got a couple of new additions to my collection and had to rearange my EDC drawer a bit. I used 3 of the kitchen spoon, fork, ... organizers for that, they are stackable so it saves me some space and keeps things neat. The skeletool is cliped to the drawer handle as it is my go to tool for a quick cut or grab.

I'm planing to make a display case/ drawer this summer, but till then this will have to do.
Name 30 tools/flashlights in the drawer and win a cookie.
:D -
Wow some very nice storage solutions.
That's certainly a project I'm going to have to tackle one day if I don't liquidate some knives. -
I store all my knives in their boxes if they have them. I use a Rubbermaid container....handy...and wife-approved. Downside, I can't display them.
I did buy all 4 Case (made in USA) Auburn Univeristy Football 2010 National Championship knives while home in Alabama (and a day before the tornado outbreak I might add). 3 are same serial number, 1 is a higher serial number (the dealer who got them matched as best he could with what Case sent him), and those will be displayed....wife approved.
BTW: I did visit Smokey Mountain Knife Works on the way back to North Carolina from Alabama....guess what: I only bought 1 pair of pants and 2 pairs of shorts by 511. I had 15 minutes before closing, and I just didn't see anything SAK related I needed to buy.....amazing!!!!
-
OK, so when I posted this originally I had about 350 knives, mostly 84/91mm. My solution holds up to 690 total, so at first there were several empty drawers. In one of the empties I threw my small collection of older 58mm knives.
A little reorg this weekend and now there are no more empty drawers. So I'm looking for something for the 58mm stuff. As small as possible, for a modest collection of 20-30 knives. Any one have anything clever?
-
The Container Store has a clear plastic tray with 24 2"x2" spaces that's ideal for storing 58mm knives.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login