Skeletool production differences .
-
Thanks for pursuing this Dunc!
Its always nice to get the whys? answered right from the source.
It's also good to know that the Leatherman engineers are willing to make incremental improvements when needed, not just kick back and relax after a tool hits production. :)So I'm guessing the bigger notch in the washer and the bigger hole for the liner lock detent were both added in 2008 when they did the anti-pinch change to the handles. :)
-
The notch in the blade you're talking about actually helps with sharpening. It's a notch between the ricasso and edge of the blade. On a blade that the sharpened edge goes all the way to the ricasso (unsharpened portion near tang), it is difficult to get the last little bit sharpened, this help in that. I sometimes cut one into knives that don't have one with a triangular file.
-
@SuzukiGS750EZ said:
The notch in the blade you're talking about actually helps with sharpening. It's a notch between the ricasso and edge of the blade. On a blade that the sharpened edge goes all the way to the ricasso (unsharpened portion near tang), it is difficult to get the last little bit sharpened, this help in that. I sometimes cut one into knives that don't have one with a triangular file.Thanks for the info

-
@SuzukiGS750EZ said:
The notch in the blade you're talking about actually helps with sharpening. It's a notch between the ricasso and edge of the blade. On a blade that the sharpened edge goes all the way to the ricasso (unsharpened portion near tang), it is difficult to get the last little bit sharpened, this help in that. I sometimes cut one into knives that don't have one with a triangular file.Another thought on this
I was cutting a sheet of bubble wrap with the blade and I found that the cutout can snag what your cutting and hook up :( I wasn't too impressed as it was only a simple case of cutting a strip off said bubble wrap , I'll see how it goes . -
This is some thing I`ve noticed for some time and not just with the Skeletool. My Skeletool CX new ver. is much wider than my older Skeletool. Like Dunc shows in his opening post. I find it the wider handles are really to wide.
I took my Skeletool CX apart to file it down to get a better fit for my hand. Then I couldn't find my small file and have not found one at the hardware store yet so I put it back together and live with the to wide handles. -
Dunc Thanks for posting pics. I havelooking to buy and have been handling several skeletools, and had almost ruled them out due to the ones that opened wider.(it hurts my hand to try and hold it I guess I have small hands) I even asked about it on the Facebook page where I noticed it between a skeletool, and a freestyle and of course no one but me seemed to know what I was talking about. But I didn't think to get a pic at walmart.
I will say this as well. The store I was looking at had 3 skeletools on clearance. I had wen't and looked a couple of times because once I was wearing a wrist brace, and it partially covered the palm of my hand originally causing me to think that was why the handles felt so wide. But I went back and handled another one ,so they actually turned out to have both sizes in the batch of 3 they had left. These were all PE skeletools.David did it look like it could be filed down and still work properly? other than the "pinching" issue?
I want one but the wider ones are just too wide. I will either have to file/grind one or find one of the narrower gripps, and then there is the warranty issue.
-
@chris777 said:
Dunc Thanks for posting pics. I havelooking to buy and have been handling several skeletools, and had almost ruled them out due to the ones that opened wider.(it hurts my hand to try and hold it I guess I have small hands) I even asked about it on the Facebook page where I noticed it between a skeletool, and a freestyle and of course no one but me seemed to know what I was talking about. But I didn't think to get a pic at walmart.
I will say this as well. The store I was looking at had 3 skeletools on clearance. I had wen't and looked a couple of times because once I was wearing a wrist brace, and it partially covered the palm of my hand originally causing me to think that was why the handles felt so wide. But I went back and handled another one ,so they actually turned out to have both sizes in the batch of 3 they had left. These were all PE skeletools.David did it look like it could be filed down and still work properly? other than the "pinching" issue?
I want one but the wider ones are just too wide. I will either have to file/grind one or find one of the narrower gripps, and then there is the warranty issue.
Chris, while I haven't done a Skeletool yet. There are two main areas You can file. The springs, plier head or both. Just remember not to change angles and dont file to much off. Check often for fit. At this point I`ll probably just live with it as is. The Skeletool can be a challenge to get back together. :)
-
If you do take a file to it remember you will void your warranty .
-
I have to get one first.
I got a new version of the wave under warranty and have been trying to get used to the wider opening compared to my original version.
Meanwhile I have been hoping to score a skeletool on clearance or used.
I almost got an old PE with im assuming the narrower opening handles at wallyworld, on clearance for $45, but I really want the cx PE, which will either have to live with or file down, (plus i was hoping they would cut the price again, but they ended up selling first.
Mayby I can get a pair on the boad.
Ive been carrying the wave since I can now add the pocket clip. and its nice but I still want a skele to see if it would do the job.
-
Another reason why I love Leatherman...
:D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login