Screwdriver width
-
@Sazabi said:
Neil: Wasn't there a year between the new magnifier and shorter Phillips, though? I seem to recall there being examples of the new magnifier with old Phillips on factory knives.Pretty certain that never happened. I've certainly not seen one and it would mean them having made two different tools only a year apart.
-
One could always try to use a second Phillips machined into a narrow straight screwdriver like on the technician. Today I really needed a powerful magnet, might be a tool idea in that, but it likely would not be used too often and might be problematic.
-
Well, i possibly may have thought of something. Not so much as what tool to use but how to use a thinner tool and not have shims, but the more i look at it the harder it would be. Would require custom milling of new liners and stuff, which i could get done in USA but its kind of a bit mich to do just for a pocket knife and im still not sure where things would actuall sit. Basically i would start with a farmer and would like to add a screw driver layer in the middle, would probably have to be between can opener layer and saw so even if i had a phillips and a small blade in there, i would still hav eto be able to grab the tool out.
Machining a second phillips to a technicians screwdriver is a very good idea. How exactly do you do this? will it muck up the heat treating?
-
Neil: Wasn't there a year between the new magnifier and shorter Phillips, though? I seem to recall there being examples of the new magnifier with old Phillips on factory knives.
Pretty certain that never happened. I've certainly not seen one and it would mean them having made two different tools only a year apart.
Maybe it was something I dreamed.

[Edit: According to SAAM's 91mm Tools Evolution, the new magnifier came in 2004 and the new Phillips in 2002; I had the tools flipped.]
-
So apart from width issues, can anyone tell me if the inline Phillps will fit with the inline 91 or 93mm technicians screwdriver or are both tools too long for the same layer? Everytime i try and tell my self to forget it i just cant resist the temtation to have an inline phillips in a 93mm alox.
-
I'd say good luck finding one first. The inline small flat screwdriver is found on a limited number of models all of which are considered collectors items :)
I don't own an Technician or Technician plus to have a look but I'd put good money on it being too long. Also keep in mind its only going to be as wide as the electrician/pruning blade so you'd still have to add washers or the like.
-
Well its going to come down to the fine screwdriver, pruner or electrician blade i think. Im not sure if the pruner and electrician blades on the master gardener and master electrician 91mm's are different to to the 93mm blades? The technician screw driver is in same layer as bottole opener so i think it would probably fit with inline phillips as ive seen the inline phillips on a cadet in place of the can opener. After studing some more knives i know i can do it now. Different widths wont be an issue. If you look at a Vic soldier, you can see they use spacers on the reamer and the key ring on the farmer are done the same way. So i can do spacers like that and it will still look professional and factory. I was considering making new liners with the spacers built onto them and machined from one bit of alloy but thats a bit of a big job that i would need to get specially done and is just a 'hassle'. It was only tonight that i saw that the soldier has a shim on the side of the reamer and the keyring tab is done using the same principle on the farmer, so if its good enough for the factory to do it that way its good enough for me. Like you i wasnt keen on just sticking round washers in there, but if i made the spacers like they have on the soldiers and have them match the curve of the liners then it should all look good. Now i just got to make some decisions on the tools and then find them and then im ready for my first mod!
-
Well the very best of luck to you, whichever option you go for.
Just make sure there are lots of nice pictures when you're done :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login