Small knife rust resistance experiment
-
@50ft-trad said:
I'm not too well up on the science aspects of it (there's probably folks wetting themselves at my daftness already :D) but I have sometimes wondered why sacrificial anodes of sorts haven't reared up more in the knife and tool arena
Without water you don't have a complete electric path for the sacrificial anode to work. There are some people selling similar stuff for cars as well, but I've seen no proof it actually works.
But without water (even just humidity) you wouldn't get corrosion in the first place

So ... if the knife/tool was capable of conducting electricity ... and the right anode was used ...
(Not trying to correct you - just get my head round it) -
Wow. That's a real eye opener! Never expected that kind of rust to show so quickly, especially totally submerged without exposure to air. Wonder though if those spots are where air was trapped as surface bubbles or something.
-
Yes, when I had a close look before taking the photo I do believe the spots are where air bubbles were. Also worth noting that the plain tap water blade also had air bubbles on it. I will post up more say in the weekend.
On the vegemite question, without wanting this topic to go off topic, yes, a little like marmite, but being vegemite is Australian and marmite is New Zealand (slightly different ingredients to UK marmite), I'd have to say marmite is better (Im sure Aussies will understand my Kiwi logic here)...maybe that is why I am sacrificing these containers ;)
-
Thanks for the info. Very interesting reading.

-
So.... Which is more corrosive, sea water or vegemite? :D
-
Excellent question :D
-
I would guess sea water, since (from what I've heard) vegemite sucks the oxygen out of everything around it.
-
So about a week in things were looking ugly for sea water blade:


However fresh water blade is happy as larry just sitting in fresh water shining:

I decided to change out the mucky salt water for some 'fresh' salt water and to suspend the blades partially out next. As in the salt water photo, you can see a lot of the rust substance is like a fine growth coming off the blade. Once I wiped this off I was left with the three main rust spots. I gave this a fairly strong rub with a hard material cloth and almost returned the blade to its former glory!

and then suspended the blades half in/out of the water.

Will revisit again in a half weekish... -
After you think you have completed the test, can you take the blade in fresh water and try it in the salt water so we can see if it starts to rust in the same amount of time as the first one you had in salt water.
-
Good idea and will do. Will probably look at the current configuration for say a week and then do that.
-
I just want to see if another blade will rust as quick in the same way so we have a little bit more to go by than just the one blade in salt water.
-
On the first picture, one blade seems more scratched than the other. Could this be a factor?

-
I agree more than one needs to be tried.
Also with the scratches it could be a factor, however the rush spots were in different areas...?
A the moment I cant even see the scratches!?Edit: Now I look, the blade with the scratches is the fresh water blade. the salt water one was the better of the two.
-
So a week on, no surprises, the salt blade has rusted more. What is interesting to point out based on earlier discussions is that it has rusted much more in the totally submerged areas than the point which was at the water/air level:


What is great to see is that after two weeks now, the fresh water blade is as good as if I had just left it out of the water. Noting also it is the more scratched blade.

So for the next week, I have again placed 'fresh' salt water in, kept the rusting blade as it was and dropped the fresh water blade in the bottom.We should see rust forming on it by next week in theory...

-
Loving the experiment Hawkeye.

-
Cheers.
Didnt get home with the sunlight today so will hold off until the weekend to show latest developments... -
So, a week has gone by with both blades in the salt water. The results are not quite as I expected...
The long term salt blade increased in rust a bit:

However, the one that used to be in the fresh water:

Its still perfect! - not a sign of rust at all.
Interesting.
Now I cant be sure which is from what, but if you look at the nail nick's, they are different sizes, suggesting different ages of the swiss knives they came from. I can confirm 100% one is from a Tinker and the other 99% from an non hook Climber (with older corkscrew).Perhaps age, or stainless used at the time has caused one to rust and the other not to...thoughts?
So, no content bringing the mountain to moses, I decided to take moses (the blades) to the mountain (the sea). This is either the next stage of the rust test, or, a fairwell to the brave blades of science:

I chose a place you can only access at low tide, but who knows, a scavenger may find them and take them.

So...its either an update next week, or... -
Love those photos by the water.

Looking forward to the update.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
