Show your slip joint's thread!
-
NutSAK,
Ohhhhhh yeah.......very nice!
I was wondering which you'd get. Nice choice in the NF Mink Moose. Some gorgeous Stag on there too. I ain't got any of the #66 patterns yet, how's the backsprings on these? Also, how's the edges on that one? I heard recently that GEC has improved the factory edges on their newer releases and that they come fairly sharp now.And yes, you can send that Commission Check straight to me. That would be good! :D
2xTap ;)
-
That is a fine looking jewel NutSak.

-
That gec is lovely tony, i love the look of long pulls

-
Evidently the #66 has lighter springs than the larger patterns. Everyone mentions those "bear trap" springs that GECs have, but these aren't that strong. The snap is good, but honestly I'm a little bit disappointed that it doesn't "clack" shut. It wouldn't keep me from buying another though, and that new Calf Roper looks like a perfect EDC.
The edges were good out of the tube, but there was a burr on both blades. A few quick swipes with a fine stone had her shavin'. It had much better factory edges than any Queen I've handled.
What's the deal 2xTap? I think this is the first knife I've posted that you didn't ask about F&F. I guess you figured that there was no point in asking, and you would be right about that. ;) My oh my do they build these right! I have a serious problem now--I don't know which one to get next! It'll probably be a #73, maybe even a stainless one with an acorn shield. ;) :D
-
NutSAK,
Well, GEC does make strong springs. Most of the larger patterns are stout, and noticably so. But it is really only the #23 and #73 patterns that usually come with the nail-breaker level of springs. This is due in part because of the strongs springs added with blades that have squared up tangs.....this combo can make it feel like you are opening a bear trap. I was just curious how their springs are on this new pattern.
Sounds as though they have improved the edges somewhat if it took just a few swipes to get it shaving sharp, this is good.
Yeah, I wasn't even going to bother to ask how the F&F was. I already know. Since 2006 when the first GEC's were released I can count on one hand the number of times I've heard mentioned on any forum anyone that had a complaint about a GEC's fit and finish (two times that I can recall!). A lemon from GEC is a rare bird indeed. Matter of fact, considering how well put together their knives are, and how few are actually made in each run......I wouldn't be surprised if a GEC that leaves their factory with a F&F issue would become a hot collectable!!!!
Picking your next GEC is always a problem. Aside from a few times, I myself have that problem nearly everytime I look for my next.
As to steels, this is just a FYI.........the Northfield and Tidioute brands are always done in 1095 carbon steel. The GEC brand always comes with a Acorn shield and the main steel in this line is 440-C stainless but not all GEC brand come in this stainless. There was some early stuff done in 420HC and currently their is a line of GEC fixed blades with Acorn shields that resemble their Pioneer and Scout patterns and even have #23 and #73 pattern numbers......but these are done in 1095! Don't ask me why they did this, no one seems to know. But they are in fact GEC brand in carbon steel.
Great Eastern has also made alot of their pattern under other names on contract. Some of these are Bradford Cutlery, Good Old Days Cutlery, Cripple Creek, Tuna Valley, Bulldog USA, Schrade Cutlery, Ulster, and a few others. And all of these have come in a mix of steels.
Good luck on your next choice. I myself have been eyeing quite a few and have been meaning to get some every pay day, but I keep getting other "deals" thrown my way which has prevented me from expanding my GEC collection......(two more Robesons on their way to me as I type this, both in Stag!) ;)
2xTap
-
Ohhhhhh yeah.......very nice!
I was wondering which you'd get. Nice choice in the NF Mink Moose. Some gorgeous Stag on there too. I ain't got any of the #66 patterns yet, how's the backsprings on these? Also, how's the edges on that one? I heard recently that GEC has improved the factory edges on their newer releases and that they come fairly sharp now.And yes, you can send that Commission Check straight to me. That would be good! :D
2xTap ;)
hi terry, did it come with the pouch as really like that

-
Paul, the pocket slip came from knivesshipfree.com. It is very well made, and I highly recommend it. Seems like everyone who tries one recommends it.
-
@NutSAK said:
Paul, the pocket slip came from knivesshipfree.com. It is very well made, and I highly recommend it. Seems like everyone who tries one recommends it.cheers terry ill go and check them out,

-
Paul, the pocket slip came from knivesshipfree.com. It is very well made, and I highly recommend it. Seems like everyone who tries one recommends it.
cheers terry ill go and check them out,

I highly recommend them as well. I have a couple of them.........

.......and since getting these my Gunboat isn't carried any other way. They are very high quality, made by Sharpshooter Sheath Systems (same maker of all the fine leather for Bark River Knives). Top notch pocket sheaths if there ever was any.
2xTap
-
Paul, the pocket slip came from knivesshipfree.com. It is very well made, and I highly recommend it. Seems like everyone who tries one recommends it.
cheers terry ill go and check them out,

I highly recommend them as well. I have a couple of them.........

.......and since getting these my Gunboat isn't carried any other way. They are very high quality, made by Sharpshooter Sheath Systems (same maker of all the fine leather for Bark River Knives). Top notch pocket sheaths if there ever was any.
2xTap
they look more expenive than they are, i will get one when i can

-
I have a KSF slip case too and it's very handy. Started off fairly rigid but has got nice and soft with use now.
-
@nuphoria said:
I have a KSF slip case too and it's very handy. Started off fairly rigid but has got nice and soft with use now.i did make some pouches but had issues with material coming off inside and getting bits on the knives, i like the look of these ones as like to put my knife in a pouch due too loose change scratching them up,
-
I have a pocket sheath that was gifted to me from a member on another forum. He made it out of a gray sock. It works wonderful.

-
These are my first GEC's, a Tidioute Congress & a Northfield Whittler, both with forged 1095 carbon steel blades.
Until recently i'd never even heard of the brand, but after reading all the good impressions they seem to make on various forums i wanted to own a few to see for myself.
Both are indeed very well made, and although i'm not ready yet to lay down my Spyderco's, Striders or Microtech's, i'm quite certain the day will come that one of these will go into my pocket as well.


















-
kwakster,
Beautiful knives, and a great choice in that Whittler. Good looking bone on that one. Great Eastern has really upped the ante when it comes to production slippies.
Be careful though, they have been known to cause addiction! :D
2xTap
-
Very nice GECs kwakster! That whittler is awesome, and that models seems to be fairly hard to find these days. How do you like the size of that pattern?
-
These GEC knives, especially the jigged bone one, look quite classy, it shows what a fresh company can do in a very short time, they appear top quality and still have (slightly) reasonable prices. I don’t have any, but.....

Here are some more products from another fresh and significantly cheaper, company that I got today.
These were bought to try these patterns and see the scale designs.A muskrat RR683, with green synthstone scales, which to me feel just like plastic.
Looks good, some slight finish problems (a small amount of filler was used to patch up one of the scales) and interesting file work on the springs. Also the “snap” of one of the blades needs improving; I hope some cleaning will help.A Bowie series Copperhead, RR949, sawcut bone design, appears fine and was, as expected, the most expensive of the lot (we are talking Rough Rider expensive here..). Very nice shield too.
Finally a midnight swirl whittler RR963, the interesting thing about it being that the larger and significantly thicker, blade utilises both the springs of the two smaller blades, giving it a distinct tapering as you go from the two blades side towards the single blade (from the spring side).
As I said, I had none of these patterns or scale designs before so I am quite happy to have them now.
-
very nice ashley,

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login