IT LIVES 'Pocket Survival Tool'
-
Nice work getting her back in business Dr. Mat!
:D Did you have any trouble getting her apart? Seems like the heads on those early knurled screws are mighty thin, and don't offer much "meat" to get ahold of :-\ -
Yep Bob when I had a close look at the fastener I thought it looked more tricky than normal :o :o.
So I did heat the fastener to loosen the Loctite(I do not normally bother) & used one of my dodgy multimat moded sockets & a LM Crunch , worked a charm :D :D. I did swap out the original fastener & used the donor PST's fastener when I reassembled it :D. -
What tool do you use the undo those special scews? If anyone knows the spec of the teeth i could get a proper tool made for them or is there a tool out there already? I was of the understanding its a proprietry fitting.
-
Good resurrection MM..
Now we just need to see the family shot of all your PSTs buddy.. 
(Yours too Bob..
;)) -
I used some cheap sockets & made a imprint on them, here is the link ----> /post/130516
I used one of my sockets to undo the fastener & a LM Crunch to hold the other end of the fastener, otherwise the fastener just spins & does not undo. I need to make another socket so I do not have to use my Crunch.I think Bob/J-sews & Def got some made & it was a epic nightmare + EXPENSIVE
.
The best dismantling tools are the ones the factory uses & issues to authorised Leatherman repairers. VERY hard to come by though :( :(You are right Allan I do :ahhh :ahhh :D
-
@Cyclone82 said:
What tool do you use the undo those special scews?Here's a few threads about the LM tools.. :)
Leatherman maintenance tools ?
Tools for Leatherman Tools
Free LM Repairs, Cleanings and Mods! -
Nice work Mat
-
Multimat, what sockets do you use? you made them? bought them?
-
@Cyclone82 said:
Multimat, what sockets do you use? you made them? bought them?In the link I posted it explains what I did /post/130516 , I used CHEAP sockets they are soft enough to take a imprint good quality sockets are too hard. It can be a little hit & miss process though.
-
Thanks. I will read that link. I already do have a set of cheapy sockets like that which are not my good ones for work ofcourse ;)
-
@Cyclone82 said:
Thanks. I will read that link. I already do have a set of cheapy sockets like that which are not my good ones for work ofcourse ;)The cheaper the better for this mod I suspect

Hmmm, too bad they don't make hex sockets out of soft aluminum...
:D -
Looks good Mat.
:D -
I ended up loosing one of the pst's I, recently aquired to the waranty "upgrade" to a blast. The one I kept is is excelet shape other than the plier cutters. But I have a new appreciation for the original after finally owing one. I Do like the older hand profile better as it is almost exactly the same as my original wave. If mine had not been so worn I might have tried repair but the pliers, file, and mini screwdriver were very worn, not to mention the half a knife, blade. The blast is kind of cool, but its a brick in comparison.
-
Awesome looking early PST mat!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
