What Did You Use Your Multitool For Today?
-
SwissTool
Few days ago I've stripped some wires, reassembled lamp, connected them lamp socket, assembled lamp and screw it uned kitchen cabinet...
Woila wife!!
And now she complaints, and want another lamp like that on the other side of cabinet...
Last night SwissTool did some job again...
Door handle got loosen and stayed in my hand while closing the door, small screw which holds it togeter got loosen, so I tight him up and while dooing that I've noticed few more loosen screws, so ST fixed that too...
Did I mentioned that ST is my favorite allrounder?!? Just like how hefty it feels in hand, and how capable it is! Awesom tool IMHO!

-
Few days ago I've stripped some wires, reassembled lamp, connected them lamp socket, assembled lamp and screw it uned kitchen cabinet...
Woila wife!!
And now she complaints, and want another lamp like that on the other side of cabinet...
Last night SwissTool did some job again...
Door handle got loosen and stayed in my hand while closing the door, small screw which holds it togeter got loosen, so I tight him up and while dooing that I've noticed few more loosen screws, so ST fixed that too...
Did I mentioned that ST is my favorite allrounder?!? Just like how hefty it feels in hand, and how capable it is! Awesom tool IMHO!

my lamp went out and i pulled out the soldering iron and fixed it.......... BUT now the goose neck won't stay tight.
I'll try some super glue.maybe I should just get a new lamp. LOL
(btw used the s2)
-
Yesterday when hooking up my trailer noticed one of the contact pins had come loose
.
I had the MUT in the car but the small electric screw would be too small for the MUT
.
Nup took the smaller of the 3 MUT bits out & used it out of the tool , worked a charm 8) 8).
Used the MUT's hammer to whack in our chicken run's supporting stakes 8) 8). Hammer on a MT 8) 8) 8) :D -
Used the Explorer Plus to sharpen my pencil today in between classes. I know I've done that before, but I really like doing it. It's relaxing for a few moments anyway. :)
-
Used my old faithful battered 30 year old SAK to try & fix the vacum cleaaner.The philips head for most of the screws until I couldn't reach the deeper screws.Then the flat part pfthe bottle opener to leaver the casing apart.All to no avail after years of loyal service the vacum cleaner had expired.Steve
-
My old Huntsman became very handy opening beer/wine bottles today at a very nice easter dinner with
guests and family..
-
I used my new swisschamp to open the package containing my new spirit!
-
Used a SOG PowerLock to tighten up some phillips head screws at work. :D
-
-
I used the phillips head screwdriver (well really its just a pointy thing ;) ) on my LM squirt PS4 to pop off and re-fit the letter 'C' key button on my computer keyboard which came loose.
-
I fixed a deer feeder with my PSTII
-
I use the beer bottle opener of my Micra to open 6 bottles of beer.
-
I used the awl on my spirit today to ream a hole in a tire so I could patch it. Worked perfectly! The serrated blade made simple work of cutting the plugs to length as well.
-
Dat before yesterday I used my SwissChamp to begin building a new cabinet/book shelf. My GF then used my Cybertool to finish the job after I left for a job interview (God I love her), then yesterday I used the Cybertool to build my new computer. No use today as I was at my new job. It's been a damn good couple days :)
-
I made the mistake of wearing a new set of shoes to work a booth at an industry show, so I used the scissors on my Juice to cut some mole skin to size.
-
Tenacious and SwissGrip had some serious job today... Went BBQ, so Tenacious was in charge of meat, bread, onion... And for SG there was crucial job for bottle opener!!! :D :D

-
I used my camo leatherman charge to put in screws to hold up the new curtains and rods.

-
I put my spirit to use doing a very common task, pulling fuses from one of my fleet vehicles. It's a custom open air Tram with trailer that seats 20. The trailer has lights so it's street legal, but the way it's wired makes it very easy to wear away the insulation on the harness, so we have a weekly short that blows a fuse and kills the whole Tram in the middle of the smurfing road with a half a smurfing load of guests in their smurfing bathing suits that want my smurfing head! I made a code 3 run to the local hardware store and picked up some fuses to get it going again. My driver was very patient and kept most our guests laughing about it, but it still doesn't look good. Just one more reason I can justify wearing a Multi on my belt when I'm in dress slacks and polished shoes.
-
Used the awl on my Farmer to take a chunk out of my right thumb! :'(
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
