Small plier type multi tools
-
@Cyclone82 said:
The negatives i have heard about the Juice arefeel of the handle
poor can/bottle opener
Poor scissors.You forgot blunt useless awl, and a saw that tries to go down the back of it instead of the front, the general half heartedness of design and construction, and those stiff stumpy stabby drivers. That said, you'll not find a better set of pocketable pliers in the size range. If your main requirement is pocket pliers and the other tools are secondary - it's a Juice unless you can cope with the extra weight and space of a Vic Spirit (very little weight difference between a Spirit and a XE6 but HUGE leap in capabilities and quality). If pliers are not the main requirement and more of a "just in case" I'd recommend a SAK paired with a Squirt P4 or PS4. Again, the pliers are very good on the squirt despite their diminutive size, but I had issues with some of the other tools. Me and Leatherman don't have a good track record -great pliers - pity about the rest IMO.
I really wish there were more options - quality options - in this size range. The Gerbers get some very bad press but I found the LM Juice to be the most disappointing multitool I ever bought - more dissapointing than my Gerber Suspension ... and that's going some!!
-
Your list of Juice faults surprises me. They do have their faults, but I don't experience those.
They are not my faults i have seen, just what others have said on here. Yes i forgot the blunt awl too. I still really want to get a KF4 but they seem all gone now.
I really wish there were more options - quality options - in this size range
100% with you there! I looked at the SOG range tonight and they have nothing in the under 100mm folded size range either. I hope some manufacturers are reading this but i doubt it. I dont know where they get their market research from.
I think the juice range needs updating or just add another line or preferably more manufacturers to come out with something similar. Can you imagine how awesome a smaller Vic swiss tool would be!
-
**RE: JUICE SCISSORS
**
I have a Juice CS4 and and I also have Vics. Juice scissors are fitted poorly: there is too much side-to-side play in the scissors (floppy). Compare the juice scissors to Vic scissors and you'll realize how much of a piece of crap the Juice's scissors are.That said, I like the Juice, but I'll pair it up with a SAK with scissors.
-
A quick note on scissors. Many scissors have a "set" to them, in other words the blades gently curve in towards each other. So the wiggle you feel is supposed to be there, not poorly made, just designed that way. BTW Vic's are just the same but being shorter the 'set' is less obvious. Now if they don't cut that's a different story but both of my Juices' scissors cut just fine.
However the limp, soft backspring is a different story all together, I'm properly disappointed in that. :-\
-
*A quick note on scissors. Many scissors have a "set" to them, in other words the blades gently curve in towards each other. So the wiggle you feel is supposed to be there, not poorly made, just designed that way. *
Good point, Gareth. But even if the Juice scissors are perfectly fitted and designed, they still don't do as good of a job as the Vic scissors. Try trimming a hangnail and you'll see what I mean.
-
@shamus said:
*A quick note on scissors. Many scissors have a "set" to them, in other words the blades gently curve in towards each other. So the wiggle you feel is supposed to be there, not poorly made, just designed that way. *
Good point, Gareth. But even if the Juice scissors are perfectly fitted and designed, they still don't do as good of a job as the Vic scissors. Try trimming a hangnail and you'll see what I mean.
That Vic scissors are better I don't deny (best you'll find on a pocket tool IMO), I just feel the Juice ones get a harder time than they deserve. :) Don't know about hang nails but they can manage finger nails, paper, card, string, cloth etc just fine in my experience.

-
Do all Vic models have scissors that preform in the way you describe? I want to get my hands on a Vic to try the scissors.
-
@MeadMaker said:
Do all Vic models have scissors that preform in the way you describe? I want to get my hands on a Vic to try the scissors.The only Vic I can think of that has a different style of scissors is the Spirit. Very different from the rest and, IMO, not an improvement.
Pic in this article shows all of the other Vic scissors: http://www.sosakonline.com/index.php?option=com_content&task=view&id=470&Itemid=35
-
@MeadMaker said:
Do all Vic models have scissors that preform in the way you describe? I want to get my hands on a Vic to try the scissors.If you prefer serrations (as you stated above), you mght be better with Wenger scissors. They have the spring lever that works off the backspring like the Juice rather than the seperate spring on the Vic's. Personally I really like Vic's too, but for serrations try Wenger ... in fact try both and let us know what you think
:D >:DThere are lots of subtle (and some not so subtle) little differences between Wenger and Vic models and tools - scissors, pliers, can opener, everything, you really need to try both to see what works best for you. I'm pretty sure you'll find that one is excellent, but the other is even better :D :D - which is which depends on your preferences

@Gareth said:
The only Vic I can think of that has a different style of scissors is the Spirit. **Very different from the rest and, IMO, not an improvement. **... but could have been SOOO much better just by making that little nub that stops the scissor blades opening a few millimetres shorter - looks like a tricky one to mod too without taking the hinge pin out
-
Are these any good?
I have never heard of the brand but it has USA on the handle so maybe OK?
-
@Cyclone82 said:
Are these any good?I have never heard of the brand but it has USA on the handle so maybe OK?
Bear and Son are well liked here. Some of the highest quality multitools made. Victorinox bought them to get to their patents, which gave rise the the Swisstools.
-
But no 'Bear' section on the forum? Just not big enough to have their own board? I think i will have to get one of these.
-
@Cyclone82 said:
But no 'Bear' section on the forum? Just not big enough to have their own board? I think i will have to get one of these.They are a very small manufacturer. They probably make less than CRKT which also doesn't have its own board.
-
@Cyclone82 said:
But no 'Bear' section on the forum? Just not big enough to have their own board? I think i will have to get one of these.The other reason they don't have their own board, AFAIK, is that they simple haven't changed any of their designs in years so not a lot to discuss. :D
As Ari says though they're solid, well made tools.

I'll also add that the mini Bear is a lot smaller than the LM Juice. Much more akin to the Micra in size and feel. Here's a thread showing it alongside a few other pocket tools.
/topic/11604 -
Thanks, always nice to see other tools side by side so you get an idea of its size.
-
I had 4 new Juice KF4's arrive yesterday and im really impressed. It has a few minor flaws
- slippery surface
- blunt awl
- have to open awl before opening saw
but there is nothing that makes me unhappy with the tool and those 3 things dont really bother me. Now i just want to get a bit adaptor for it to try and see how that goes. I think the Juices are a dated design, it would be good if they updated them a little bit or brought out a new line around the same size.
-
The Juice line is my favorite for EDC, but I'll agree with you cyclone. The line needs to be updated. For those of us who wear dress pants daily, the Juice is the only try pocketable MT availabe, but it does have its weak points.
-
I edc a charge al in my slaks
-
Yes updated or keep making them but add a new line of the same size tools. Or some other brands should get in on the act and make similar sized tools of equal or better quality. I really like the KF4's size but i also like the Minis larger plier head. Maybe something Juice sized but with the larger Mini sized plier head. That would be pretty good.
For now i am happy with my quest fot a small plier type multi tool. There doesn't seem to be much out there thats jumping out at me that i need to get now and thats why i will eventually get bored with my KF4's and Minis and will want to look for more small multis that will impress me just as much.
The next multi i will buy will probably be a LM ST300. I have already bought some spare cutters and a Molle sheath but i have not actually bought the tool yet!
I would advise anyone thinking about KF4's or Minis to hunt them down soon.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login