Wooden scales for a Wenger DIY
-
I had some free time today so I got a peace of wood, a "precision" saw (I don't know the name of it but it's in the pics) a dremel, a chisel, some sandpaper and started playing. This was my first try at something like this and I'm happy with the results so far. I hope you like it too.


















Now I only need to paint it and attach it to a Wenger. Which glue do you recommend? Regular Loctite?
-
Not sure what would be the best glue
, I am sure someone will chime in.Paint :o :o :o , I like the natural look you have mate or are you going to varnish/clear coat them
.I am REALLY keen to do some wood SAK scales , just have to finish my knife blank project , gluing tommorow :ahhh :ahhh , I am going to use a Epoxy glue. Knife blank project has been a bit of a saga. Looking forward to dressing some simpler shaped knives ::) :D :D.
Great pics mate 8) 8) Looking great mate

-
Wow! That's amazing! I'd use rubber cement. It holds well, but is removable if need be.
-
Nice work!
-
Thanks, guys.

I believe the "paint" is going to be varnish and clear coating. I like the natural wood look better too. Sorry, my english isn't that great in the wood working field :D . I've trimmed the inside edges and corrected the "jaggedness" and polished the scales a bit. I'm off to do some "wood protecting" on the scales now.
@Mr. Whippy
Rubber cement
what's that in Croatian again.
:D :D I believe I know what you mean. Might try that. Thanks 
-
This is what I use on scales:

-
That’s some very neat work Enki

I would call the saw a coping saw or possible a jewelers saw

Have you thought about using some kind of oil instead of varnish (teak or linseed oil) I find it easier to apply

-
They look excellent mate.
BTW it's called a 'coping saw' in English. :)Tony beat me too it. ::)
-
@sparky415 said:
Thats some very neat work Enki
I would call the saw a coping saw or possible a jewelers saw

Have you thought about using some kind of oil instead of varnish (teak or linseed oil) I find it easier to apply

I thought about oil, but decided to only clear coat this one. I already aplied two coats, will sand it tomorrow and apply the last coat.
I tried googling that coping saw and found that it is in fact the fretsaw.
http://en.m.wikipedia.org/wiki/Fretsaw -
That’s some very neat work Enki

I would call the saw a coping saw or possible a jewelers saw

Have you thought about using some kind of oil instead of varnish (teak or linseed oil) I find it easier to apply

I thought about oil, but decided to only clear coat this one. I already aplied two coats, will sand it tomorrow and apply the last coat.
I tried googling that coping saw and found that it is in fact the fretsaw.
http://en.m.wikipedia.org/wiki/FretsawMy mistake

Looking forward to tomorrow

-
**Wow! that's great! ** Really nice progess pictures too!
-
Looks great. I love the recessed scale. Might have to try it on one of my vic's some time.
-
nice work! congrats!
-
After second coat, sanding and third coat.



-
In a tight spot.

And where I play.


-
very nice work mate, cool workshop as well, sadly mine is full of bikes and only have a shed :-\ i do most of my playing in the kitchen when all go out :D look forward to more pics

-
Nice set up mate
.
Less Red Back Spiders too in your work shop I bet , I had a close encounter yesterday :ahhh :ahhh.I am really enjoying the project mate 8) 8) 8)
-
That's a very tidy workshop Enki

I'm looking forward to seeing this finished
Do you know what kind of wood you are using?
Spiders Mat?

-
@sparky415 said:
That's a very tidy workshop Enki
I'm looking forward to seeing this finished
Do you know what kind of wood you are using?
Spiders Mat?

Honestly, I'm not sure. I had a bunch of those it lying around and I decided to give it a try as I thought I'd mess a bunch of those up before I succeeded. It was used as a divider of layers on a pallet of Bramac roof tiles so it could hold up fine. But who knows. I have a peace of oak I intended to use but I liked how my trial run looked so I decided to keep it. I'll use the the oak to make new scales for a Vic Camper, should be easier, less holes to drill out. :D
-
I have a lot of 'unidentified' wood in various boxes here as well, lots of it got rescued from skips/dumpsters ;)
Looks like you have a nice solid old workbench to work on Enki

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login