My tool addiction just took a turn for the worst ...
-
@MultiMat said:
Nup , sorry mate , I think you may find you need a Spirit
:D :D :D :DThat is a definite possibility - I'll see how I feel about the size & weight of the SwissTool X and go from there.
I do have a LM Wave currently and it is a nice tool, but you have to open up the pliers to get at a lot of the tools and then a whole bunch of tools open up in a clump - it seems to me that the Victorinox MTs are just made a bit better.If I'm happy to carry the bigger & heavier SwissTool then I wont worry about a Spirit at this stage, if I find it too big or heavy then I'll probably buy a Spirit at some point.
-
For the love of God, stop talking about a Spirit ...

;)
-
@Mercury said:
C'mon man, now I'll be ordering a flippin pioneer next. Jeez, I gotta learn to stop reading Victorinox threads. I can usually resist the Leatherman temptation, but rarely can I avoid buying a SAK after seeing well shot photos of them. Yours, BTW, are great!Every time I'm tricked into getting a new Vic I'll drag somebody down with me ... >:D
I have the same problem, when I'm thinking about buying a new Leatherman, I'll think about it a lot before I actually buy it. Perhaps also because the average Leatherman is a lot more expensive than the average Vic (at least here in Belgium). A leatherman will always cost more than 100 Euro here, while a 4 layer Vic will set you back for 20 or 30 Euro, so when I see one in a local store, it's damn hard to resist ... ::).
And there's just something about these Victorinox knives ... I never knew this untill I bought my first one a few weeks ago (the Huntsman). And also, when you take out a Skeletool in public here, 99% of the people look at you like you're a serial killer (let alone a MUT :o), but nobody will look at you when you take out your trusty Swiss Army knife ... I just love it ...

-
@Top-Gear-24 said:
For the love of God, stop talking about a Spirit ...
- We are here to help addicts, but only as enablers.
- Carrying a SAK & a MT gives you more options and you will be MUCH better prepared.
- Resistance is futile, you might as well just order one now.
The SwissTool Spirit X would be my pick - nice selection of tools.
If you are carrying a Pioneer and add a Spirit then you gain a pair of pliers + saw, file, scissors and a couple of other tools.Have you ordered it yet?

-
@Top-Gear-24 said:
For the love of God, stop talking about a Spirit ...
;)
My lips are sealed ....

>:D -
My lips are sealed as well, BUT my Photobucket appears to have a leak
>:D :D :D :D :D


-
You are horrible people and should be ashamed of yourselves.


:D -
Some people actually avoid snapping their SAK's ??? ??? :ahhh :ahhh :D :D
I try to avoid snapping any blade; it's blade abuse, in my opinion. :/
I am with sazabi! If you snap the blades , the edge gets a bit of free damage towards the tip when it slams on the stop ( liner and or backspring) at least when new. After much re-sharpenig it might be a different story.

Regards,
jatrias
-
Party poopers , let em sing I say :P :D :D :D
If you get lots then you can spread the 'wear' out so it does not become a problem :P :D :D :D
-
Some people actually avoid snapping their SAK's ??? ??? :ahhh :ahhh :D :D
I try to avoid snapping any blade; it's blade abuse, in my opinion. :/
I am with sazabi! If you snap the blades , the edge gets a bit of free damage towards the tip when it slams on the stop ( liner and or backspring) at least when new. After much re-sharpenig it might be a different story.

Regards,
jatrias
It is interesting you mention this. I have noticed this on all of my alox 84 mm Cadets, but it doesn't touch on my 84mm Recruit, or any of my 91 and 93mm knives.

-
Some people actually avoid snapping their SAK's ??? ??? :ahhh :ahhh :D :D
I try to avoid snapping any blade; it's blade abuse, in my opinion. :/
I am with sazabi! If you snap the blades , the edge gets a bit of free damage towards the tip when it slams on the stop ( liner and or backspring) at least when new. After much re-sharpenig it might be a different story.

Regards,
jatrias
It is interesting you mention this. I have noticed this on all of my alox 84 mm Cadets, but it doesn't touch on my 84mm Recruit, or any of my 91 and 93mm knives.

The first time i notice this, was while unboxing my 08 alox victorinox soldier. Took it out of the box open the blade for close inspection ( perfect edge) snap it close, checked the other tools and alox scales ( this was my first alox model) and just before putting the soldier back in the box, opened the blade and voila! A good 6 to 8 mm worth of rolled and nicked section of edge from the tip. A few passes on 400 grit and 600 grit wetndry and all was good again!

-
It's just awesom....
It's precise like Swiss Watch :D :D and why am I not surprised with that?!? ???
:D :DHavin in mind how small it is, it sounds like small rattle snake :D :D
But I wouldn't use it on heavier duty tasks, that's why I got wrench....
-
@edcgear said:
It's just awesom....It's precise like Swiss Watch :D :D and why am I not surprised with that?!? ???
:D :DHavin in mind how small it is, it sounds like small rattle snake :D :D
But I wouldn't use it on heavier duty tasks, that's why I got wrench....
Yeh I have busted good quality Aussie made Sidchrome 1/4 inch ratchets so yeh I would not push the wee ratchet past reasonable usage situations.
I agree amazing quality & clever too , NICE :D :D -
So far I've withstanded the urge to get me a Victorinox Spirit :D .
But I did buy myself something else ... :-[


Damn these things are addictive ... I went to my local "army-store" to buy a nice red SwissChamp, but when the guy at the counter opened the box there it was, this beautiful black/shiny SwissChamp. He got another box out with a red one, but I already fell for this black beast ... ::)
-
Good move!!! You can get a Red one the next time.... or just another black one!

-
@ICanFixThat said:
Good move!!! You can get a Red one the next time.... or just another black one!
Last Thursday I went back to my SAK provider and I got myself the red one ... ::)






-
Top-Gear-24, you are ok so long as you don't start using SAKWiki as a shopping list. I must add though, that buying the same knife in a different colour is one of the first warning signs of collectoritis.
:D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




:D :D