Show your slip joint's thread!
-
A reall y nice guy on another forum sent me a few things the other day to help me on with my slipjoint collecting,
i took 2 of them out on a little bike ride wed morning in the sun



-
A couple of nice users there Zed! What brand is the toothpick?
-
@NutSAK said:
A couple of nice users there Zed! What brand is the toothpick?thanks terry, the toothpick is hammer brand U.S.A
its got the metal with plastic over type handles that are new to me,it was in my pocket today although i think its blade is over 3inches so not really legal uk EDC, :(I got this McGrew as well but dont know much about them yet,

-
@NutSAK said:
Thanks for the news, I'll keep an eye on SMKW for the new Robeson run. I've seen pics of your Robeson Railsplitters many times as I've researched--love them all, especially that horn Mastercraft. I finally have an S&M amber wormgroove railsplitter on the way now. I'm really looking forward to that one.
I also picked up a #73 Northfield "S" EDC in blood red bone for a decent price.I suggest watching their show as it's likely the only way you are going to catch them, at least until some make it to Ebay. The last Series that was produced only made it to their show. None of them ever wound up on their website or in their cataloges. They generally sell out quick.
Even recently they have had several releases of Robeson "Seconds" in the past few months, all from the Pocketeze Series.....all sold out during their airings.
2xTap
-
Zed,
Nice additions! You collection is really growing. That McGrew is a neat looking Serpentine Jack, a brand I had never heard of before. Pretty cool!

2xTap
-
Got a couple new one's in recently. Earlier this week actually but today was when I finally got around to taking some pics.
This first one is a new old stock Great Eastern. 2007 production Northfield Muskrat in Snakewood......

Am a little disappointed in this one as the handle material doesn't match well between sides, as you can see here on the pile side......

Still, it's a rock solid, well built piece of typical GEC quality.......

Next one is my first Case Humpback. For Stockman patterns from Case the #75 and #47 are the only ones that have really ever caught my interest. But when these new #046 patterns were released, I was intrigued.


It's in Smooth Chestnut Bone. It's a good looking piece. For a Stockman it's a tad on the small size for me but it does fit pretty well in the hand. F&F is great, the knife is pretty much rock solid. And I was surprised by the stoutness of the backsprings. I've found most of Case's smaller patterns usually come with what I call light backsprings, not lazy just lighter than what I like. But this thing has backsprings on it like if it was made by GEC. Very nice!
What I am not sure about is the fit of the backsprings. Mine has what appears to be a slight hairline gap running the entire length of the knife between both backsprings.....

.......it's slight, and I can see no light through it. But as this knife doesn't use a brass spacer between the springs, the springs being butted right up against each other, I don't know if this is truely a gap or just a slight rounding of the edges along these backsprings that make it appear to be a gap. As I said, I can nothing through there when held up to a light. :-\
But anyway, overall it's a great knife. And the hefty backsprings were a welcome surprise. I do believe I will be getting more of this pattern.

2xTap
-
Double tap, you always show some awesome knives.
-
Oh, that humpback is VERY nice. That's the first I've seen of the smooth chestnut, and it looks like they've done a great job with it. I prefer the look of smooth scales on this pattern--this one and the micarta whittler both have very clean lines, and I think the jigged scales disrupt that look. Good to hear that your main isn't lazy like the one on my whittler too. I would suspect you're right about the rounded edges on the springs, considering Case's habit of over-polishing their steel. -
trey,
Thanks bud, I try! ;)
NutSAK,
They did pretty well with the smooth bone on this Case. I really like the mark side scale as it has a slight mottled look and is a bit lighter in color. The pile side is darker and more solid throughout, and while I do like my smooth bone a more solid consistant color.....this Chestnut color actually looks real good a bit mottled with the variation of hues. Can't say that I find any of the jigged variations better or worse for looks on this pattern. Need to get a jigged version in hand to really say and I am eyeing the Harvest Orange one as my next possible #046.
I was really surprised by the backsprings. When I took it out of the box I was expecting #18 type backsprings, rather light. I found out quick this wasn't the case and had to really set my thumbnail into the pulls on this one to get the blades open. And on all three. I really like that. This thing walks and talks very well.
2xTap
-
Case humpback
very nice 2xtap 
-
Traditional family photo...
-
Thanks Paul. Yes, that Wharncliffe mini trapper is the same model as yours. Coincidentally, I got mine just a couple of weeks before you first posted a pic of yours.
See here: /post/479846
There are only a couple in the pic that I haven't posted here before. At lower right, the Great Eastern Cutlery Northfield #73 Scout in blood red bone, and just below the Case Barlow is a Queen trapper jack or "dogleg" jack in birdseye maple. The Scout is my newest knife and for some reason the birdseye maple on that Queen is very hard to photograph. When the birdseye is photographed, the white balance has to be just right or colors show that aren't present to the eye. This photo is fairly representative--it appears grey with slight purpleish tones.
-
NutSAK,
Very nice group pic. The vibrant colors stand out real well between them all. Cool background choice as well, gives everything a almost wet look.
I know what you mean with the BEM on the Queen. For ones with lighter scales the purple comes out a bit more. Of the two I have the colors vary noticably between the two. My Gunstock has none of that slight purplish hue and is much darker, almost green in a way......


On the Large Stockman you can just barely get a hint of that slight purple. The grain of the wood itself I think plays a large part in the color variation.......

My Gunstock version is the only one from the BEM run I've seen with this particular look, all the others I have handled or seen pics of look more like my Large Stockman.
2xTap
-
Thanks.
Yep, that Stockman turned out just like mine does in most photos. I've seen other folks comment on the more greenish-tinted BEM online, but all the stock photos show that purplish tint too. I'd say the greener ones are less common. Regardless, I've not seen a photo yet that does these scales justice (no offense ;) ). They really look and feel great in person, IMO.
BTW, I now know what everyone is talking about when they say the #73 has nailbreaker springs. Luckily I have tough nails, as I plan to use this one A LOT. I almost wish I had bought a Tidioute with the normal nail knick, as they seem to be farther out toward the end of the blade and possibly give a bit more leverage. As it is, I do love the look of the long matchstriker pull and swedge on the Northfield.
-
NutSAK,
Yeah, the greenish looking BEM isn't all that common. At least from what I have seen. And either way, this handle material as it comes from Queen has to be in hand to really be appreciated. I remember when these were first released the tons of complaints people had about the look of the BEM. Even I at the time thought it looked weird with the purplish hues.....but it grew on me quick. And after getting them I find it a even better looking scale material.
The #73's can be stout, the two I have ain't quite in the nailbreaker class but they have decently heavy springs. Both of mine have the forward nail nick. Ain't got no #73's with the long pulls to compare them to so I can't really say if their is any perceivable difference. Now the bigger #23's, these won't make much difference what pull they have. You get one of the real stout ones and you'll bend a nail back regardless if you don't do it right. I've got two in particular that are very unforgiving.
2xTap
-
this old camillus is in my pocket today,


-
Top: Great Eastern Cutlery #33 Northfield Conductor, Ebony Wood. (Collectorknives 2011 forum knife)
Bottom: Great Eastern Cutlery #66 Tidioute Calf Roper, Micarta.Great Eastern Cutlery #73 Northfield Scout, Blood Red Bone
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
