charge tti metal file
-
You could try that but you might end up with a 'floppy' file
.Yep sadly it seems to be a common problem with the tti :( :(.
If it really bugs you you could send it to Leatherman & hope the replacement does not have the same problem
. -
I don't ever use files, and if I ever needed one I'd use a separate file. Odds are I might never open the file again.. I get compulsive about making things perfect but if it is the way its suppose to be then I'm fine.
Thanks for the replies.
-
That diamond file is pretty bloody handy mate
:D :D :D.It is a shame Leatherman has not sorted the file rub issue , for some it is not a problem , me I reckon one of their premium models should be fault free.

-
@MultiMat said:
That diamond file is pretty bloody handy mate
:D :D :D.It is a shame Leatherman has not sorted the file rub issue , for some it is not a problem , me I reckon one of their premium models should be fault free.

I agree. Like I have read from others, I will need to adjust the torx screws so that the tools are easier to pull out. That requires an additional purchase. A nice touch would be if leatherman included the torx wrenches with Waves and Charges etc. It couldn't add much cost, IKEA does it :) .
-
LM definitely does not encourage owner fiddling/adjusting their MTs.
The Torx fasteners they use are the security type , they have the post in the middle of the fastener.
So you need to buy 'special' Torx bits.Then there is those knurled as well fasteners.In Leatherman's defence they do have a very good warranty service.
-
You can get round it by pushing the file down slightly when you close it. It works on mine.
-
I sent mine in and they sent me a good one. How old is the Charge? I am not sure, but I believe that Leatherman fixed the problem.
-
I realized the issue has to do with the liner lock pushing the file out toward the handle. The same occurs with the blades and saw but since they do not have texture it doesn't have the same effect of "nails on chalk board" sound. I also found that the looser the screws got the worse the problem because it allowed the liner lock to expand more. With about 2 hours of tinkering I got my charge to work like a fine watch, with all the tools coming out very smoothly and the charge opening and closing very smoothly.
-
Nice work mate
:D :D :D.I hope you used thread locker so you do not have to go through the rejigging process again
:D :D :D :D. -
I just push in on the file tip when opening or closing,just remembering to do it is the hard part,love the file and the tool other wise.

-
@Malarauko said:
You can get round it by pushing the file down slightly when you close it. It works on mine.I was about to say this- a little pressure on the way home does the trick.
-
I just got mine brandnew. Still has the File Rub Issue. Marked 02 16 and 01 16 inside each handles. Thats feb 2016 and jan 2016 production correct me if Im wrong. Is there a known easy fix or work around already?
Sent from my SM-N920W8 using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
