Leatherman Warranty Adventure
-
A few day ago I posted at LM's facebook page that I losta screw to the pocket clip of my c33Bx(pictured bellow). Juli, from LM, emailed me for my homaddress, and yesterday I got a package which had the raplacement screws and a few other complimentary "sundries"!

So my experience with LM is definately positive!!!!

NOTE: c33Bx pictured bellow, is at LM's facebook page!!
-
@Ashley said:
I would be very mad.
I sure hope they make it right. I'd also be very mad about not getting my exact tool back.Unless you actually include a note requesting to get your exact tool back, leatherman reserves the right to simply replace it with another tool. If it is a discontinued tool, they replace it with another they deem of equal or greater value. They note this policy in their warranty information, so be aware.
I've had nothing but great experiences with Leatherman. I live just outside of Portland, so when I needed to, I just drive on over! Walk in, hand them the tool, fill out a small (less than half a sheet of paper) form they have and wha-lah! They handed me a new tool! The one time I wanted to keep my original riveted pst, I just told them so and I got that back.
-
As some of you may have read here, I bought a Charge TTi a few months ago, when I got it I noticed that there was something weird with the ruler. On both sides there’s a ruler from 10 cm to 20 cm (and from 4 inch to 8 inch), so I don’t have a ruler from 0 cm to 10 cm (and from 0 inch to 4 inch).
See topic /topic/26164
Anyway, contacted the internetshop (an official Leatherman dealer according to the Duth Leatherman importer), and untill today I haven't heard anything from them (I've contacted them twice, without succes...).
So I contacted Leatherman USA, and explained the problem, they answered real quick and told me that they had send an e-mail to the Belgian importer that they should give me a new Charge TTi if I wanted that. They also send me a cool Leatherman "Oregon Proud" T-shirt :).
So, I send them (the Belgian importer) an E-mail asking if I could drive over there to exchange my Charge for a new one, it’s only like 40 minutes away from my home and I thought it would be a bit ridicules to have it send to me if I could just drive over there and pick it up myself. After a couple of days I received an answer. They told me that it was possible to pick up the new Charge myself, and if they had to send it to me, I would have to pay 5 Euro (= 7 $) shipping cost, which I understand. But … they also said that I would have to pay 15 Euro’s (= 21 $) administration fee, now I’ve read a lot of amazing stories about Leathermans’ great warranty policy here and I’ve never read anything about an administration fee …
weird …

Anyway, I’m getting the feeling that the Belgian importer people are trying to get something out of this for themselves, so I decided not to exchange my Charge for a new one, not yet at least, who knows in the future, maybe ten years from now, I could still make use of the warranty to get another one because then, 15 euro’s would be a sweat deal to get a brand new tool, but now, my tool IS brand new, and I don’t feel like paying 15 euro’s just to get the tool that I should have gotten in the first place.
So I send Leatherman USA an e-mail explaining the situation and they asked me a bit of time to do some research. And said that they will get back to me as quickly as possible. This was the 29 of march and until now I've heard nothing.
Anyway, I really appreciate what the nice people at Leatherman USA have done for me, and I know that, had I lived in the US, this problem would have been fixed ages ago (I wrote this in my last e-mail to Leatherman USA). But I've got the feeling that the Belgian importer is only thinking about making money, and they know nothing, NOTHING !!!, about the way Leatherman USA treats their costumers. So I told the people at Leatherman USA that I've got a problem now, I still like their tools, I like their service, but I don't want any of the money I spend on tools going to the Belgian Importer. Guess I will have to start buying Victorinox tools (started with the SAK's, and thinking more and more about the Vic tools now ...).
So, making a (very ... ) long story short, I guess Leatherman service is great in the US, but anywhere else you have to be lucky with the local importer.
Sorry for my rambling ... :-[
-
That 15 Euros admin fee sounds like a load of BS >:( >:( >:(
-
The shipping fee I understand but the I wanna be a douche fee is crazy to say the least.
-
First I've heard of an Admin fee, that's surely something the importer has made up. >:(
-
OK, status update.
The pre-paid envelope arrived and the Charge was duly dispatched using the UPS label attached. I anxiously traced its journey across the country (well, you know how it is), and it was due to be delivered yesterday by close of business. Today the status just says "Last Location - Portland, OR". :-\
So now I get to wait and see if it turns up next week, or if I need to start talking to people about a claim. I'm starting to be very glad I bought a Wave to stand in for the Charge instead of just using something else out my stash; my Pulse is awesome but the OHO blades are hard to give up. :D
-
@Gareth said:
First I've heard of an Admin fee, that's surely something the importer has made up. >:(Its not unusual (it happens all the time ;) ).
As I said in other posts I was asked for 35 (or maybe 45?) euro in order to replace a Squirt P4, 25 if I had a receipt showing I bought it from them…. And then they complain about people buying things online..
??? -
hey there Big T, where was that photo of your LM knife taken?
After seeing that photo my computer, completely of it's own volition mind you, opened an ebay search for the Crater C33, and inexplicably I now have one on the way.

-
So finally, this 4 1/2 week long odyssey is over; and they've sent me a Franken-Charge!

I present to you all, the Charge TTTi:

Cap crimper, gut hook, scissors, and 154CM blade.
Obviously, they inadvertently replaced an S30V blade with this one on a Charge TTi and sent it out. I'm just going to keep it, mostly because it's not worth waiting two more weeks to get the tool right, and because it's nice to have a unique tool from the factory. 8)
I know the S30V blade is more valuable so I'm getting ripped off in that regard, but I also know that it's a b!+@# to sharpen, so there's that. ::)
-
I would personally be very pleased with that tool.
-
As long as it's not something that affects how the tools work (and it still cuts, right?) then I'd be perfectly happy with a factory 'oops', means you know it's a one-of-a-kind.

-
@Gareth said:
As long as it's not something that affects how the tools work (and it still cuts, right?) then I'd be perfectly happy with a factory 'oops', means you know it's a one-of-a-kind.
This is where it would get expensive for me. I would be compelled to put the "one of a kind" in a draw, and go buy another one to use. :D
-
@turnsouth said:
This is where it would get expensive for me. I would be compelled to put the "one of a kind" in a draw, and go buy another one to use. :DYeah.... See, I already told my wife I want to get another TTi for the extra bit kit/leather sheath, so that's one more reason to move forward on that notion. This place is going to get me in trouble...
:ahhh -
This is where it would get expensive for me. I would be compelled to put the "one of a kind" in a draw, and go buy another one to use. :D
Yeah.... See, I already told my wife I want to get another TTi for the extra bit kit/leather sheath, so that's one more reason to move forward on that notion. This place is going to get me in trouble...
:ahhhDo what I do:
Have a secret toolbox full of your non-users. Put it in plain sight, but out of reach. She'll figure it's just a box of hammers and broken screwdrivers. ;)
-
@Mr. Whippy said:
Do what I do:
Have a secret toolbox full of your non-users. Put it in plain sight, but out of reach. She'll figure it's just a box of hammers and broken screwdrivers. ;)I don't really have "non-users" per se, although I do have a few that are retired. For the regularly used ones, I make sure to have one in each car, some with the workbench tools, some with the camping stuff. Keep them spread out and less conspicuous. Last time I got them all together for a photo she was not amused at the tally.
:ahhh
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login