Small bit driver (blast,wave...)
-
I honestly don't think I've ever used the small bit driver. The few times I've tried I've just found the rest of the tool way to large and clumsy to easily manipulate the screwdriver comfortably.
I kinda like Mr. Whippy's idea, actually - find another place to put that screwdriver. Maybe in the slot where that pull out lanyard ring is? And maybe put a small plastic thumbpiece in the middle for turning.
-
Sometimes, companies do this purposely to leave an area of a tool that they can improve on to create market for future tools.
If they come out with "perfect midsize tool" then there will be little market for future tools b/c there will little they can do to improve. I know it doesn't always apply but it does apply and, I think it makes sense here.There are several little but simple things LM can do improve some of their tools.
i.e. Charge and Wave...- What Mr. Whippy said
- Create longer bit holder
- Provide double ended Flat/Philips bit instead of Phillips/Phillips bit
3.1 Now remove the flat head screwdriver
3.2 Use ends of saw and file to make it into Flathead screwdrivers - Awl!
- Provide few mini bits or bits with real small flat and phillips ends for electronic work
-
I'm a die hard fan of the mini bit driver.
Glasses, wireless microphone transmitters and electronics of all types, small recessed reset buttons, dip switches, and basically any small buttons, screws or things that need poking.
-
I don't think they should remove the flat head screwdriver, because I don't think of it as a screwdriver. I treat it as a pry bar. I don't think it would be a good idea to pry with the bits (the bits would probably be fine, but not the bit holder). Also the saw is very thin and would not function at all as a flathead screwdriver. I kind of wish they replaced the small bit driver with an awl, but it definitely personal preference whether the small screwdrivers or an awl would be more useful. The Wave hasn't been updated in seven years, and even including the minor additions to the Charge (gut hook, crimper of questionable utility to normal people) it is very close to perfection as far as its general layout allows. On the other hand, I don't even have a Wave/Charge anymore, I've moved to the Spirit. I guess what I'm saying is that without a major redo of the platform which isn't called for because of how good the tool is already, there's not much to be done. Sure we we would all love a
black oxideTiNi Charge XTXi with D2 main tools, super ultra VG10 million blades, billet pliers with carbide cutters, and a titanium frame but it's just not going to happen. I also reject the idea that LM purposely left part to improve on. I think if they were sitting on a great idea since 2004, it would be out already.On topic, the screwdrivers work great for watches.
All this Wave/Charge talk makes me want one again.

-
Thank you gentlemen, very helpful. Still not sure if whether I'll go with the fuse or blast.
-
One of the above posts mentions leatherman should change the phillips phillips bit to phillips straight. You can by either bit to customize your leatherman already. So that is done.
I use the mini but to scrape little cracks when needed also. -
um, I use mine to fix my glasses, oh wait...
-
The small bit is awesome for working on Scalextic/slotcars!
-
I once used the small bit on my Charge TTi to de-pin an electrical connector that melted after it shorted out on my motorcycle. I broke the bit doing it, but it got the job done and if it weren't for that thing I would probably still be stuck on a trail on the top of a mountain in the middle of nowhere...
-
I took out the small bit and stuck a toothpick in it.
Just kidding! ;)
But hey I got the copyright to that idea! :P
-
Toothpick isn't a bad idea! :)
I think they should make a mini precision bit kit to go with it. Small torx, hex and other fiddly bits etc, then at least it would serve further purpose for being there. I'd replace it with an awl given the choice though.
-
-
I'm pro eyeglass driver, even as just a tiny pokey tool for y'know... Pokey stuff
-
@nuphoria said:
Toothpick isn't a bad idea! :)I think they should make a mini precision bit kit to go with it. Small torx, hex and other fiddly bits etc, then at least it would serve further purpose for being there. I'd replace it with an awl given the choice though.
One could actually use the bit as a toothpick ;) ya know... now I'm wondering if anybody actually does that... ::)
@maximus0723 said:
Sometimes, companies do this purposely to leave an area of a tool that they can improve on to create market for future tools.
If they come out with "perfect midsize tool" then there will be little market for future tools b/c there will little they can do to improve. I know it doesn't always apply but it does apply and, I think it makes sense here.There are several little but simple things LM can do improve some of their tools.
i.e. Charge and Wave...- What Mr. Whippy said
- Create longer bit holder
- Provide double ended Flat/Philips bit instead of Phillips/Phillips bit
3.1 Now remove the flat head screwdriver
3.2 Use ends of saw and file to make it into Flathead screwdrivers - Awl!
- Provide few mini bits or bits with real small flat and phillips ends for electronic work
You said it there! Just look at the PST, 21 years in production!

-
@nuphoria said:
I think they should make a mini precision bit kit to go with it. Small torx, hex and other fiddly bits etc, then at least it would serve further purpose for being there.This! I just got a Wave, an it's the first LM I have with the small bit driver. Started searching for a bit kit and realised the bit that came with it was the only one made. Tiny Philips and torx bits would be great for tinkering around with small gadgets and computers.
Oh, and joining the wave of recent thread necros :D
-
Using the small bit as a toothpick is not a good idea. Bad for your teeth, I'd imagine. If it were brass, it might be a different matter.
I have used the small bit to clean the saw teeth of my Wave after cutting a bunch of green vegetation that got all gunked up in it. It worked great for that.
Upon thinking about it, they could make an adapter bit for the full-size bit holder that held the small bit, thereby using up one slot in a bit card (to hold the adapter), and not wasting the space in the tool.
The flip-side of the adapter bit could be an AWL!
:DI haven't actually used my small bit for my glasses, but I always have a tool that has a jeweler size screwdriver, and have needed and used those in the past.
-
yah, I replaced my small bit driver with a modified awl from a Rebar.
@ Lynn, I often thought about taking the small bit driver and re-profiling it to fit into the large bit driver. Maybe that cna be the first project of the new shop.
-
So who will make some tiny bits for the adapter then?
Seems my idea was popular, so we should do something about it!
-
@nuphoria said:
So who will make some tiny bits for the adapter then?Seems my idea was popular, so we should do something about it!
Oh, I was talking about taking the original factory one and see if I could grind it down to fit into the standard bit driver, like a bit adaptor in a bit adaptor...
Failing that...maybe a 4mm one?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login