Car boot finds
-
Doesn't matter if it's solid mate. I was wondering if it was meant for hooking into the larger tube and hanging into the lower tube for maybe drawing fuel up so you could refuel while running .... obviously not :D
-
Its a .....umm

Fill it full of petrol and light it just to see what happens
Arrgh, you've got looking at bill hooks on ebay now Tony.

:D
Never mind ebay just prod me or Tony to grab you one out a rusty bucket under a paste table next week :D
They are quite rare down here Guys, Thats the first one I have seen for ages
-
Other than making hoodlums think twice about messing with the fellow carrying one, what were those big billhook blades intended for?
-
Mostly wood and hedge management. They're the British/European equivalent of a machete I'd say.
Embrace Woodlands! Hedgelaying, Coppicing and Hazel hurdles Film
-
@Gareth said:
Mostly wood and hedge management. They're the British/European equivalent of a machete I'd say.So, I can walk down the street with it and nobody will bat an eyelid..... :D
Maybe the hook was also designed to pull down branches, or to also act as a skythe.. A Multitool!
Must buy one, for some reason.... will find one later... -
Its a bit sharper now with a Micarta handle ;)


-
@sparky415 said:
Its a bit sharper now with a Micarta handle ;)

zombie hunting time :ahhh :ahhh 
-




Dks FYI, There's hundreds of different types of billhooks in the UK, I have just copied this from another forum
"they produced 100's of different patterns. The reason being was that before billhooks were produced on mass from a central foundry they were produced by the local smithy and then by the local foundry. The advantage being that the local foundry knew what the local landscape and countryside was and by association they knew what shape of hooks were needed to manage the hedgerows and the woodlands - every county is different."
There's a lot of interesting tools in here

-
I found a few bits n bobos today, but my youngest (4) found this whistle, i want it :ahhh she loves it though and even wanted some old keys on it :D its really loud, it reminds me of the old police whistles :D

-
Nice finds guys!!

-

My haul from the car boot today. Been going on and off for a few weeks now. It's a good way to spoil the kids without spending any real money. Anyway today being Farther's day the wife told me anything I wanted from the car boot she would get me. More importantly, I was allowed to go straight to the garage and potter. Good day. The princely sum for this load of loot? £1.50! One of the BAKs is smurfed. The springs have gone. The only problem with the other being a bit of the horn scale is missing on both sides. Has anyone ever replaced this? -
Nice haul and price Farman!

Do the footprints have the original screw?
I'm not sure about replacing the scales, I guess its doable :-\ someone might have had a go on here? Neil?

-
@sparky415 said:
Nice haul and price Farman!
Do the footprints have the original screw?
I'm not sure about replacing the scales, I guess its doable :-\ someone might have had a go on here? Neil?

x2 a bargain

-
Hi sparky
Not sure how I would tell. It is more of a bolt without a nut fitting into the threaded part of the footprint. The bolt had approx the same amount of rust on it as the rest of the tool so I would guess yes. I was quite impressed to see footprints stamped on both parts of the tool. Apart from rust I don't think the tool has been used much as the jaws show no sign of wear. There are markings on the bolt, which I will take a photo of later. -
@sparky415 said:
Nice haul and price Farman!
Do the footprints have the original screw?
**
I'm not sure about replacing the scales, I guess its doable :-\ someone might have had a go on here? Neil?**
I haven't. So long as you're careful removing the peened head I can't imagine it'd be difficult. They're bigger and chunkier than SAKs so should be a bit easier to work with.
Bargain haul by the way £1.50, sweet :D
Tony, that handle looks the biz. In fact that whole billhook is looking pretty tops now

-
@sparky415 said:
Nice haul and price Farman!
Do the footprints have the original screw?
I'm not sure about replacing the scales, I guess its doable :-\ someone might have had a go on here? Neil?

im using the one i found thanks to the screw you gave me! sometimes works better then my bahco pump pliers
-


There you go. You can tell me if the bolt/ screw is original now. Will be interested to know. -
I'd say probably not sadly. :-\ IIRC it'd normally be a knurled head and not so long. Still, it works, so all's good IMO. :)
-
@Ryan, yep they are great on rough stuff

@Farman, I don't know if you have used them before but don't use them on nice shiny stuff like taps! ;) :-[
I only ask about the screw because of the very nice detail on the head (Made in England, Footprint)

I picked up three pairs last weekend and only one had its original screw ::)
I have a pair I brought for work 30 :o years ago when I was an apprentice and am still using them
I love them, I think we will have to start a 'Footprints Owners Club'

-
Nice touch that footprint, any story behind it??
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login