Best portable sharpener?
-
If your knives have a good bevel sometimes all you might need is just the Leather Strop.

-
I really like the EZE-LAP credit card size, diamond coated, stones as well. Carry the 201 #600 grit for must uses, used it on knives,wood chisels, punch- down tool blades, etc. etc. Carry the stone in my abyss wallet. :D
Forgot the humble coffee mug sharpener as well, good article :
http://www.backwoodshome.com/articles2/cantrell105.html -
I have the DC3 - I think it's a tad small but still a useful bit of kit.
-
-
I have both a DMT Duofold and a Doublestuff , plus Strops - the strops get the most use . I just make them out of scrap in whatever shape/ size I need .
Chris
-
Well I use a combo Japanese waterstone. I had one that was 8 inches long so I took my wet saw and cut a piece off of it. Attached it to a small water bottle at the neck with a chain. Inside the water bottle I keep a piece of aluminum foil to form a type of bowl and then soak and sharpen. The stone is 1000/6000 grit.
-
http://smithsedge.com/products/product.asp?id=44&cid=10
I carry one of these in my awol bag, it does a great job

-
My favorite is this:
Gerber Diamond Pocket Sharpener
It's limited in its use in that it's a fixed 30 degrees (just happens to be my personal preference though), but it's inexpensive (the ceramic version even more so, which is strange since they carry the same retail price, must be the word "diamond", people like diamonds, anyway I digress), very pocketable, has a lanyard hole, and does a excellent job. I keep them everywhere, must have a dozen or more...
- On a side note, the diamond one will sharpen just about any steel enough to shave with, but the "fine" rods in the ceramic one give a beautiful finish edge.
-
@tattoosteve99 said:
Well I use a combo Japanese waterstone. I had one that was 8 inches long so I took my wet saw and cut a piece off of it. Attached it to a small water bottle at the neck with a chain. Inside the water bottle I keep a piece of aluminum foil to form a type of bowl and then soak and sharpen. The stone is 1000/6000 grit.that sounds like an excellent set-up, any chance of a pic?
-
I'm EDC-ing this one now:
http://smithsedge.com/products/product.asp?id=46&cid=10Works great plus it's fairly small and compact.
-
@tattoosteve99 said:
Well I use a combo Japanese waterstone. I had one that was 8 inches long so I took my wet saw and cut a piece off of it. Attached it to a small water bottle at the neck with a chain. Inside the water bottle I keep a piece of aluminum foil to form a type of bowl and then soak and sharpen. The stone is 1000/6000 grit.Thanks for the idea.
I have a combo waterstone that broke when Isomeone dropped it. A couple of the pieces would be big enough to work. -
I have a DC4, which works well, especially for small multitool blades.
However, the fine stone was really badly cut and had a wavy pattern on it, really dissapointed with their QC. I still have not managed to sand it smooth and flat. >:( -
Well I use a combo Japanese waterstone. I had one that was 8 inches long so I took my wet saw and cut a piece off of it. Attached it to a small water bottle at the neck with a chain. Inside the water bottle I keep a piece of aluminum foil to form a type of bowl and then soak and sharpen. The stone is 1000/6000 grit.
Thanks for the idea.
I have a combo waterstone that broke when Isomeone dropped it. A couple of the pieces would be big enough to work.Just don't store it in the water or you will have water mush instead of a waterstone. Hence my first stone. If you take a glass/ceramic drill bit and a little water it cuts great.
-
Well I use a combo Japanese waterstone. I had one that was 8 inches long so I took my wet saw and cut a piece off of it. Attached it to a small water bottle at the neck with a chain. Inside the water bottle I keep a piece of aluminum foil to form a type of bowl and then soak and sharpen. The stone is 1000/6000 grit.
Thanks for the idea.
I have a combo waterstone that broke when Isomeone dropped it. A couple of the pieces would be big enough to work.Just don't store it in the water or you will have water mush instead of a waterstone. Hence my first stone. If you take a glass/ceramic drill bit and a little water it cuts great.
I happen to have a few glass drill bits already. This little project was meant to happen.
I store all of my waterstones in water. The 600/1000 has been in water for about 20 years without any problems.
-
Well I use a combo Japanese waterstone. I had one that was 8 inches long so I took my wet saw and cut a piece off of it. Attached it to a small water bottle at the neck with a chain. Inside the water bottle I keep a piece of aluminum foil to form a type of bowl and then soak and sharpen. The stone is 1000/6000 grit.
Thanks for the idea.
I have a combo waterstone that broke when Isomeone dropped it. A couple of the pieces would be big enough to work.Just don't store it in the water or you will have water mush instead of a waterstone. Hence my first stone. If you take a glass/ceramic drill bit and a little water it cuts great.
I happen to have a few glass drill bits already. This little project was meant to happen.
I store all of my waterstones in water. The 600/1000 has been in water for about 20 years without any problems.
Must be the older ones. I think the newer ones are pressed together somehow. Is it a natural stone or manmade?
-
@dks said:
I have a DC4, which works well, especially for small multitool blades.
However, the fine stone was really badly cut and had a wavy pattern on it, really dissapointed with their QC. I still have not managed to sand it smooth and flat. >:(They make a special stone just to flatten other stones.
-
[quote author=tattoosteve99 link=topic=21412.msg497002#msg497002 date=1308788103]
Well I use a combo Japanese waterstone. I had one that was 8 inches long so I took my wet saw and cut a piece off of it. Attached it to a small water bottle at the neck with a chain. Inside the water bottle I keep a piece of aluminum foil to form a type of bowl and then soak and sharpen. The stone is 1000/6000 grit.Many woodworkers store their waterstones in water, even the newer stones. Its not really necessary with the finer grits, but it helps with the coarser grits.
Thanks for the idea.
I have a combo waterstone that broke when Isomeone dropped it. A couple of the pieces would be big enough to work.Just don't store it in the water or you will have water mush instead of a waterstone. Hence my first stone. If you take a glass/ceramic drill bit and a little water it cuts great.
I happen to have a few glass drill bits already. This little project was meant to happen.
I store all of my waterstones in water. The 600/1000 has been in water for about 20 years without any problems.
Must be the older ones. I think the newer ones are pressed together somehow. Is it a natural stone or manmade?
[/quote] -
What would you recommend for a "combo" blade?

-
[quote author=MeadMaker link=topic=21412.msg497183#msg497183 date=1308879625]
[quote author=tattoosteve99 link=topic=21412.msg497002#msg497002 date=1308788103]
Well I use a combo Japanese waterstone. I had one that was 8 inches long so I took my wet saw and cut a piece off of it. Attached it to a small water bottle at the neck with a chain. Inside the water bottle I keep a piece of aluminum foil to form a type of bowl and then soak and sharpen. The stone is 1000/6000 grit.Many woodworkers store their waterstones in water, even the newer stones. Its not really necessary with the finer grits, but it helps with the coarser grits.
Thanks for the idea.
I have a combo waterstone that broke when Isomeone dropped it. A couple of the pieces would be big enough to work.Just don't store it in the water or you will have water mush instead of a waterstone. Hence my first stone. If you take a glass/ceramic drill bit and a little water it cuts great.
I happen to have a few glass drill bits already. This little project was meant to happen.
I store all of my waterstones in water. The 600/1000 has been in water for about 20 years without any problems.
Must be the older ones. I think the newer ones are pressed together somehow. Is it a natural stone or manmade?
[/quote]
[/quote]
Nothing was here. Server fart lol -
For the serrations maybe a diamond coated round sharpener. A small stone for the flat part. You may even find a dual purpose sharpener that has both.
Something like this would work great!
http://www.sharpeningsupplies.com/Diamond-Card-Sized-Sharpener-P19C24.aspx
Not so much for the serrated parts but it might work
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login