Wtb rivet tool
-
Well we could all pitch in and purchase one for a super mod on here then we would have priority to send our stuff and get fixed. Just a thought. :p
-
Now that's a good idea!

-
Let's all pitch in and buy one of these for Neil :)
-
We could get Grant to set up a "special fund" thread for all members to contribute. Then if we had a machine like that then at a business and mod standpoint it would have limitless possibilities.
-
Even old beat up second hand orbital riveters cost hundreds to thousands. Compare that to a couple of pounds for a ball pean hammer and you can see why I don't own one.
For most traditional knifemaking they're superfluous anyway as the handle finish is done last after riveting. But for something where you don't want to mess up the surrounding area, like alox SAKs, it's the perfect tool.
Perhaps I'll find one at a car boot sale some day

-
Like I said in another thread, here is the tool you need. The aircraft rivet squeezer.

Together with the dies it will cost aprox $200.
There are some cheaper ones, $100 -$150. No need to buy the best.
I have quite a few links if you are interested. But you need to contact the manufacturers for advice for the right dies/squeezer set.
-
Damn! :o I've never seen one of those tools before. They look like they might be just the ticket. :)
-
I've done my research and I know this is the ticket.
You have to use solid rivets which already have a head on the one end or make your own rivet with one round head with a piece of a brass rod and a ball peen hammer.
Then all you have to do is to assemble your new SAK and sweeze with the right dies and you have perfect rivets all the time.
I wanted to buy that tool but it's not worth paying that much for total 4 or 5 mods in a mod career.
-
That would be easier to pass around or just keep handy in the shop. Mmmm I wonder if I could make one.

-
It looks like they are designed to apply a LARGE amount of compression force. That must be the key to getting the rivet head to form...?

-
Mmmmm...maybe a modified bolt cutter...

-
@tattoosteve99 said:
Mmmmm...maybe a modified bolt cutter... :think:Hah! :D Funny you say that, as I was just checking out this homemade one on eBay:

-
I have an old around here somewhere...
I believe I will make one. Thanks -
If it works well then its not a bad investment (the children can eat bread for a month >:D ).
However, if it it isn't suitable for the task then its a lot of money to go wrong with.
I've tried a few "homebrew" items in the past and even tried the rivet spinners that go in your pillar drill. So far nothing has held a candle to a ball peen hammer.
We need someone with slightly deeper pockets than me to give it a go first :)
-
@Neil said:
If it works well then its not a bad investment (the children can eat bread for a month >:D ).However, if it it isn't suitable for the task then its a lot of money to go wrong with.
I've tried a few "homebrew" items in the past and even tried the rivet spinners that go in your pillar drill. So far nothing has held a candle to a ball peen hammer.
We need someone with slightly deeper pockets than me to give it a go first :)
ok ball peen hammer it is. How long should I leave the rivets on the end to get the proper flare?
-
Depends how you want the rivet to look when done but 1 to 1.5mm proud of the surface.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login