Car boot finds
-
@Paul,
Did you want that Ax head? Its 7 ½ x 4 ¼ , too big?@Gareth,
I nearly missed them, I was looking in a box of rusty tools as the owner was showing a guy some slippys (nothing that appealed to me)I said thanks and as I was turning to go the first guy opens a box full of stuff, a bit of red caught my eye (as he was looking through I'm thinking don't take the SAK's Don't take the SAK's >:D )
He left and I dived in, I should have picked up a few other bits he had ::)

2nd (waiter?) and 3rd down on the left have the split corkscrews
Middle right is a Wenger
Bottom right sneaked in when I wasn't looking, made by 'stainless steel'
Bottom is ''stainless steel Japan' and has 'Richard Cowling' scratched on the back of one of the springs :D
The cork screw is broken off and the spring for the scissors is missing
-
Ooooh, a vernier caliper! :) Does it have a name brand on it Tony? :)
Only Draper which is a fairly cheap make over here Bob

(made in spain I have just discovered)Calipers are (by far!) the most frequently used measuring device at our shop. :) The dial caliper was just taking over from the vernier 30 years ago when I got started as a machinist. Nowadays though, the digital caliper is king.

A picture I found on the web that shows all three: :)

-
Nice haul Tony. I never find saks either. I do find plenty of Sheffield pen knives and footprints are fairly plentiful too but as I live and car boot in Sheffield you would kind of expect that.
Jut 2 things of note for me today.
The first is a small Richards pen knife which I have modified as my 6 year old wants to be like dad and carry a MT (I am so proud).
Second was a very small set of footprints. As you can see they are noticeably smaller that the 698s I got earlier. They also have interesting branding as the top bit has the standard footprint logo but the bottom half is Thomas R Ellin Sheffield. Both halves show pat applies for too. Thomas R Ellin was the founder of footprint, so coupled with the pat pending I think these may be an early set. What's your thoughts?


-
Ooooh, a vernier caliper! :) Does it have a name brand on it Tony? :)
Only Draper which is a fairly cheap make over here Bob

(made in spain I have just discovered)Calipers are (by far!) the most frequently used measuring device at our shop. :) The dial caliper was just taking over from the vernier 30 years ago when I got started as a machinist. Nowadays though, the digital caliper is king.

A picture I found on the web that shows all three: :)

Thanks Bob,
(not a micrometer then :-[ )
I'm hopping that when these are clean and oiled they will help me in my 'workshop'
-
Cheers Tony. :) I'd love to see a better picture of them* when you get a moment. :)
*calipers must be like pliers - their name is plural even when there is only one of them
:D :D -
@Farmman said:
Nice haul Tony. I never find saks either. I do find plenty of Sheffield pen knives and footprints are fairly plentiful too but as I live and car boot in Sheffield you would kind of expect that.Jut 2 things of note for me today.
The first is a small Richards pen knife which I have modified as my 6 year old wants to be like dad and carry a MT (I am so proud).
Second was a very small set of footprints. As you can see they are noticeably smaller that the 698s I got earlier. They also have interesting branding as the top bit has the standard footprint logo but the bottom half is Thomas R Ellin Sheffield. Both halves show pat applies for too. Thomas R Ellin was the founder of footprint, so coupled with the pat pending I think these may be an early set. What's your thoughts?


Both of yours look very early to me
Here are some differences in my Footprints
My earliest '9inch' pair have footprint on both pieces but the small ones have (I think) just numbers on the top jaw
Later models have the size in imperial and metric (not sure if they only had imperial at some stage :-\ )
The two on the left are my oldest
A You can see the bottom jaw has a triangle shape
B Newer jaws are square
C the newer ones top jaw is a wider, looks like an upside down T in shape


I got too much time on my hands ::)
By the way have you shortened that pen knife to make it safer?
-
@sparky415 said:
@Paul,
Did you want that Ax head? Its 7 ½ x 4 ¼ , too big?@Gareth,
I nearly missed them, I was looking in a box of rusty tools as the owner was showing a guy some slippys (nothing that appealed to me)I said thanks and as I was turning to go the first guy opens a box full of stuff, a bit of red caught my eye (as he was looking through I'm thinking don't take the SAK's Don't take the SAK's >:D )
He left and I dived in, I should have picked up a few other bits he had ::)

2nd (waiter?) and 3rd down on the left have the split corkscrews
Middle right is a Wenger
Bottom right sneaked in when I wasn't looking, made by 'stainless steel'
Bottom is ''stainless steel Japan' and has 'Richard Cowling' scratched on the back of one of the springs :D
The cork screw is broken off and the spring for the scissors is missing
thanks for the offer mate but you keep hold of it , im after a small axe for camping trips, one with a short curved handle, thanks again for the offer tony

-
Yes Tony I did shorten/ round the knife blade. It only cost £1.25 so no really loss. Already got use out of it and my boy. He is busy using the bottle opener at a BBQ.
-
@Farmman said:
Yes Tony I did shorten/ round the knife blade. It only cost £1.25 so no really loss. Already got use out of it and my boy. He is busy using the bottle opener at a BBQ.I very much like the idea of modifying a tool to make it more personal

I'm sure its already one of his most treasured possessions :) -
Nice finds Tony...
Maybe I should start stopping at Car boots.. 
-
The whole thing looks like way too much fun.
Some day (hopefully in the not too distant future) my wife and I are going to spend a few weeks in Europe. Between now and then I need to come up with a good answer to: "Why are we spending £50 to mail all those junky old tools home?"

-
:D
-
Treasured possession, yes, I had to remove it from his pillow last night and this morning he insisted on having it with him right up to going to school.
-
That's nice Farmman, sounds like me when I was little

I still have the first SAK that my Mum an Dad gave me :)
I have just looked them up on SAK Wiki

On the left,
Two Waiters one with Grooved corkscrew
Gourmet
Pocket Pal
Classic SDOn the right,
Tourist
And a Wenger Commander
-
What plans do you have for those SAKs Tony
:D :D.
You going to dress them up or torture them with a drill press
:D :D :D -
Not sure yet but things to think about :)
-
Another good haul Tony.
I go to car boot sales almost every week during the summer and I normally manage to find only one or two genuine SAks every year :(
So far this year just a Classic.
-
As you can probably guess I was very please (and a bit broke) with Sundays haul

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login