Not feeling the Pulse ...
-
Yea, out with it! :ahhh
-
Easy fellers, alcohol has delayed broadcast and assessment is underway. Our transmission will resume promptly! :D besides, I'm killing time till the PST II shows up

-
Well it’s here ...



... and to be honest, I’m undecided.
There’s some things I like about it, and some I don’t. What impressed me most I think is the fact that this is pretty much the same size as the Kick, but has so many more functions. OK, the Kick has beefier pliers and longer drivers – but the Pulse adds scissors and “that file” in the same sized package. (I did then notice the Spirit wasn’t much bigger for all that offers). It’s also a very good looking tool


As MM said before, the size does make it very pocketable – I was expecting something much bigger. Here it is alongside the Kick, Sideclip, Kick, PPP & Spirit. I’ve carried the PPP on a suspension clip quite a bit and not found it intrusive so I can definitely see the appeal for pocket carry




The previous owner has done a cracking job of tidying this tool up after the owner before him let it get in a real state, that said there’s still just enough character and signs of life as a tool to make sure this is a user without feeling like you've just sneezed on the Mona Lisa.




Here’s my initial and abrupt thoughts: Size excellent, clumptastically tedious, frustrating locks, fantastic file, knife just fine, looks 8), no awl, drivers adequate (I do like to see tools doubled up though), scissors small but usable, and a nice moderate duty pliers
My main (personal) problem with this tool is deciding where it fits. Nothing beats my Wave for work, and it’s not going to evict my Swisstool CS plus from my backpack (or Spirit on lighter days). The car tool will (eventually) be a Powerlock (but might be raiding it for parts first) and general light duty (and legal) carry would go to Kick, PPP or Sideclip. That said, the last three all have a serious scissor deficiency (hence why I have a PST II on the way), and if the Pulse was knifeless it would overcome the legality issue.
Being rare, shiny, collectable or otherwise desirable holds no real appeal to me if I can’t put it to work. It’s either a tool I’m going to use, or a tool I’m going to lose. I really think it needs more pocket time to know whether or not this will have a long term place in my lineup
-
Nice thoughts mate and I agree with a lot of it. I will say though that the locks are definitely something you'll get used to if you give them a chance. I know I was very wary of them when I first got my Pulse but now they are absolutely second nature and a breeze to open. :)
-
Ahem. A Pulse is on my wanted list soo .... if you don't like it ? :D
Having said that I do hope you like it and keep it. -
I can see the appeal due to the Pulse's the 6oz weight and tool compliment. It has two more tools than the current Fuse but is the same weight. And the Pulse has rolled edges rather than a cheapo plastic handle liner. The rocking locking mechanism and clumping can be frustrating, or you can just embrace the retro.
For those who like them, I can see the appeal. But there are MTs out there that can do it better than the Pulse. It all depends on what you want & like. To each his own. :)
-
@Gareth said:
Nice thoughts mate and I agree with a lot of it. I will say though that the locks are definitely something you'll get used to if you give them a chance. I know I was very wary of them when I first got my Pulse but now they are absolutely second nature and a breeze to open. :)Cheers mate, I'll give it a chance for sure.
@Magic Bus said:
Ahem. A Pulse is on my wanted list soo .... if you don't like it ? :D
Having said that I do hope you like it and keep it.I might be a good while making my mind up, so if you're after one quick I wouldn't wait for this one :D :D :D
Nearly took it for a spin earlier. Had to break a wardrobe down, and went for the Pulse to undo the screws etc ... only to find out it needed an Allen key :( . Swisstool CS Plus to the rescue ::)
-
@50ft-trad said:
Nice thoughts mate and I agree with a lot of it. I will say though that the locks are definitely something you'll get used to if you give them a chance. I know I was very wary of them when I first got my Pulse but now they are absolutely second nature and a breeze to open. :)
Cheers mate, I'll give it a chance for sure.
@Magic Bus said:
Ahem. A Pulse is on my wanted list soo .... if you don't like it ? :D
Having said that I do hope you like it and keep it.I might be a good while making my mind up, so if you're after one quick I wouldn't wait for this one :D :D :D
Nearly took it for a spin earlier. Had to break a wardrobe down, and went for the Pulse to undo the screws etc ... only to find out it needed an Allen key :( . Swisstool CS Plus to the rescue ::)
LOL I'm as patient as water wearing rock down >:D :D
-
@shamus said:
...And the Pulse has rolled edges rather than a cheapo plastic handle liner...I don't know if "cheapo" is the right word to use when talking about the lightweight thermoplastic polyamide material used in many Benchmade's, Leatherman's, Gerber's, SARGE Knives, Cold Steel's, CRKT's, Kershaw's, and SOG Knives, to name a few. Not to mention that it is the frame material used in many of today's most popular handguns, and long gun stocks.
Just saying...
-
@shamus said:
...And the Pulse has rolled edges rather than a cheapo plastic handle liner...
I don't know if "cheapo" is the right word to use when talking about the lightweight thermoplastic polyamide material used in many Benchmade's, Leatherman's, Gerber's, SARGE Knives, Cold Steel's, CRKT's, Kershaw's, and SOG Knives, to name a few. Not to mention that it is the frame material used in many of today's most popular handguns, and long gun stocks.
Just saying...
I was actually waiting for your comment... ;) :D
-
"lightweight thermoplastic polyamide material!"
Plastic!
"lightweight thermoplastic polyamide material!"
Plastic!
:DOh, I know about the properties of the material. I won't knock it's uses, but I don't prefer it for MTs.
-
@shamus said:
Oh, I know about the properties of the material. I won't knock it's uses, but I don't prefer it for MTs.Understood, everyone has their preferences, their likes and dislikes.
Just wanted to point out that "cheapo" wasn't the right word for an incredibly strong, industry proven, abrasion and impact resistant material with excellent retention of mechanical properties when exposed to heat, chemicals and moisture. Also it has excellent surface appearance, as well as improved wear and friction over natural ores.
But like you said, you know the properties of the material
:D -
I am torn by the Zytel usage. On the one hand, it makes the tool about 30% thicker than it needs to be, on the other hand it makes it REALLY comfortable to use. As with all things multi, it's about compromise. You don't have to like it, there are a million other models out there.
If you guys want to argue, at least make it about something worthwhile and start slamming Gerbers or something! :D

-
@Mercury said:
I am torn by the Zytel usage. On the one hand, it makes the tool about 30% thicker than it needs to be, on the other hand it makes it REALLY comfortable to use. As with all things multi, it's about compromise. You don't have to like it, there are a million other models out there.If you guys want to argue, at least make it about something worthwhile and start slamming Gerbers or something! :D

Oi!

:D :D
-
I am torn by the Zytel usage. On the one hand, it makes the tool about 30% thicker than it needs to be, on the other hand it makes it REALLY comfortable to use. As with all things multi, it's about compromise. You don't have to like it, there are a million other models out there.
If you guys want to argue, at least make it about something worthwhile and start slamming Gerbers or something! :D

Oi!

:D :D
Did someone say Radius?
:D :D -
I am torn by the Zytel usage. On the one hand, it makes the tool about 30% thicker than it needs to be, on the other hand it makes it REALLY comfortable to use. As with all things multi, it's about compromise. You don't have to like it, there are a million other models out there.
If you guys want to argue, at least make it about something worthwhile and start slamming Gerbers or something! :D

Oi!

:D :D
Geeerberade....No! OHO! (blades, that is!)
-
@Mercury said:
I am torn by the Zytel usage. On the one hand, it makes the tool about 30% thicker than it needs to be, on the other hand it makes it REALLY comfortable to use. As with all things multi, it's about compromise. You don't have to like it, there are a million other models out there.If you guys want to argue, at least make it about something worthwhile and start slamming Gerbers or something! :D

Slamming Gerbers = Gerber tequila shots?

+

-
I'm always surprised at the amount of zytel hate here. Has anyone here actually had it fail or perform in a substandard manner?
-
Just wanted to point out that "cheapo" wasn't the right word for an incredibly strong, industry proven, abrasion and impact resistant material with excellent retention of mechanical properties when exposed to heat, chemicals and moisture
Agreed, and my use of "cheapo" is withdrawn. ;) My objection to it is that it makes an MT wider than needs be. And a few chemicals and cleaners can damage it... and certain types pf polymers will absorb moisture (so don't go throwing those zytel MTs in the dishwasher). . I'd rather my MTs be made of just one material (steel) since it narrows down my list of maintenance concerns. But that's a just me.
I am torn by the Zytel usage. On the one hand, it makes the tool about 30% thicker than it needs to be, on the other hand it makes it REALLY comfortable to use. As with all things multi, it's about compromise.
No need to compromise. IMHO, the better designed MTs are comfortable to use without zytel.The Swisstool Spirit and the Leatherman Wave are two good examples.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

