Not feeling the Pulse ...
-
"lightweight thermoplastic polyamide material!"
Plastic!
"lightweight thermoplastic polyamide material!"
Plastic!
:DOh, I know about the properties of the material. I won't knock it's uses, but I don't prefer it for MTs.
-
@shamus said:
Oh, I know about the properties of the material. I won't knock it's uses, but I don't prefer it for MTs.Understood, everyone has their preferences, their likes and dislikes.
Just wanted to point out that "cheapo" wasn't the right word for an incredibly strong, industry proven, abrasion and impact resistant material with excellent retention of mechanical properties when exposed to heat, chemicals and moisture. Also it has excellent surface appearance, as well as improved wear and friction over natural ores.
But like you said, you know the properties of the material
:D -
I am torn by the Zytel usage. On the one hand, it makes the tool about 30% thicker than it needs to be, on the other hand it makes it REALLY comfortable to use. As with all things multi, it's about compromise. You don't have to like it, there are a million other models out there.
If you guys want to argue, at least make it about something worthwhile and start slamming Gerbers or something! :D

-
@Mercury said:
I am torn by the Zytel usage. On the one hand, it makes the tool about 30% thicker than it needs to be, on the other hand it makes it REALLY comfortable to use. As with all things multi, it's about compromise. You don't have to like it, there are a million other models out there.If you guys want to argue, at least make it about something worthwhile and start slamming Gerbers or something! :D

Oi!

:D :D
-
I am torn by the Zytel usage. On the one hand, it makes the tool about 30% thicker than it needs to be, on the other hand it makes it REALLY comfortable to use. As with all things multi, it's about compromise. You don't have to like it, there are a million other models out there.
If you guys want to argue, at least make it about something worthwhile and start slamming Gerbers or something! :D

Oi!

:D :D
Did someone say Radius?
:D :D -
I am torn by the Zytel usage. On the one hand, it makes the tool about 30% thicker than it needs to be, on the other hand it makes it REALLY comfortable to use. As with all things multi, it's about compromise. You don't have to like it, there are a million other models out there.
If you guys want to argue, at least make it about something worthwhile and start slamming Gerbers or something! :D

Oi!

:D :D
Geeerberade....No! OHO! (blades, that is!)
-
@Mercury said:
I am torn by the Zytel usage. On the one hand, it makes the tool about 30% thicker than it needs to be, on the other hand it makes it REALLY comfortable to use. As with all things multi, it's about compromise. You don't have to like it, there are a million other models out there.If you guys want to argue, at least make it about something worthwhile and start slamming Gerbers or something! :D

Slamming Gerbers = Gerber tequila shots?

+

-
I'm always surprised at the amount of zytel hate here. Has anyone here actually had it fail or perform in a substandard manner?
-
Just wanted to point out that "cheapo" wasn't the right word for an incredibly strong, industry proven, abrasion and impact resistant material with excellent retention of mechanical properties when exposed to heat, chemicals and moisture
Agreed, and my use of "cheapo" is withdrawn. ;) My objection to it is that it makes an MT wider than needs be. And a few chemicals and cleaners can damage it... and certain types pf polymers will absorb moisture (so don't go throwing those zytel MTs in the dishwasher). . I'd rather my MTs be made of just one material (steel) since it narrows down my list of maintenance concerns. But that's a just me.
I am torn by the Zytel usage. On the one hand, it makes the tool about 30% thicker than it needs to be, on the other hand it makes it REALLY comfortable to use. As with all things multi, it's about compromise.
No need to compromise. IMHO, the better designed MTs are comfortable to use without zytel.The Swisstool Spirit and the Leatherman Wave are two good examples.
-
To each his own as I always say. The wave is a fantastic tool, but I like dedicated drivers. The Swisstools are great, but I like a sharper nosed plier and drivers that bite a bit more. I carry a blast that has both dedicated grippy-er drivers and sharper pliers, but I have to deal with the thickness of the zytel. See? Compromise.
-
:ahhh :ahhh what happened? I only nipped out to see my Brother for a couple of hours :P
Well the Kick is my first Zytel adourned MT, and yes I'd have liked to see more functions sandwiched into a Kick, but rolled edges loses working space too. I've no problems with the material's looks, feel or durability record. Anything that makes a tool better to use is a plus in my book

Let's face it, LM could have made the phillips slimmer, tweaked the other tools around and put more functions in the same working space - but then it wouldn't have been an entry level tool
The Kick has one less tool than a Sideclip in a much wider package ... but it feels like you can use it harder and is comfortable to use the pliers. You pay your money, you take your choice. Same applies with inboard/outboard tools, leather/nylon sheaths, high edge retention/ease of sharpening etc etcExample
One of the issues I personally have with the Pulse's locking mech is I'm far more used to things NOT locking at all :) It's one thing forgetting that the sodding thing locks and having to release it, it's another then thinking "Oh bugger it's not one of those locks it's one of these locks". I'm just getting used to the Vic's and the Wave locking (always have to stop and think with the Gerber 600 for some reason) and now I've got another chuffin lock to get my head around :D :D :D
Life was so much easier when you knew you had to use a knife properly or your fingers would fall off :P :D :D :D
-
@shamus said:
Agreed, and my use of "cheapo" is withdrawn. ;):D
My objection to it is that it makes an MT wider than needs be.
Point taken. But I have also found the combination of a thin layer of steel, sandwiched with the proper amount of Zytel, gives much more strength, and rigidity than a greater amount of steel alone (that is, not an equal amount). A good example is the ST300, while the steel in the ST300 handles is markedly thicker than that of the Core, I find that I can make an ST300 handle flex slightly with heavy finger pressure, whereas with the Core I can not generate enough finger pressure to flex the handle. It ends up being a careful balancing act between the three main factors: Size; Strength; Weight
And a few chemicals and cleaners can damage it...
Very true
and certain types pf polymers will absorb moisture (so don't go throwing those zytel MTs in the dishwasher)
I have found this not to be true with the Zytel formula Leatherman uses in their tools and knives. It seems that they have made sure that the composition they chose is extremely non hygroscopic. This makes sense, considering all the sweaty hands that would be handling them...
Well, anyway
(hopefully :D) -
@50ft-trad said:
"Oh bugger it's not one of those locks it's one of these locks". I'm just getting used to the Vic's and the Wave locking (always have to stop and think with the Gerber 600 for some reason) and now I've got another chuffin lock to get my head around :D :D :DWhat is really bothersome is when you get so use to the locks, that you find yourself looking for the lock on a slip joint for a few seconds before you realize... :-[
-
@50ft-trad said:
"Oh bugger it's not one of those locks it's one of these locks". I'm just getting used to the Vic's and the Wave locking (always have to stop and think with the Gerber 600 for some reason) and now I've got another chuffin lock to get my head around :D :D :D
What is really bothersome is when you get so use to the locks, that you find yourself looking for the lock on a slip joint for a few seconds before you realize... :-[
I doubt that'll happen mate :DSlippies and SAK's are my mainstay, and through choice rather than legal requirement. The only time I prefer a lock is on a driver or awl (and even then I'm quite comfortable without on well made tools) but my most used tools are probably knife blade and scissors which is why I tend to always have a SAK or dedicated (non-locking) folder on me, even if I've got a pliers based tool which has the same functions.
This is why I had to get a Kick before they started getting scarce, why I wanted to try a Sideclip and PST II, and probably why the PPP has been riding in my pocket so often of late AND why I MIGHT (undecided again - too early yet) look into a knifeless Pulse option. I need to put it through some evening/weekend carry to see if it draws me in, or indeed steers me towards a few tweaks.
-
Thing is, you can fit more in the Kick frame it's just that LM didn't.

I still think LM missed a trick by not offering more variations, why not offer a Kick with scissors and saw? Or a file? Or a bit driver? It's only and expansion on what they did with the PST and the PST II, same frame but with variations on the tool options.
-
@Gareth said:
I still think LM missed a trick by not offering more variations, why not offer a Kick with scissors and saw? Or a file? Or a bit driver? It's only and expansion on what they did with the PST and the PST II, same frame but with variations on the tool options.I've thought about this too. With a well designed, inside opening tool, locks are really just a backup safety feature.
Perhaps it's just a money thing. It seems that with the Swiss tools/knives so entrenched in the recent history of the UK and Europe (it's hard to guess, what with Leatherman not disclosing any actual sales figures, but I'm estimating at least a 10 to 1 advantage for the Swiss) that it's an uphill battle for Leatherman to get enough market share. At least enough to encourage them to put a greater number of UK friendly tools on the market.
Just a thought...
-
@Gareth said:
Thing is, you can fit more in the Kick frame it's just that LM didn't.
I still think LM missed a trick by not offering more variations, why not offer a Kick with scissors and saw? Or a file? Or a bit driver? It's only and expansion on what they did with the PST and the PST II, same frame but with variations on the tool options.
Nice setup !! To be perfectly honest, that's really why I've got a PST II coming - yes I want to try it as is, but I also want to see if I can put together something that gives me a diverse range of non locking tools in a comfortable handle. A Kick frame with diamond file, big scissors and an awl would be VERY nice if it'd work

In fact while I think on (another side track and deviation from the norm), although I carry a dedicated folder I do like having an **alternate **blade in my MT's sometimes, which is why the CE blade is stopping in my PPP & Gerber 600, and I might even pop the CE blade from the PST II in the Kick frame too. That said I do like having the plain edged tools in my Swisstool & Spirit
I just like having different tools for different jobs in different places.There is no perfect multitool for me - just the perfect combination of multitools :D :D :D
@50ft-trad said:
This is why I had to get a Kick before they started getting scarce, ... I need to put it through some evening/weekend carry to see if it draws me in, or indeed steers me towards a few tweaks.
I'm thinking that you need a black oxide one too, just to make sure
:D :DWouldn't look so good with a mix of shiny PST II parts though :P
-
Man I love the modded kick Gareth!
-
many more to be seen here:
/topic/17910
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
