FS: Paracord lanyards, neck lanyards, monkeys fists, zippers and shockcord.!
-
Hi all
Still a bit of a newbie here, but please check out my recent post to get an insight into me.
Been making custom paracord lanyards for a while now and people seemed to like them so I started selling them. Made up a number of them for Calvin who gave them away on one of the forum give-aways.
Everything I make is custom made to your requirements and specifications, the paracord colour, the stitch, the attachments, everything.!
I have set up three blogs that show my handy work, see my signature:
- Paracord lanyards (lanyards, monkeys fists, key fobs, tool tags & zipper pullers)
- Paracord bracelets and neck lanyards
- Shockcord lanyards (stretch paracord)
Here is an example of my work.
<u>Lanyards</u>
Cobra & king cobra stitch

Square stitch

Round stitch

Long snake lanyards

<u>Neck lanyards (available in any sticth: cobra, snake, round or square)</u>
Round stitch

Snake and cobra

<u>Monkeys fist (wooden or steel balls)</u>

<u>Tool tag & key fobs</u>

<u>Zipper pullers</u>

<u>Shockcord</u>
1/8th inch

3/16th inch

<u>Prices</u>
All my work is custom made to your specs, so the prices can vary depending on your needs. However as a guide here are some prices:
Lanyards: about £5 - £10 (depends on the length and the clip used) + postage
Long Snake lanyards: between £10 - to whatever (I have made these to 110cm.... ) + postage
Neck lanyards: £6.50 (supplied with breakaway, cord lock and lobster clip) + postage
Zip pullers: £2.50 + postage
Monkey fist: about £5 - £10 (depends if its a wooden or steel ball and also the clip used) + postage
Bracelets: cobra £6.50, king cobra £12 + postage
Shochcord: £4 - £7 (depends on the clip used) + postagePostage is always at cost, individual items usually £1 in Europe and $4 to the states, but this obviously depends on the amount you order. It is always at cost.
<u>Paracord</u>
The cord I am using is genuine US military issue 7 strand kernmantle style 550 cord that conforming to MIL-C-5040 Type III. Its called 550 as the breaking strain is 550lbs. I have a good selection of colours:

Top row (military colours)
- Coyote brown
- Olive drab
- Coyote tan
- Foliage green
- Black
- Grey
- ACU digital (the US combat clothing)
Middle row (standard colours)
- Silver
- Navy blue
- Purple
- Royal blue
- White
Bottom row (standard colours)
- Burnt orange
- Yellow
- International safety Orange
- Red
- Burgundy
<u>Clips and snaps</u>
The clips on the top row are pukker clips, they are all rated AISI 316 steel. AISI is the American Iron and Steel Institute. 316 steel used for surgical uses and has the addition of molybdenum that prevents specific forms of corrosion. This is also known as "marine grade" stainless steel due to its increased ability to resist salsmurfer corrosion.
The clips on the lowe row are not 316 steel, they are more of an alloy.
Top row (all AISI rated type 316 steel)
- Large clip
- Medium gate snap
- Small gate snap
- Small McGizmo clip
Bottom row(all swivel clips)
- Small clip
- Lobster clip
- Trigger clip

Top row (all AISI rated type 316 steel)
- Large shackle (6mm)
- Small shackle (5mm)
- Solid ring (3/8 thickness x 3/4 diameter)
Bottom row (all split rings)
- 1 inch steel with nickel plating
- 3/4 inch steel with nickel plating
- 1/2 inch steel with nickel plating
- Size 5 (about 1/4 inch) steel
Should you be interested in anyone of these designs or have an idea that you would like me to create, please feel free to contact me at this email address:
Thanks
deano -
Some beautiful work there!
Def
-
Very nice.
I am lucky enough to have a couple of pieces that Deano has done and they are great. :)
-
Great work there mate :)
-
Could you possibly measure these areas on the shackles?

For what I want it for the shackle pin would have to be 3mm in diameter, at least 10mm long (inside the "U" ends) and the "U" would have to be about 6mm deep.
This is what I could come up with myself... I clearly need something better :P

-
@Levi said:
Could you possibly measure these areas on the shackles?Hi
The shackle shown is a 5mm shackle. The 5mm refers to the diameter of the pin. Although shackles come in various sizes they do not come less than 4mm, which means that the shackle system would not be helpful for your lanyard/knife set up.
The split ring you have there, does not seem the best quality, as you can see from the stretch.
I will PM you later a few options for your lanyard ok.
Thanks
deano -
The smallest shackle I've seen (or at least remember) is 4mm or 5/32"
I'm wondering if you might be able to get a 3mm Clevis Pin?
-
Hi all
I now have some neon colours:
- Orange (International orange)
- Green (Toxic green)
- Yellow (Dazzle yellow)

...takes me back to the 80s.! :D
Feel free to contact me should you want anything made up.

Thanks
deano -
Nice looking work there sir! 8)
For some reason those yellow ones really strike my fancy.
-
see, even S&M folks like your work Deano! I tell everybody about you bro

-
@WhichDawg said:
see, even S&M folks like your work Deano! I tell everybody about you bro
Uh-oh, my secrets out! :o
-
the whipping boss! :ahhh
-
Hi all
Great comments :D :D
Been quite busy lately: job, family etc etc, but did decide to try these funky neon colours. I had the Int Orange, but wanted to see what the yellow and green looked like.
I made up these ones just in the neon colour, and whilst good, I actually prefer the colours mixed with black.

...just seen to loose a bit of there punch.!
I expect grey would be another nice colour the neon colours would go with.
Thanks
deano -
see, even S&M folks like your work Deano! I tell everybody about you bro :cheers:
Uh-oh, my secrets out! :o
Hi all
Lets not joke here, I recently purchased a few items from "painfulpleasures.com"
http://www.painfulpleasures.com/xcart/customer/product.php?productid=2093#tab
...however it was lanyard related >:D
Thanks
deano -
"Tired of losing your O-Rings?" ain't it the truth!
-
@WhichDawg said:
"Tired of losing your O-Rings?" ain't it the truth!I've been asked alot about the Glow in the dark stuff and found these people to be the cheapest by faaaaaaaaaarrrrrrrrr.
Best thing is everything is delivered in a discreet package :o
The GITD o rings look the business on flashlights and lanyards.
Thanks
deano -
sure sure Deano, honest we believe you!

-
Hi all
Bracelets available for the summer.!
Cobra with a bead+loop or a shackle


King cobra with a bead+loop or shackle:


<u>Prices</u>
$13 for a cobra
$24 for a king cobra
...postage is $4 anywhere in the world.Thanks
deano -
Excellent work as always. :)
Great prices too.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


