Leatherman MUT Owners Club
-
@Ashley said:
I'm not in the club but wanted to make a statement about the leatherman molle sheath. Worse sheath I have ever had in my life. :ahhh Didn't take me long to sell it and get a maxpedition single sheath. Still not my favorite but its 10 to 1 better then the HORRIBLE Leatherman moille sheath.
its funny but I've noticed that some of the best tools have the worth sheaths. lol
as long as the tool is good I'm happy. Not to picky about sheaths really.
-
@Ashley said:
I'm not in the club but wanted to make a statement about the leatherman molle sheath. Worse sheath I have ever had in my life. :ahhh Didn't take me long to sell it and get a maxpedition single sheath. Still not my favorite but its 10 to 1 better then the HORRIBLE Leatherman moille sheath.
What didn't you like about it?
-
Glad you have the BO MUT, shame it retired your Charge. I too have the PUSH pack, its quite good :-)
Still love my Charge; it has only retired to home use rather a daily carry. Nice to hear someone else with a PUSH pack, find it so useful to pack s**t in; even my three year old likes carrying it although that means the odd rogue Thomas the Tank engine appearing at work!
Yeah the PUSH pack is great, very useful. Well everyone loves Thomas the Tank Engine so I bet your work mates are jealous :)
-
@Ashley said:
I'm not in the club but wanted to make a statement about the leatherman molle sheath. Worse sheath I have ever had in my life. :ahhh Didn't take me long to sell it and get a maxpedition single sheath. Still not my favorite but its 10 to 1 better then the HORRIBLE Leatherman moille sheath.
Shame to hear you didn't get on with the molle sheath. I need to try one for myself. Can you carry it horizontally?
-
Cannot understand why the MOLLE sheath is the worst sheath ever. I cannot see anything inherently wrong with it.
It has a good secure snap, fits nicely on a riggers belt or a RICAS if I am shooting. It holds the MUT securely although a little tight with the pocket clip fitted. The wrench tool fits snugly in the snap strap though it is not something I carry everyday.
I have added the bit carrier from my Charge and the sheath has plenty of room to hold it. I haven't tried carrying it horizontally but it is possible. All over it is not too bulky and, as said before, fits nicely in the side pocket of my PUSH.
The cordura is good quality, well stitched and appears to be hard-wearing, although only time will tell on the latter. The flap has a good amount of Velcro which seals the unit securely even when worn upside down.

-
I like the MUT Molle sheath , well made , works OK . I usually throw multi sheaths over my left shoulder , and either make my own or use mag. pouches .
I also use the MUT sheath to carry a large folder and a diamond hone . I have the tan and will prolly also order the black one .
Chris
-
@D0C08 said:
Cannot understand why the MOLLE sheath is the worst sheath ever. I cannot see anything inherently wrong with it.It has a good secure snap, fits nicely on a riggers belt or a RICAS if I am shooting. It holds the MUT securely although a little tight with the pocket clip fitted. The wrench tool fits snugly in the snap strap though it is not something I carry everyday.
I have added the bit carrier from my Charge and the sheath has plenty of room to hold it. I haven't tried carrying it horizontally but it is possible. All over it is not too bulky and, as said before, fits nicely in the side pocket of my PUSH.
The cordura is good quality, well stitched and appears to be hard-wearing, although only time will tell on the latter. The flap has a good amount of Velcro which seals the unit securely even when worn upside down.

Thanks for the info my friend, sounds like the Molle sheath works well for you. :)
-
@Styerman said:
I like the MUT Molle sheath , well made , works OK . I usually throw multi sheaths over my left shoulder , and either make my own or use mag. pouches .I also use the MUT sheath to carry a large folder and a diamond hone . I have the tan and will prolly also order the black one .
Chris
Hey Chris, thanks for the information on the Molle sheath, sounds like it works well for you. I shall need to try it in the near future
-
I love the look and feel of the mut. But not being a gun owner sort of restricts it's usefulness. If I could swap out the Bolt override tool for scissors I think I would by one.
-
@wytwolf said:
I love the look and feel of the mut. But not being a gun owner sort of restricts it's usefulness. If I could swap out the Bolt override tool for scissors I think I would by one.Well I am the same as you, not a gun owner. But I have found some great uses for the tools. Carbon scraper - Awl, C4 Punch - Marlin spike. I agree though scissors would be a great addition to the MUT.
-
Where are all the MUT owners? C'mon guys I know there are more of you out there
. -
Thanks to MTO(I won a MUT 8) 8)).
My MUT is my yard bitch MT. The hammer is REALLY handy as is the nice & big blade/saw 8) 8) 8).I used my MUT to pull apart a deceased microwave oven , the longer screw driver bits were just the thing 8) ,used the pliers to remove a couple of security torx bolts(saved me a trip to find my security torx bits set 8) 8)). Even used the hammer to tap some parts out :D :D :D.
Now the 'replaceable' ::) ::) ::) carbon scrapper is not like a normal awl I did find out today ::) ::) :D :D. Being bronze I suspect it is not as rigid as a normal MT's awl. As I was using/abusing it I was thinking 'its ok it's replaceable' as a jammed it between 2 riveted pieces of metal. I had the cunning plan to grab a near by brick to whack the hammer end of the MUT with the scrapper in place.Before I grabbed the brick I thought I would make sure the scrapper was holding up OK ::) ::) ::) :o :o :o :o :D :D :D.

:D :D, it be a bit of a wet wonky noodle ::) ::) :D :D :D.Not too worry I had a old Japanese MT set on hand & I used it's hammer to whack the scrapper back into alignment , no harm done :D :D

All good :D :D, just need to give the blade & saw a much needed clean + sharpen the blade.
I do prefer the ease of sharpening a PE blade though :-\ :-\ . -
I really wish Leatherman would make a steel iteration of the carbon scraper , it would be great for hole making and abusive cutting . I have thought about getting a millwright/machinest type to make me one .
Chris
-
I agree.
I got the MUT a few weeks ago as well, and as I'm not a gun owner either I don't quite dare to use the bronze scraper. A harder version as an awl would have been great.
What I particularly like about the tool and what intrigued me the most was not only the great looks :) but also the replaceable wire cutters, the replaceable cutting hook (love the cutting hook on the Charge TTi as well!) and - first and foremost! - of course the hammer.
Additionally, it is the heaviest multitool I have owned so far (being my third, actually), and it gives a very heavy duty and reliable impression.
Oh, and I have the MUT, not the MUT EOD. I thought the non-EOD version was a better fit for me, and so far I haven't been proven wrong yet :)
-
I got the MUT a few weeks ago as well, and as I'm not a gun owner either I don't quite dare to use the bronze scraper. A harder version as an awl would have been great.
What I particularly like about the tool and what intrigued me the most was not only the great looks :) but also the replaceable wire cutters, the replaceable cutting hook (love the cutting hook on the Charge TTi as well!) and - first and foremost! - of course the hammer.
Additionally, it is the heaviest multitool I have owned so far (being my third, actually), and it gives a very heavy duty and reliable impression.
Oh, and I have the MUT, not the MUT EOD. I thought the non-EOD version was a better fit for me, and so far I haven't been proven wrong yet :)
whats the difference between the 2?
-
Leatherman MUT (official Leatherman website)
Leatherman MUT EOD (official Leatherman website)Basically on the MUT EOD you get replaceable fuse-wire cutters (straight blades) instead of replaceable wire & hard wire cutters (mostly straight blades but a little wider towards the bottom for the harder wires), a C4 punch (quite big in diameter with a pointed tip) instead of a firearm disassembly punch (rather small in diameter, flat tip) and instead of the plier-part with the big zig-zagged, rounded belly you get military performance spec cap crimpers (which I absolutely have no use for).
Except for the cap crimpers on the plier head everything should be replaceable with the counter-parts of the other tool, but I don't see any need for that myself :)
-
I get along okay with the bronze scraper as an awl, but I haven't found anything truly useful to do with the pin punch.

If anything, I'd like to see them replace that first. :-\
-
Bob, why don't you trim the edge to a sharp point on that pin punch. That would be a lot more useful I would think.
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login