Leatherman MUT Owners Club
-
Thanks to MTO(I won a MUT 8) 8)).
My MUT is my yard bitch MT. The hammer is REALLY handy as is the nice & big blade/saw 8) 8) 8).I used my MUT to pull apart a deceased microwave oven , the longer screw driver bits were just the thing 8) ,used the pliers to remove a couple of security torx bolts(saved me a trip to find my security torx bits set 8) 8)). Even used the hammer to tap some parts out :D :D :D.
Now the 'replaceable' ::) ::) ::) carbon scrapper is not like a normal awl I did find out today ::) ::) :D :D. Being bronze I suspect it is not as rigid as a normal MT's awl. As I was using/abusing it I was thinking 'its ok it's replaceable' as a jammed it between 2 riveted pieces of metal. I had the cunning plan to grab a near by brick to whack the hammer end of the MUT with the scrapper in place.Before I grabbed the brick I thought I would make sure the scrapper was holding up OK ::) ::) ::) :o :o :o :o :D :D :D.

:D :D, it be a bit of a wet wonky noodle ::) ::) :D :D :D.Not too worry I had a old Japanese MT set on hand & I used it's hammer to whack the scrapper back into alignment , no harm done :D :D

All good :D :D, just need to give the blade & saw a much needed clean + sharpen the blade.
I do prefer the ease of sharpening a PE blade though :-\ :-\ . -
I really wish Leatherman would make a steel iteration of the carbon scraper , it would be great for hole making and abusive cutting . I have thought about getting a millwright/machinest type to make me one .
Chris
-
I agree.
I got the MUT a few weeks ago as well, and as I'm not a gun owner either I don't quite dare to use the bronze scraper. A harder version as an awl would have been great.
What I particularly like about the tool and what intrigued me the most was not only the great looks :) but also the replaceable wire cutters, the replaceable cutting hook (love the cutting hook on the Charge TTi as well!) and - first and foremost! - of course the hammer.
Additionally, it is the heaviest multitool I have owned so far (being my third, actually), and it gives a very heavy duty and reliable impression.
Oh, and I have the MUT, not the MUT EOD. I thought the non-EOD version was a better fit for me, and so far I haven't been proven wrong yet :)
-
I got the MUT a few weeks ago as well, and as I'm not a gun owner either I don't quite dare to use the bronze scraper. A harder version as an awl would have been great.
What I particularly like about the tool and what intrigued me the most was not only the great looks :) but also the replaceable wire cutters, the replaceable cutting hook (love the cutting hook on the Charge TTi as well!) and - first and foremost! - of course the hammer.
Additionally, it is the heaviest multitool I have owned so far (being my third, actually), and it gives a very heavy duty and reliable impression.
Oh, and I have the MUT, not the MUT EOD. I thought the non-EOD version was a better fit for me, and so far I haven't been proven wrong yet :)
whats the difference between the 2?
-
Leatherman MUT (official Leatherman website)
Leatherman MUT EOD (official Leatherman website)Basically on the MUT EOD you get replaceable fuse-wire cutters (straight blades) instead of replaceable wire & hard wire cutters (mostly straight blades but a little wider towards the bottom for the harder wires), a C4 punch (quite big in diameter with a pointed tip) instead of a firearm disassembly punch (rather small in diameter, flat tip) and instead of the plier-part with the big zig-zagged, rounded belly you get military performance spec cap crimpers (which I absolutely have no use for).
Except for the cap crimpers on the plier head everything should be replaceable with the counter-parts of the other tool, but I don't see any need for that myself :)
-
I get along okay with the bronze scraper as an awl, but I haven't found anything truly useful to do with the pin punch.

If anything, I'd like to see them replace that first. :-\
-
Bob, why don't you trim the edge to a sharp point on that pin punch. That would be a lot more useful I would think.
-
-
I get along okay with the bronze scraper as an awl, but I haven't found anything truly useful to do with the pin punch.

If anything, I'd like to see them replace that first. :-\
Seems like a perfect place to install a removable pen...
Ooooh, now that's an idea!

-
A pen would work nicely.
-
IIRC , the pin punch base is just a common garden variety 8-32 thread .
Chris
-
Just a thought (I've not got a MUT or need/desire for one nor have I ever seen one in the flesh) how does the refills for the Exotac nanostriker compare in size and thread for example? A full size MT with saw AND misch metal firesteel would be quite popular with some outdoorsy folk I'd imagine
-
A firesteel is a hell of a good idea , easy to rig . I carry mine on a neck lanyard when in the bush , but a back up never hurts .
Chris
-
Has anyone thought about removing the belt clip?
I for one don't use it at all. I'd rather pocket it completely or use the carabiner.
I just don't know what to do with the holes because you can't just put the screws back in as they would stand out too far.

On the other hand I'd really hate to "modify" my MUT, even if it's such a small thing (which they obviously even intended because they used the normal Torx screws instead of security Torx screws). I always have the feeling that taking something away could make me regret it in the long run ::)
What are your opinions about this?
-
Personally , I like the belt clip - no way you're gonna loose your MUT . Baout a 50/50 wether I carry it in the pouch , or via the clip .
Chris
-
Meh, why not remove the clip for awhile and see how you like it? You can always pop it back on again later. :)

-
I have wondered if the pocket clip gives the hammer a bit of structural support
so I have been happy to leave my one on
. That said LM made it so you could take it off
. I wonder if anyone has broken a MUT hammer yet
:D :D :D -
@keldan said:
I just don't know what to do with the holes because you can't just put the screws back in as they would stand out too far.
I used the extra screws that came with a set of replacement cutters as blanking screws to protect the threads. Same size and sit flush. All of the removable screws on the MUT are interchangeable.
-
Oh, that's very good to know :)
Thanks, bdl931, I'm gonna get me the replacement cutters and try it out
As for the structural support of the hammer - I have wondered that, too, but I think most of the force is transferred and held by the main frame. The belt clip might have a part in this, but only slightly (if even at all).
I have seen a MUT hammer that had the bolt override part (the "point") broken off, but the whole hammer ... well, someone's probably gonna manage to do that :P Haven't seen one of those yet though
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login