ST 300 owners club
-
Welcome to the club roguesw!

-
Thanks J-sews

-
Add me to the ST-300 club.
Glad to be here. -
Yep I'm in too. Had a Wave for a while but kept getting let down by that removable bit set-up. Just no depth to reach a recessed screws and a 3D driver. It has all the tools I need (i can survive without the glasses screw driver :)) Also I found with the Wave if you get it covered in dirt it's hard to get out completely but with the 300 it's Sooo much easier.
I'm not knocking the Wave it's a well made tool. But I just like a good basic, tough no nonsense tool. I just hope they keep making them in some form or another. ;) -
I had to repair the bunkers on our paintball field this past weekend. Unfortunately I forgot my hand saw; the ST300 filled in nicely. It squared off a couple 2x4s nicely.
I have a picture, unfortunately my phone is not sending it over in a timely fashion. If it shows up, I'll post it.
-
Yeah the saw works like magic
Has anyone ever worn the saw out? Or tried to re-sharpen it? Just wondering ??? -
I need to get a look at one :-D
-
@django.cj said:
I had to repair the bunkers on our paintball field this past weekend. Unfortunately I forgot my hand saw; the ST300 filled in nicely. It squared off a couple 2x4s nicely.I have a picture, unfortunately my phone is not sending it over in a timely fashion. If it shows up, I'll post it.
Ah my phone finally cooperated!

-
@joea said:
Yeah the saw works like magic
Has anyone ever worn the saw out? Or tried to re-sharpen it? Just wondering ???I have heard talk of a saw sharpening file
, it would be mighty tough to sharpen the small teeth found on the average MT's saw I would of thought
.I think if you did wear out a saw on a Leatherman they would probably fix it for you
.Best get a couple of MTs & share the wear around
:D :D :DThe wire stripper on my ST300 worked well yesterday 8) 8). I forgot to disconnect my trailer's electrical plug before unhitching it ::) >:( >:( >:(.
-
Yep I was distracted & grumpy when I did it , which lead to grumpy becoming VERY pissed off ::) :D :D. Does not help that "Australian Standards" for trailer wiring seems to be varied & not strictly adhered to >:( >:( >:(.When I did it I thought I bet I am not the only fella to have done that
:D :D. I am as confident as I can be :D :D , that I wont do that again :D :D :DI have all functions normal but no brake lights :ahhh :ahhh. I am going to go have another play with the bloody red wire shortly ::) :D :D.
-
Might be better off getting a multi-meter out. Sounds like a home-wire job :(
-
@joea said:
Might be better off getting a multi-meter out. Sounds like a home-wire job :(It's all good now ,after looking up the 'Australian Standards' on the net & not having any luck with the 'standard' wiring configuration I contacted the crowd who made the trailer & I got the 'correct' info ::) ::) :D :D :D.
-
@MultiMat said:
It's all good now ,after looking up the 'Australian Standards' on the net & not having any luck with the 'standard' wiring configuration I contacted the crowd who made the trailer & I got the 'correct' info ::) ::) :D :D :D.Here in the States, I've found that I usually run into three types on cars and pickup trucks:
-
The 7 pin universal standard (this is becoming more common as most new vehicles are now being produced with the connector as standard equipment)
-
Commercial truck configuration (I see this mostly on vehicles owned by truck drivers)
-
Farm use (only God knows what you'll find when you work on one of these, and they're usually packed with some type of manure :ahhh)
-
-
Seems that I forgot to post this from last year. Better Nate than Lever!
Tim Leatherman hand-signed Super Tool 300

Closer Up view

It's never been used. Sitting here in the small Leatherman MOLLE sheath it came with.
-
Xelkos, that is very very 8) 8) 8) 8) 8)
-
@colinoutdoors said:
Leatherman Super Tool 300This is a video review I did of my ST300 in September 2010
Colinoutdoors
Informative and well laid out video.
Cheers

-
This is a video review I did of my ST300 in September 2010
Colinoutdoors
Informative and well laid out video.
Cheers

Thank you very much Macabee :-)
-
As I have been cosying up to the ST300, I've discovered a few observations:
-
As it's been getting "broken in" I noticed that even though the handles are getting a little easier to flex side to side, and that while I've been putting some force on them as I use the drivers, they still spring back to the parallel/even position. Seems to be good resiliency in the steel, unlike an old Surge that I had, where if you put some heavy turning force on the drivers, it always ended up with a little "twist" in the handles that needed to be straightened.
-
Ran some #8 wood screws into some old dry pine, without any pilot holes, and was pleasantly surprised. While the handles had that initial flex as they overlapped slightly, they stayed in that position during use, and gave a firm, controlled, solid feel.
-
Did some whittling with the plane edge, and it was somewhat of a unusual experience. At the end of the cut, as the blade would leave the wood, you can definitely feel the spring in the steel in the form micro vibrations. It did only take a few minutes of use before getting accustom to it and it became unnoticeable. Wondering though, will the vibrating/shock adsorbing effect increase or decrease hand fatigue... Hmm

-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
