Salt water Multitool
-
So, I have been snorkelling and swimming a lot lately and I was wondering if there are any special Salt water multitools (including Swiss army knives).
The Micra on my key chain has begun to show signs of rust, just from being in my pocket (not in the water, afterwards) and close to salt water, so I know I will need something more purposely designed.
I know that, theoretically, provided you wash it afterwards any SS multitool should work, for some time.
I know that there are several salt water knives, with net cutting implements on them (I have diving knives). Most fishermen just use ordinary knives and scissors, but, this is Multitool.org.
I also think that, of the standard multitools, any swiss army product should be reasonably salt water resistant, though its aluminium parts may suffer.
I have seen some fishing multitools advertised, usually it seems sold by fishing shops like basspro but the impression I got is that these are either cheap, low quality products or just ordinary multitools with a couple of fishing implements on them, like fish scale removers, but no special salt resistant materials.
The multitool I want/need will be exposed to sea water (possibly carried in the sea) sand and lots of heat, and will be rinsed with fresh water and dried afterwards, though this step may be missed on the odd occasion.
Not too heavy.
Not stupidly expensive.
Ability to be carried attached to your leg?
Tool selection?
A decent sized blade and pliers will be a bonus and it should allow some light tasks like screwing, maybe filing etc. to be performed on the beach or even whilst in the sea (I have a full tool set in the car, not too far away, anyway).So, any suggestions for a good quality salt water multitool?
Note: you will not believe what comes up when I post Salt and water joined together...
-
I think the Swisstool Spirit X might be what your looking for.
http://www.swissarmy.com/MultiTools/Pages/Product.aspx?category=swisstool&product=53814&
They are highly corrosion resistant and cost between $65.00-$70.00 -
@EZ822 said:
I think the Swisstool Spirit X might be what your looking for.
http://www.swissarmy.com/MultiTools/Pages/Product.aspx?category=swisstool&product=53814&
They are highly corrosion resistant and cost between $65.00-$70.00I have a swisstool and believe that they are quite salt resistant, like you said. I am, however looking for something more speSmurfpillsed/targeted at salt water.
-
They don't exist, unless you're talking about titanium one piece tools.
-
Many thanks, I had the feeling that it would be quite hard to find such a tool. Plenty of salt water knives, no multitools.
-
Not even a "Fishermen" tools out there are resistant to salt water.
I took my Spirit to the sea quite some times, and cleaned it with fresh water every evening. I did never see the slights bit of rust on it, so I consider it to be the best choice for trips to the sea.
-
Check out Dacor ( a diving gear manufacturer - then bend over an grab your wallet ! ) . another option is to maintain your toys agressivley , or wipe down daily with Marine Tuff Cloth .
Chris
-
Fishermen tools tend to be for lake/river fishermen.
Dacor is now part of Mares. Their site does not have anything apart from knives.
I checked a diving equipment shop a few days ago and I will check another one in the next couple of days.
-
If price is not an option perhaps you could have a custom titanium one made.
-
Sounds like a titanium SAK is what you're looking for. It even has pliers! :D

-
Yes but it has stainless steel parts too. Go ahead and make some tools with titanium. I dare you. :p.
-
Photo by Cam Stanley, taken at the Flower Garden Banks National Marine Sanctuary, depth 80 feet:

-
@tattoosteve99 said:
Yes but it has stainless steel parts too. Go ahead and make some tools with titanium. I dare you. :p.Titanium isn't the best metal for things like blades and screwdrivers that have to stay sharp or go up against other metal items. There are some super expensive beta grades that can get up to RC 52 or so, not really hard enough for a cutting edge. Still, it would make for an awesome safe queen.
The Victorinox stainless is about as stainless as stainless gets but on any salsmurfer specific SAKs I make in the future I'm going to polish the tools to a mirror finish to help keep the rust away. There's other unrustable materials that cut well like H1, Talonite and Stellite 6K that might be worth looking into but nobody would want to pay what I would charge to put something like that together. It'd be cheaper just to buy a new SAK every time one gets to corroded especially since I'd be happy to buy the old one from you at half price for the parts.
Really, if you like the SAK platform then you just need titanium liners instead of the aluminum. I could even set them up to take cellidor scales and they could be replaced as needed although I'm not sure how the brass pins and bushings hold up to the sea. As this is the second time I've heard of the problem of corroding SAK liners I might just be onto something.
-
salsmurfer. What's with all this smurf censorship?
-
Salt water?
-
Auto correct salsmurfer. Stupid auto correct

-
Did it again. Lol. Yes salt water.
-
@bushidomosquito said:
salsmurfer. What's with all this smurf censorship?clicky :D
-
@bushidomosquito said:
salsmurfer. What's with all this smurf censorship?It censors the twt part of saltwter.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login