Recommendation Needed
-
@DocTrooper said:
One last question .... before I take the plunge
Is it possible to add a SAW unto the Explorer ?
Yes. Like Ironraven said, Vic actually made this knife; it's one of three different knives they called a "Woodsman". They're odd, somewhat HTF, and idiot collectors like me tend to pay way too much for them. Not what you want for an EDC.
You can buy an Explorer and make this knife, but since the resulting knife is thicker, you'll have to make all new pins for it. The smart money would buy a Champion Plus (or regular Champion) and remove the fish scaler and metal file. Same result, and you can reuse the Champion pins because you're making the knife smaller. Used Champions can be had on eBay all day long for $15.
-
Just to re-confirm ... the better option is to get the Champion and mod from there, removing tool bits that I do not need.
I have done modding on my old Leatherman and home-made neckers for friends and family members. Tools are basic hand tools. Kinda got me all excited to start modding once more :tool:
Thanks again for all supportive SAK members here for the speedy ...... especially -
Mr Whippy
GraysonK
Sawman
Kirk13
Chako
Reinier
Jmora
Carlos
Ironraven
Multimat
JazzbassThanks again ..... this Forum ROCKS !!!

-
no problem DocTrooper, if you want to get even more excited about mods, check this thread :o:
/topic/5287
-
That's pure EVIL POISON
............ but I like it !!!@Jmora said:
no problem DocTrooper, if you want to get even more excited about mods, check this thread :o:
/topic/5287
-
I have browse through the whole collection of 91mm / 3.5inch
Now ... I know what tools that is frequently used by myself during my travels. They are mainly -
1] Blade
2] Can / Bottle Opener
3] Scissors
4] Corkscrew
5] Toothpick
6] Tweezers
7] Magnifying Glass
8] Wood Saw
9] Metal saw with metal file & nail file
10] Awl
11] LED LightBased on Swiss Champ ... if I strip it down, it would be thinner and only get spare parts with unused parts. However, if I get 2 (two) models, I can mod it and make a Camp SAK and EDC SAK. Appreciate if the experts here would advise on which model , that way , I economize and maximize the mods as well as achieving 2 SAKs instead.
Thanks in advance once again for your inputs, my friends.
p.s. Planning to put Buffulo horns and the other Redwood for the 2 SAKs.
-
Oh, I was just going to let you find the collection of SAKporn on your own. :P Caution, that thread can lead to missed bedtimes and forgotten meals.
I don't know if I'd go all the way to the SwissChamp if you are going to mod this. If you want the light, you'll have to get a philips/light layer from something like the Spartan-Light, and the magnifier/light combo while doable might be a little finicky as there is nothing that currently has that combo. If you do go with that, IIRC you'll probably want a new style magnifier as they are shorter than the older 8x ones. And if memory serves, they never did the LED light inline until they introduced the newer phillips, but if you've never tried one... yeah, check them out. You might decide you want a real flashlight, as I've always found the inline LED rather underwhelming.
-
@ironraven said:
the magnifier/light combo while doable might be a little finicky as there is nothing that currently has that combo.Actually, there is. Check out the Cybertool Lite. They do just this - (new) mag and LED lite in the same layer. The Phillips would be redundant since it's a Cybertool.
DocTrooper - Sounds like now you want a Ranger w/ a LED/mag layer a la the Cybertool Lite. I'd still suggest starting with a Champion Plus (get one with a new mag glass & new metal file) and combine with LED from a Spartan Lite. Final size will be slightly wider than a Champion, so you'll need new pins. Given the size of the final knife here, I doubt you could start with a SwissChamp and reuse the pins... but the time they were drilled and everything, they'd be too short. New pin stock is dirt cheap, so don't let that deter you.
-
face palm You're right, jazzbass- I completely forgot about that, never having seen one in person.
-
@jazzbass said:
Actually, there is. Check out the Cybertool Lite. They do just this - (new) mag and LED lite in the same layer. The Phillips would be redundant since it's a Cybertool.DocTrooper - Sounds like now you want a Ranger w/ a LED/mag layer a la the Cybertool Lite. I'd still suggest starting with a Champion Plus (get one with a new mag glass & new metal file) and combine with LED from a Spartan Lite. Final size will be slightly wider than a Champion, so you'll need new pins. Given the size of the final knife here, I doubt you could start with a SwissChamp and reuse the pins... but the time they were drilled and everything, they'd be too short. New pin stock is dirt cheap, so don't let that deter you.
Jazzbass,
The LED Light and Magnifier is just a bonus. Not Essential . While the rest is important because I use it often in my daily work.
I am in the Environmental Protection Industry and very often, I need to be in the forest. Supervising Forest Restoration for ECO-Community Driven Projects. At times, I have to be deep in the forest which can last from 4 days - 3 weeks.
I carry my Leatherman Charge in my backpack for camp craft, while EDC Key Fob consist of Button Compass / LED / Whistle / Reflective Dog Tags / Fire Steel / Swiss SD Classic . With a File Neck Knife, made by myself. I hope to have SAK for my belt for emergencies situation.
I am comfortable with DIY PINs and other crafts. Not a major issue, as I have got main hand tools to get me by.
-
Doc sounds very much like you need to use the classic MTo approach to this:Buy several,field test them,love them all and start again!
I have the Huntsman Light(Love the inline driver),built a Golfer using a Spartan Light as a basis,and found in dire straits(cue the music boys...)the built in LED is much better than usually thought(had to use it to help find my way arround rural York on a business trip after lending my torch,which I'd only taken as a gut feeling,to the girls in the party),but as folks here have pointed out before,fake Photon mini LEDs are cheap on ebay,and very effective.
My Astronaut is my serios go-to SAK,usually theres a Photon,a glow in the dark paracord lanyard,and a water tight capsual with £10 in it.
-
@kirk13 said:
Doc sounds very much like you need to use the classic MTo approach to this:Buy several,field test them,love them all and start again!I have the Huntsman Light(Love the inline driver),built a Golfer using a Spartan Light as a basis,and found in dire straits(cue the music boys...)the built in LED is much better than usually thought(had to use it to help find my way arround rural York on a business trip after lending my torch,which I'd only taken as a gut feeling,to the girls in the party),but as folks here have pointed out before,fake Photon mini LEDs are cheap on ebay,and very effective.
My Astronaut is my serios go-to SAK,usually theres a Photon,a glow in the dark paracord lanyard,and a water tight capsual with £10 in it.
Kirk13,
I am tempted to go for Explorer and Ranger, take it apart and grab the Wood & Metal File SAW. Leaving the rest as spare parts. On the other hand, I want to maximize in order to get two (2) different SAKs.
I guess I am being GREEDY

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login