What Did You Use Your Multitool For Today?
-
Met some friends last night for dinner and they were coming from an event that needed wristbands. So the Style CS came in handy "unbanding" them.
-
This isn't my story, but it does illustrate how a motivated person with a multitool can get the job done even when working in a demanding situation.
In "War" by Sebastian Junger is the true story about a platoon of Soldiers is dropped on the side of a mountain in the Korengal Valley in Afghanistan. At first they lived in tents surrounded by Hessco walls. Eventually some 2x4's and plywood were delivered, but they weren't given tools to use. They successfully built huts out of the lumber using the multitools that the Army had issued to them.
Can you imagine making multiple cuts on 2x4's using the saw on a multitool? That would be a challenging task under good conditions, but these Soldiers were in firefights every day sometimes multiple times per day.
-
@MeadMaker said:
This isn't my story, but it does illustrate how a motivated person with a multitool can get the job done even when working in a demanding situation.In "War" by Sebastian Junger is the true story about a platoon of Soldiers is dropped on the side of a mountain in the Korengal Valley in Afghanistan. At first they lived in tents surrounded by Hessco walls. Eventually some 2x4's and plywood were delivered, but they weren't given tools to use. They successfully built huts out of the lumber using the multitools that the Army had issued to them.
Can you imagine making multiple cuts on 2x4's using the saw on a multitool? That would be a challenging task under good conditions, but these Soldiers were in firefights every day sometimes multiple times per day.
I love my Blast, I can do pretty much whatever I need with it and whatever I have laying around. Impressive that soldiers could build huts with them though, that is a huge testament to the usefulness of a Multitool and the perseverance of service-people.
-
@MeadMaker said:
This isn't my story, but it does illustrate how a motivated person with a multitool can get the job done even when working in a demanding situation.In "War" by Sebastian Junger is the true story about a platoon of Soldiers is dropped on the side of a mountain in the Korengal Valley in Afghanistan. At first they lived in tents surrounded by Hessco walls. Eventually some 2x4's and plywood were delivered, but they weren't given tools to use. They successfully built huts out of the lumber using the multitools that the Army had issued to them.
Can you imagine making multiple cuts on 2x4's using the saw on a multitool? That would be a challenging task under good conditions, but these Soldiers were in firefights every day sometimes multiple times per day.
I actually cut a 2x4 a few days ago with my SAK Camper. It got the job done but it was not the easiest task I have ever done. I would hate to do more than one.
-
The last few days I've found that the
pry barsflat drivers in the ST300 work great for persuading the "no drip" tops off of liquid laundry detergent bottles, so you can pour out that last bit of detergent
Waste not want not, I like to say.
Or as my wife says: "I can't believe I married such a cheap (insert the common used term for a child born out of wedlock here)"
-
@turnsouth said:
The last few days I've found that thepry barsflat drivers in the ST300 work great for persuading the "no drip" tops off of liquid laundry detergent bottles, so you can pour out that last bit of detergent
Waste not want not, I like to say.
Or as my wife says: "I can't believe I married such a cheap (insert the common used term for a child born out of wedlock here)"
I just fill it a quarter to half way up with water, put the cap back on and shake it. Pour the rest out and your good to go.
-
@captain spaulding said:
The last few days I've found that the
pry barsflat drivers in the ST300 work great for persuading the "no drip" tops off of liquid laundry detergent bottles, so you can pour out that last bit of detergent
Waste not want not, I like to say.
Or as my wife says: "I can't believe I married such a cheap (insert the common used term for a child born out of wedlock here)"
I just fill it a quarter to half way up with water, put the cap back on and shake it. Pour the rest out and your good to go.
Yea but, how does that give you the opportunity to use a MultiTool?

-
@captain spaulding said:
The last few days I've found that the
pry barsflat drivers in the ST300 work great for persuading the "no drip" tops off of liquid laundry detergent bottles, so you can pour out that last bit of detergent
Waste not want not, I like to say.
Or as my wife says: "I can't believe I married such a cheap (insert the common used term for a child born out of wedlock here)"
I just fill it a quarter to half way up with water, put the cap back on and shake it. Pour the rest out and your good to go.
Yea but, how does that give you the opportunity to use a MultiTool?

Very true. :

-
Yes, we must always embrace the opportunity to use a multitool, even if there might be a quicker way. Like when I pop the tops of screwtop beers with my Blast's bottle opener!
-
Today at work I used my Legend 800 to cut metal strapping, used the scissors to cut cable ties, the knife to open boxes, the pliers to twist the ends of a small piece of wire together.
At home I used the saw to cut down three trees (well, more like small shrubs), the scissors to prune a climbing rose bush, and also the scissors to prune a few out of control grape vines. Oh, I also used the cutters to snip the ends off of my jigsaw blades so they will close with no interference.
-
I used my BO sog file to round off some old SAK rivets to disassemble it.
-
My Blast with the bit driver attached was the champ of some Irene cleanup tonight. I used it to dismantle some shelving and a display case, as well as some waterlogged furniture that had to be broken down.
-
I used my blast to pull a shard of metal out of my tire today. I spent the next 20 minutes trying to line up the reamer in the hole, as it was at a pretty good angle and I couldn't get the plug in. My new gerber hatchet came in quite handy as a hammer to push the reamer thru the hole. Plugged and holding air now!
-
@jerseydevil said:
My Blast with the bit driver attached was the champ of some Irene cleanup tonight. I used it to dismantle some shelving and a display case, as well as some waterlogged furniture that had to be broken down.I sure hope no MT's got wet. :(
-
@captain spaulding said:
My Blast with the bit driver attached was the champ of some Irene cleanup tonight. I used it to dismantle some shelving and a display case, as well as some waterlogged furniture that had to be broken down.
I sure hope no MT's got wet. :(
I think we all learned to keep our multitools away from pots of boiling water

-
Spirit pry tool opened a can of paint and awl popped some drain holes around the rim of said can, went through like butter!
-
The scissor spring on my PS4 broke today so I decided to replace the scissors with a cut down key. I used the VIC Mountaineers metal file to ground the key down. A little SAK on Multi violence. >:D Now I just hav to choose a mini flashlight to go with this mini keychain setup, maybe the DQG?



-
I used my Leatheman in an attempt to fix my Gerber.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login