ST 300 owners club
-
As I have been cosying up to the ST300, I've discovered a few observations:
-
As it's been getting "broken in" I noticed that even though the handles are getting a little easier to flex side to side, and that while I've been putting some force on them as I use the drivers, they still spring back to the parallel/even position. Seems to be good resiliency in the steel, unlike an old Surge that I had, where if you put some heavy turning force on the drivers, it always ended up with a little "twist" in the handles that needed to be straightened.
-
Ran some #8 wood screws into some old dry pine, without any pilot holes, and was pleasantly surprised. While the handles had that initial flex as they overlapped slightly, they stayed in that position during use, and gave a firm, controlled, solid feel.
-
Did some whittling with the plane edge, and it was somewhat of a unusual experience. At the end of the cut, as the blade would leave the wood, you can definitely feel the spring in the steel in the form micro vibrations. It did only take a few minutes of use before getting accustom to it and it became unnoticeable. Wondering though, will the vibrating/shock adsorbing effect increase or decrease hand fatigue... Hmm

-
-
I'm in too. I'm finding the flexy handles when it's closed a bit disconcerting. No problem though as I knew in advance what they're like :-D. I just spent too much time with Vic multis ;-)
-
Has anyone seen the YT video of the fellow disemboweling a ST300 with a cutoff saw? He apparently received it as a warranty exchange, and was quite dissatisfied with the flex.
I'd post it, but it's just too horrid. :'( :ahhh

-
@turnsouth said:
Has anyone seen the YT video of the fellow disemboweling a ST300 with a cutoff saw? He apparently received it as a warranty exchange, and was quite dissatisfied with the flex.I'd post it, but it's just too horrid. :'( :ahhh

Hi TS, I haven't seen it, been searching just now, no joy. Any chance you can post the link?
-
@Magic Bus said:
I'm in too. I'm finding the flexy handles when it's closed a bit disconcerting. No problem though as I knew in advance what they're like :-D. I just spent too much time with Vic multis ;-)I'm finding the more I use them, that flex is feeling more natural (or going unnoticed for the most part).
As well, I'm finding that Leatherman was spot on in their design intention, the flex does give very good tactile feedback. -
I would love to see it as well. Link maybe?
-
Has anyone seen the YT video of the fellow disemboweling a ST300 with a cutoff saw? He apparently received it as a warranty exchange, and was quite dissatisfied with the flex.
I'd post it, but it's just too horrid. :'( :ahhh

Hi TS, I haven't seen it, been searching just now, no joy. Any chance you can post the link?
PMed.
I thinking that posting such a video goes against the philosophy of MT.O

(At least I don't want to post it with out Dunc's, J-sews', or Def's permission)
Anyone else want a PM, just ask

-
A bit harsh eh? :-D cutting it up I mean.
-
I wish I could believe that the flex was designed in deliberately. It feels wrong to me but I don't think function will suffer.
-
Wow, video watched :o. I actually feel a bit sick. Clearly the young man wasn't best pleased with his ST300 but what he did is surly a crime. >:(.
Poor innocent ST300. :'( -
Plus points are superb pliers and drivers.
-
Thats great to hear Turnsouth :-D
-
i have a super tool 300 and it has stamped on it rock australia 2010 from a drilling company over here in western australia
-
Few photos



-
I'm getting used to mine, lovin' it actually.
-
@Magic Bus said:
I'm getting used to mine, lovin' it actually.It is kind of strange how the thing "tends to grow on you".
At first it feels all strange and weird in your hand, but after awhile it's really hard to put down.

EDIT: Oh, by the way, I got another membership card for the club yesterday:

:D
-
Has anyone seen the YT video of the fellow disemboweling a ST300 with a cutoff saw? He apparently received it as a warranty exchange, and was quite dissatisfied with the flex.
I'd post it, but it's just too horrid. :'( :ahhh

Hi TS, I haven't seen it, been searching just now, no joy. Any chance you can post the link?
PMed.
I thinking that posting such a video goes against the philosophy of MT.O

(At least I don't want to post it with out Dunc's, J-sews', or Def's permission)
Anyone else want a PM, just ask

Oop, a bit slow to reply here, but its perfectly fine to post video links here at MTorg.

Bob :)
-
@J-sews said:
Oop, a bit slow to reply here, but its perfectly fine to post video links here at MTorg.
Bob :)OK
WARNING: This video contains scenes of violence, which may be considered shocking, offensive, or controversial. Leading to the possibility of nausea, vomiting, sleeplessness, and incredibly horrible nightmares. It is recommended that those with a weak disposition should refrain from viewing this video.
(*and no "thumbs-up" from Vic fans *
)Leatherman SuperTool 300 vs. Makita
Translation of the video description:
"Was an exchange tool to guarantee quality but it was lousy because only the Flex, Leatherman never again! Now have a Victorinox Spirit is still the right quality!"
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login