Does Black Oxide rust easier?
-
In theory, if the coating is added on top of the standard stainless steel, it should, at the least, maintain the rust resistance of that stainless steel. I have seen, on the internet, people removing or scratching these finishes with no problems regarding rust resistance, so you still should have the original rust resistance.
If the coating is on non stainless steel, or if the process of aplying the coating damages in some way the stainless steel then things will be different....
-
@dks said:
In theory, if the coating is added on top of the standard stainless steel, it should, at the least, maintain the rust resistance of that stainless steel. I have seen, on the internet, people removing or scratching these finishes with no problems regarding rust resistance, so you still should have the original rust resistance.If the coating is on non stainless steel, or if the process of aplying the coating damages in some way the stainless steel then things will be different....
Very true. I did not even think about that. But even if you maintain the rust resistance under the Black Oxide you can still have a major rust issue. I have just been thinking about it because I have been wanting a Black Oxide Swiss Tool. :D
-
Black oxide is actually a form of rust. It's controlled with a chemical that allows the formation of oxide (rust). With this special chemical and heat, it turns black instead of red. Iron oxide (rust) is what happens normally. Ever tried to get rust of something made of steel. It's pretty tough. You can buy over the shelf touchup blackener (it works ok) for the spots that show through. However any acidic substance will hasten the removal process. I have researched thus quite a lot recently that's how I understand it.

-
I have Blued guns before; sounds like a similar process.
-
It is similar. But with stainless steel it adds a couple little extra processes to it.
-
i put car wax on my black oxide MTs to protect em. =)
-
@New_World said:
i put car wax on my black oxide MTs to protect em. =)Turtle Wax?

-
@Xelkos said:
i put car wax on my black oxide MTs to protect em. =)
Turtle Wax?

as long as its non abrasive, I wouldn't worry too much.
-
Ren Wax , White Lightening ( wax based bike chain lube ) do a great job of protecting Blued surfaces . A light application of a hairdryer helps the wax penetrate and bond to any pores .
Chris
-
Great post on defining the black oxide.. Thanks!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login