Cheap and cheerful???
-
Came across this on evilbay.Thought that for £7.50 from HongKong,it might be worth a punt

I'm looking forward to seeing how it does.If it works out well might do for a few crimbo prezzies
-
looks ok for the money kirk, have you a link or sellers name

-
well that is interesting, I look forward to hearing how well it copes. :)
-
looks ok for the money kirk, have you a link or sellers name

cheers Kirk

-
If there ever was a knock-off... :o ;)
Let us know how it holds up..

-
It makes me sick that you guys support a direct copy! ::) Mods: This is my opinion only which Def says I'm allowed.

-
-
You are always welcome to your opinion. In fact, I encourage it. BUT this is a tool, available to buyers and as such, we will cover it. We cover anything and everything in this market. If Peter wants us to discourage discussions about things that may or may not infringe on his designs, then he should contact me personally and I'll be happy to set a "no knockoffs" price for him.
Until then, for the same reason as you are allowed to voice your opinion, everyone else is too.
Def
Sent from my MB860 using Tapatalk
-
@Gadget Guy said:
It makes me sick that you guys support a direct copy! ::) Mods: This is my opinion only which Def says I'm allowed.
Well I'm not generally one for one piece tools, but if I was going to get something like this I probably wouldn't pay more than £10 for it anyway. Atwood wouldn't make/sell me one for a tenner .... so as I see it, I wouldn't be doing him out of any money cos he wasn't going to get it anyway

Then again if I did get a cheapo one and liked it, there would be MORE chance I would then move on to a higher market version. Due to the fact that he sells out on all his items in about 30 seconds flat, I think this is probably doing more good than harm. In fact how many of us only got into knives and tools by starting off at the low end and working up? I know I did. I'd never paid proper money for a proper tool unless I knew it was right for me and worth the investment when put into use. Flip side, I've got quite a few items which were really cheap (Mora, Opinel, SRM) and do the job brilliantly so there's no need to spend big money .... again .... personal opinion

Bottom line: Keep us informed how you get on with it mate - some of us won't pay big bucks for the elite jobbies, but might sacrifice a couple of quid for one of those

-
@Grant Lamontagne said:
You are always welcome to your opinion. In fact, I encourage it. BUT this is a tool, available to buyers and as such, we will cover it. We cover anything and everything in this market. If Peter wants us to discourage discussions about things that may or may not infringe on his designs, then he should contact me personally and I'll be happy to set a "no knockoffs" price for him.Until then, for the same reason as you are allowed to voice your opinion, everyone else is too.
Def
Sent from my MB860 using Tapatalk
Def,
No drama here... I do not agree with supporting fakes, so I will not support a forum that does. Please delete my account when you get a chance.
I feel strongly about this as you know. Take care everyone!!

John
-
Yes I know you do. I feel strongly about not deleting accounts so you will be welcome to come back whenever you want, no hard feelings.
The wonderful thing about a forum is it allows people with different opinions to say what they like or don't like about something, which means the other member s have as much right to talk about this as you have to hate it. We won't change you and you won't change them.
Take care out there buddy.
Def
Sent from my MB860 using Tapatalk
-
Looks good for the price! Still, I was wondering how would 8Cr13MoV perform in such type of tool. Atwood also uses knife Steel and/or Ti, but wouldn't be better to use tool steel like D2? ??? I'm quite a noob in this area, so some clarification will be appreciated!!
-
@Gadget Guy said:
It makes me sick that you guys support a direct copy! ::) Mods: This is my opinion only which Def says I'm allowed.
I don't think it's fair for the forum to decide what we can discuss and/or support. (specific products, not broad subjects).
If this forum would have bashed somebody because they talked about, bought, sold or hooked people up with a knock-off or cheap alternative I would be pissed off.
With all due respect to Atwood and his products, if **he **has a problem with these knock-offs he should do something about it, not us. That doesn't mean I like the idea of these.
Patents and such exist for a reason, but they shouldn't effect freedom of speech.
We've talked about plenty of knock-offs and cheap alternatives before without any ill effects.But as you said, you are entitled to your opinions as we are to ours.
I hope we'll see you around in the future.
-
@Gadget Guy:No personnal ofense has been ment by this post,and equally none has been taken,and I do hope you wont be leaving MTo as a result of this.
Things I would say are this:None of us are too shy about grabing a bargin where we can,and I gotta say it would be cool to say I had a Ti pocket tool,but I really cant afford one,Atwood or otherwise!Nor could I aford to lose one!
Victorinox make great tools at prices for the everyman(and wenger too!).Gerber likewise,but many of us(myself inclueded)tend to slate them for thier efforts.
If it is a case of copyright infringement,then I'm sure we would all support Atwood in any legal efforts for redress,but if no action is being taken then this is on fact the free market in action!
Any one for a beer?
I'm buying! -
Wow, I don't visit this forum often, and I am quite surprised by the degree of acceptance regarding stealing.
I see a few posts regarding the price. So it just comes down to money for you? Doesn't matter if the tool is a blatant copy?
Another post was regarding that Peter should do the leg work to defend his intellectual property. I'm very surprised with this disregard for personal responsibility. "Let somebody else do it" attitude.
So you like the price, so stealing is alright. OK then, I see how general tone of the forum is here. -
I'm starting to feel sorry I ever started this thread!
1)When I bought this tool I had no idea it may have been a rip off of anything else
2)If you can aford a keyring doda that cost the same as a LM Wave,good for you!I cant!As in airguns,I own a small number of chinese clones of famous European guns.Are they theft?I'm not a lawyer,but the owners of the original designs have never sued!
3)I believe everyone is entitled to an opinion,but for smurf sakes guys!!!! -
I am not advocating stealing anyone's designs.
However, this is a forum for discussion of multitools- all of them, be they real or copies. We have discussed knockoff SAKs and Leathermans too, so why the special treatment for Peter?
This forum is not beholden to any manufacturers- it is loyal to it's members, and if they want to discuss a certain tool then so be it.
Def
-
Someone one shouldn't be told that stealing is wrong. Just because someone hasn't sued another yet doesn't mean it is right to steal in the meantime. Right is right, wrong is wrong. People should be doing what is right irregardless of who is aware of that person's actions or not. It shouldn't be left for the LEO, court, lawyer, etc. Use you're $ to do what is right.
Discussing and condoning are two very different things. Sure, discuss the copy. I expect that. I also expected that most people would not be in favor of it and not go and make the purchase. Maybe I'm just the minority here, but it was how I was raised. -
I agree that people should vote with their $$, but you can't be upset when they vote differently than you may.
To be honest, Peter could license some of his designs to a large scale manufacturer and crank out some affordable production versions of his tools while still maintaining his custom, limited run market. The very fact that he hasn't makes me wonder if these copies are really that important to him. If anyone is in contact with Peter they can tell him to contact me by email, through Facebook or through this forum and I will be happy to offer any/all help I can to put him in contact with a company that will do his designs justice.
Add to that the very limited availability of his current line and he's just feeding the copy market. After all, if I want a specific tool and it's not available from him, how else am I supposed to get it?
I'm not condoning or condemning purchasing copies, I'm just suggesting a scenario in which a buyer may feel justified in purchasing a copy. Similar to kit cars- I can't afford a '67 Shelby Cobra myself, but I can afford a VW chassis and a fiberglass body kit.
Individuals are welcome to spend their money any way they like. It's part of living in a free and democratic society. And Multitool.org is dedicated to discussion about tools, regardless of where they come from.
Def
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




