Some pry tools
-
-
@Mr. Whippy said:
Ok...
After numerous failed attempts at free hand drawing, I submit this lame MS Paint drawing. :-\
a general question, the thickness remains in the metric wrench is too thin? can break?
do you think is more useful a bottle opener or a guthook?
The drawing isn't to scale. I'm thinking if the tool is 30 mm in width, the alligator wrench at 13mm still leaves 9 mm on the "straight side" and 8 mm on the "toothed side".
I prefer a guthook. Every tool seems to have a bottle opener (and there's always a ledge around that will work ;))
Overall tool size would be 30 mm by something like 80-90 mm long.
Ideally, the tap hole (a square hole) would be dead center. the 1/4 bit driver hexagonal hole would be between the tap hole and alligator wrench somewhere. -
@Mr. Whippy said:
what is the Tap?
A tap is for cutting (or recutting) the threads in a drilled hole. Typically all tap sizes (for example, M6, M8, M10) will all have the same size square end that a universal tap handle will fit.

thanks
but it is not too specific tool to put on a prybar?
Not for me. I use a tap regularly on the farm. Anytime an old bolt is removed, chasing the threads with a tap helps prevent damage to the threads when a bolt is replaced and helps prevent stripping out the hole. Also, oddly enough, our horses have shoes with tapped holes for interchangeable studs.
-
Here's a crappy drawing that's closer to actual scale of the tool.
(BTW, anyone who wants to chime in on this design, feel free
)
-
Looking at that picture, I think it may be better to have the 1/4 bit driver hole on the other side of the tap hole.
-
interesting, and the thickness?, the size of the tap?
when i have some time i can try to make this pry, if you give me a permission
-
The design has ....
ugliness issues. There I've said it. :-[
I have to think about it more. It just doesn't have the right esthetic yet.
-
Whacha think about this?
-
Here's the other side.
-
Whacha think about this?
That is the tool I've been looking for. Did you make it?
No. If I was still a tool and die maker i would have, but no access to equipment. Go to the web site @ the beginning of this thread(which is in Italian) and email him and see if he still makes them. They are not on his available tools page. Ran me about $60 with shipping from Italy.
-
I drew this in autocad and just wanted to see if i would be able to post it here.

-
What do I think? I'd buy it :D it reminds me of a razel.
Sent from my DROID RAZR using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
