The Beerplumber!
-
Beerplumber and I met up to talk tools yesterday and he had an idea for a mod that was so easy (at least I thought) that I decided to throw some time at it.
He asked for arbor shears and a tap wrench (looks like a open C with a hook on the end) I went ahead and ordered another set of folding shears from http://www.dealextreme.com/p/stainless-steel-garden-scissors-with-nylon-pouch-57319 and went to town on the tap wrench he gave me. He cuts PVC tubing all day long and pruning shears work awesome.
A couple of hours later, the wrench part was done.
There was already a hole in the tool so it needed a locking tab and profiles to fit into the Surge. The hole needed to bored out too.

This wrench replaced the PE blade because BP doesn't really use that blade in favor of the sheep's foot to slice open piping insulation. So the wrench needed to OHO. He says he can open it with one hand, mission accomplished. The second hole is for a thumb stud, I gave him the option of brass or aluminum. He wanted brass, good choice.

First fitting was good, BUT when it open the flat portion of the wrench got caught on the liner lock, dang.

Solution, make a washer that moves with the wrench, increasing the surface area and only engaging the liner lock until the tool's flat portion is clear of it.

Due to the increased thickness, the wrench needed to be thinned down, I also made a tab on the washer to sync it's rotation with the wrench.

The hand off! Moments after assembly, oiling and test motions, I called up Beerplumber and we met up. This is him holding onto it.
You'll notice it had my trade mark three rows of tactical jimping! It's functional for both the use of the wrench and also the deployment.

He promises to give it a test run Monday.
Whenever the shears come in, out go the inside tools and in goes the pruning shear head, like the Arborman.
Caveat: this nothing to do with the the Great Mod Give Away, it came up in conversation and it was and easy mod!
-
Pretty neat!
Any pictures of it with the tap wrench closed? :) -
Dang! forgot to take one, was too excited to pass it off.
I asked BP to take a pic, he'll pass it along and when he does, it'll be here!
-
Yahoo! BP tested it out!

-
Excellent job.

-
I'd say jealous co-workers is one of life's simple pleasures

-
Thanks again Met! Amazing work!
-
@Beerplumber said:
I'd say jealous co-workers is one of life's simple pleasuresI was just about to post this. Hehe
I accept cash and paypal :)
Just gotta wait for the shear head!
-
Oh yah.
OOOHOTTW!!!
(outside opening one hand opening tactical tap wrench!)
-
Are you happy with the location of the brass one-hander stud? (I mean, next time would you move it out farther for more leverage, or does it work fine where it is?)
-
That's great
I love seeing tools that have been modified to suit a specific kind of job
-
Very kewl mod MPC.. 8) 8)
-
I like :D
-
Yup thumb studs a little close but I can flick it open no problem. I use the wrench many times a day so it is actually super useful. And the looks it gets are priceless!
-
nice work metro

-
Good job Eric!!

-
BP sent this today! The Beerplumber in action!

-
The shears I ordered finally came in. I like these ones a lot because the spring is internal, so the aesthetic is much cleaner!
I also got some bear and sons bird shears in too, for size comparison.

Initial expanding of the pivot holes on the shears proved to be easy an they dropped in easy. BUT there was a huge problem, when locked the handles drew too close together and the lock would not disengage.

My solution for this was to make a shim for the shear head to rest on. A 1/16" piece of angle aluminum was milled to fit inside the handle an a hole was drilled to accept a pop rivet. A matching hole was drilled in the handle.



These shims allowed the handles to sit 2" apart when the shears were locked.


A quick squeeze and the head unlocks.

And closed. No gap!

You'll also notice that I added a OHO slot for the blade exchanger.
Just gotta open and close it about 100 times and work out the kinks.
-
I also forgot to mention that there isn't any room in the inside for any tools.
Beerplumber said they would be redundant anyway as he carries another Surge in addition to this.
I will make an aluminum spacer to fill one of the internal tool pivots, but the other side, I'll see about making a hammer type thingy so he can give those beer taps a different kind of tap once and a while.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login