carbon fiber and titanium Super Tinker
-
2-56 is a bit small I think. 3-56 is perfect but it's just too uncommon to find anything useful. I also don't like the idea of tool pivots riding on threads instead of hardened pins. I've logged hours online looking for the perfect sak removable hardware and I think these barrel pins are it for strength and clean look from the outside. Someday when I can afford to have a bunch made I'll just go custom made.
-
Now you got me thinking...
Would brass tubing of 3/32" (2.4mm) diameter work? It has an inside diameter on .066" which can be tapped for 1-86 screws.
I found a place (smallparts.com) that sells this tubing.Just throwing it out there. I don't have the taps or anything, but this might be an option for yourself or some other skilled guys.
-
1-86 is really pushing it, especially with brass pins and aluminum liners. You have to consider the forces that the tools put on the rest of the knife when you use them. On something that's going to feel a lot of torque like the phillips and straight drivers there's a tendency to spread the liners and pop the peened heads of the brass pins through the bushings. With hardened thicker stainless pins that have a precise fit through titanium liners and the tools it acts more like a breaker bar on the tools. The torque is focused on shearing the pins much more than spreading the liners, and the screw heads are there more to hold the pins in place.
In other words, if you take a SAK with an unpeened torqued brass pin running through it and open the cap lifter to 90 degrees, clamp it in a vice and torque it the liners will spread and the pin will bend and shear off. Take one with the 1/8" stainless pins and ti liners with no screws in the torqued pin and do the same and it will snap the driver before the liners spread because you have a mini breaker bar running through that tool pivot and the liners are just a means to hold onto it.
-
I definitely see your point. I've always been afraid to put too much pressure on SAK blades and especially screwdrivers in fear I would spread and damage the knife.
Just trying to come up with a solution that doesn't involve drilling holes in tools. I've also thought about 13ga bicycle spokes. They are 2.34mm in diameter and one end is threaded already. The other end can be threaded as well. The nipples can be cut down to just the head part and screwed onto the threaded ends. Maybe that's more work than is worth it.
-
The Dragonplate carbon fiber is really tough stuff. If I didn't like orange so much I'd EDC CF scales. Weight difference is unnoticeable compared to G10 and they are very similar materials to work with so the price is only $20 less for G10.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login