What Did You Use Your Multitool For Today?
-
Leatherman is my preferred brand, but I have to admit that the Swisstool wrench/bit kit looks very useful.
I took your advice and got my head checked. The shrink said that the fact that I choose Leatherman illustrates that I am not only sane, but I display superior judgement. :D
-
@MeadMaker said:
Leatherman is my preferred brand, but I have to admit that the Swisstool wrench/bit kit looks very useful.I took your advice and got my head checked. The shrink said that the fact that I choose Leatherman illustrates that I am not only sane, but I display superior judgement. :D
:D :D So when's the shrink seeing his shrink then?
:DWell the Ripple (aka Wave Lite) got it's chance to shine today
Nothing too fancy, just ripping some large brass staples out of some packaging so I could inspect the contents. This was at the trade counter of a supplier who had suddenly and without warning rendered himself utterly clueless in the presence of the staples, not quite knowing what to do or what to look for. Right front pocket to the rescue, out pops shiny metal, and before I had even set about the first staple with the pliers ... the slilence from the sales rep was deafening, but the look in the eyes definitely said "I want one". Certainly beats the usual "what you got that for?" game. ::)My young nephew actually collared me a week or so ago (after I'd just completed an array of tasks with the contents of my pockets) and said "You've got EVERYTHING, why do you always have EVERYTHING". I smiled at him and said "Because if I didn't, there'd be something missing".
He seemed quite happy with that answer :)
-
@50ft-trad said:
My young nephew actually collared me a week or so ago (after I'd just completed an array of tasks with the contents of my pockets) and said "You've got EVERYTHING, why do you always have EVERYTHING". I smiled at him and said "Because if I didn't, there'd be something missing".He seemed quite happy with that answer :)
:D
-
Used my Wave to remove and install a new car battery for my sister

-
I used my Vic Camper to open a few adult refreshments. :D
-
Had to cut a 2" price of PVC pipe today. Hacksaw was two blocks away in the truck so I threw an aggressive bi-metal blade into the surge blade exchanger and presto on with the task!
-
That tool holder on the Surge has almost limitless possibilities.
-
:D
-
Used my KF4 to open the packaging on another KF4 :D
-
My 98 Wave saw quite a bit of use today pulling packing staples and cutting tape on shipments. Fantastic tool!
-
I left the house today without a multi on my belt, whoops! And, of course, I needed pliers several times today. Fortunately, it was all light duty work, and I had my Deluxe Tinker in my pocket! The pliers got their baptism of fire by pulling lid clips off several gallon cans, loosening and then tightening the cap on a tint machine nozzle, and, along with the Phillips, put together a display rack. That SAK certainly proved its' worth today!
-
@jerseydevil said:
I left the house today without a multi on my belt, whoops! And, of course, I needed pliers several times today. Fortunately, it was all light duty work, and I had my Deluxe Tinker in my pocket! The pliers got their baptism of fire by pulling lid clips off several gallon cans, loosening and then tightening the cap on a tint machine nozzle, and, along with the Phillips, put together a display rack. That SAK certainly proved its' worth today!That is one tried and true rule, if you don't have a Multi, you WILL need pliers. I use mine all the time for tons of stuff that you would never think of. I can't leave my house without a pliers MT and a SAK or utility blade.
Glad to see the Deluxe tinker worked so well though, my uncle just got one and he loves it!
-
I just love when I get job done with my multi in front of 5-6 :o :o faces!!
Yesterday we started home from work in our truck (small pickup like truck - Russian made Gazelle) and check engine lit on board. so we got out and pop open the front to see. There were small rubber hose broke. I pulled out my CT41 and put the philips bit to unscrew clout http://www.alati.hr/web3/components/com_virtuemart/shop_image/product/__elna_4bbb27b70d6b3.jpg (this is from google translate
) but my coworker pulled out the hose and lost it.... So....

I found a peace of copper wire, cut it w/wire cutters, cut the bad peace of hose w/blade, put it on place and secure it with wire instead of clout. Put the wire arround hose and twist ends w/pliers untill it was tight enough.... :D :D
Let's get back on beginning, when I pulled out CT41 they all started giggling and poking me, but by the time I finished, they were all :o :o

-
My bandmate repaired his saxophone utilizing my Wave. There was a small spring that had popped out, and he used the pliers to put it back in its place.
-
@edcgear said:
I just love when I get job done with my multi in front of 5-6 :o :o faces!!Yesterday we started home from work in our truck (small pickup like truck - Russian made Gazelle) and check engine lit on board. so we got out and pop open the front to see. There were small rubber hose broke. I pulled out my CT41 and put the philips bit to unscrew clout http://www.alati.hr/web3/components/com_virtuemart/shop_image/product/__elna_4bbb27b70d6b3.jpg (this is from google translate
) but my coworker pulled out the hose and lost it.... So....

I found a peace of copper wire, cut it w/wire cutters, cut the bad peace of hose w/blade, put it on place and secure it with wire instead of clout. Put the wire arround hose and twist ends w/pliers untill it was tight enough.... :D :D
Let's get back on beginning, when I pulled out CT41 they all started giggling and poking me, but by the time I finished, they were all :o :o

did no-one in Serbia ever watch McGyver? :D Nicely done BTW.

-
I don't remember that show being broadcasted here....
I have heard of McGuyver here. And I've allways been a tech-gadged geek....

-
@jerseydevil said:
I left the house today without a multi on my belt, whoops! And, of course, I needed pliers several times today. Fortunately, it was all light duty work, and I had my Deluxe Tinker in my pocket! The pliers got their baptism of fire by pulling lid clips off several gallon cans, loosening and then tightening the cap on a tint machine nozzle, and, along with the Phillips, put together a display rack. That SAK certainly proved its' worth today!Tint machine, lid clips, those are familiar words. I spent 14 years working in our family's paint store before the days of color matching computers. It would have been very handy to have an MT on my belt.
-
I used my Explorer Plus' magnifier to read a couple tang stamps and to compare the lengths of a couple knives at an antique show today. Ended up getting a mint condition light aqua glass transformer globe... I could've gotten an excellent condition lavender one, though, for probably $35... I kinda regret not getting it. Still, it'd be a pricey paper weight over the $3 I have in the one I purchased. ._.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login